Interfacial passivation towards attainment of efficient and stable carbon-based CsPbIBr2 perovskite solar cells at ambient air
Source abstract
Abstract
Inorganic perovskite solar cells (IPSCs) based on CsPbIBr 2 absorber are the recent research interest of solar cell researchers because of their exceptional thermal stability and opto-electronic features. In addition, the perovskite films can be easily optimized by simple solution processing techniques even in open air. However, they encounter several defects on the surface that deteriorate interfacial quality and hamper device performance as well as stability. These defects are usually minimized by surface passivation. Herein, carbon-based IPSCs (C–IPSCs) have been fabricated without a hole-transport layer (HTL) under ambient condition (70 % RH; RT) with different concentration of a novel green deep eutectic solvent (DES) as a passivation layer on CsPbIBr 2 (prepared at low temperature) to reduce the defects. Their structural, morphological, optical, electrical, and photovoltaic properties have been analyzed and compared with that of pristine C–IPSCs. The optimal concentration of DES resulted in defect-controlled morphology with enhanced crystallinity and energy level matching. The uncoordinated Pb 2+(Cs + ) and halide vacancies on the surface of CsPbIBr 2 (processed in humid air) are well treated because of the ionic nature of DES. This may also reduce the energy loss at perovskite-carbon interface and thereby the cause of subsequent enhanced charge transfer and efficiency of champion device from 4.73 % to 7.04 % with high photovoltage, fill-factor, current-density, and reduced hysteresis. Also, demonstrated with significantly improved resistance to heat and humidity. Hence, this work may give better understanding to attain higher photovoltaic performance and stability of C–IPSCs in a realistic ambient environment for commercialization through simple solution processing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Defect passivation strategies in perovskites for an enhanced photovoltaic performance10.1039/D0EE01767A ↗
2. Nanomechanical signatures of degradation-free influence of water on halide perovskite mechanics10.1038/s43246-022-00287-7 ↗
3. A-site rubidium cation-incorporated CsPbI2Br all-inorganic perovskite solar cells exceeding 17% efficiency10.1002/solr.202000164 ↗
4. Inorganic halide perovskite solar cells: progress and challenges10.1002/aenm.202000183 ↗
5. Inorganic perovskite solar cells: an emerging member of the photovoltaic community10.1039/C9TA06674H ↗
6. Solvent-engineering-processed CsPbIBr2 inorganic perovskite solar cells with efficiency of ∼11
7. Low-temperature preparation achieving 10.95%-efficiency of hole-free and carbon-based all-inorganic CsPbI3 perovskite solar cells10.1016/j.jallcom.2020.158454 ↗
8. Low-temperature carbon-based electrodes in perovskite solar cells10.1039/D0EE02175J ↗
9. A multifunctional CuSCN interlayer in carbon electrode-based CsPbIBr2all-inorganic perovskite solar cells for boosting the efficiency and stability10.1039/D0SE00479K ↗
10. Efficient and carbon-based hole transport layer-free CsPbI2Br planar perovskite solar cells using PMMA modification10.1039/C9TC00374F ↗
11. Achievable high: Voc of carbon based all-inorganic CsPbIBr2 perovskite solar cells through interface engineering10.1039/C8TA09838G ↗
12. Efficient and stable carbon-based CsPbIBr2 perovskite solar cells by 4-aminomethyltetrahydropyran acetate modification
13. Defects and passivation in perovskite solar cells
14. Low-temperature crystallization and growth of CsPbIBr2 films through PbX2-DMSO adduct towards stable and efficient carbon-based all-inorganic perovskite solar cells10.1002/er.7807 ↗
15. Aged precursor solution toward low-temperature fabrication of efficient carbon-based all-inorganic planar CsPbIBr2 perovskite solar cells10.1021/acsaem.8b00972 ↗
16. Ambient-air fabrication of efficient and stable carbon-based inorganic perovskite solar cell based on CsPbIBr2 film via organic salt passivation10.1016/j.solener.2022.09.022 ↗
17. Low temperature-processed stable and high-efficiency carbon-based CsPbI2Br perovskite solar cells by additive strategy10.1016/j.orgel.2022.106463 ↗
18. Interface engineering for all-inorganic CsPbIBr2 perovskite solar cells with enhanced power conversion efficiency over 1110.1002/ente.202100562 ↗
19. Interface engineering of imidazolium ionic liquids toward efficient and stable CsPbBr3 perovskite solar cells10.1021/acsami.9b20831 ↗
20. Enhancing the performance of perovskite solar cells via interface modification10.1007/s10853-019-03898-7 ↗
21. Double-side modification strategy for efficient carbon-based, all-inorganic CsPbIBr2 perovskite solar cells with high photovoltage10.1016/j.jmat.2022.09.005 ↗
22. Novel C3N4-assisted bilateral interface engineering for efficient and stable perovskite solar cells10.1021/acs.langmuir.2c02191 ↗
23. In situ formation of inorganic healing overlayer for interface-stabilized all-inorganic CsPbIBr2 perovskite solar cells10.1039/D2CC05993B ↗
24. A nanofibrillar conjugated polymer film as an interface layer for high-performance CsPbIBr2 solar cells with efficiency exceeding 1110.1039/D2SE00357K ↗
25. Scalable ambient fabrication of high-performance CsPbI2Br solar cells10.1016/j.joule.2019.07.015 ↗
26. PEG modified CsPbIBr2 perovskite film for efficient and stable solar cells10.1002/admi.202000537 ↗
27. All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 1510.1038/s41467-018-07485-3 ↗
28. Simultaneously enhanced efficiency and ambient stability of inorganic perovskite solar cells by employing tetramethylammonium chloride additive in CsPbI2Br10.1016/j.jmst.2021.05.084 ↗
29. CoCl2 as film morphology controller for efficient planar CsPbIBr2 perovskite solar cells10.1016/j.electacta.2020.136162 ↗
30. High-performance cspbibr2 perovskite solar cells: effectively promoted crystal growth by antisolvent and organic ion strategies10.1021/acsami.9b09171 ↗
31. The benefits of ionic liquids for the fabrication of efficient and stable perovskite photovoltaics10.1016/j.cej.2021.128461 ↗
32. Ionic liquid engineering in perovskite photovoltaics
33. Choline chloride-based deep eutectic solvents as effective electrolytes for dye-sensitized solar cells10.1039/D1RA03273A ↗
34. Hydrophobic deep eutectic solvents in microextraction techniques–A review10.1016/j.microc.2019.104384 ↗
35. Defects in lead halide perovskite nanocrystals: analogies and (many) differences with the bulk10.1021/acsenergylett.9b01945 ↗
36. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
37. Choline chloride-based deep eutectic solvents as effective electrolytes for dye-sensitized solar cells10.1039/D1RA03273A ↗
38. Choline chloride-modified SnO2Achieving high output voltage in MAPbI3Perovskite solar cells10.1021/acsaem.0c00038 ↗
39. Enhancement of photoelectric performance for CsPbI2Br solar cells by the synergistic effect of binary additives10.1016/j.jmat.2022.09.006 ↗
40. Highly stable all-inorganic CsPbIBr2Perovskite solar cells with 11.30% efficiency using crystal interface passivation10.1021/acsaem.0c00678 ↗
41. Surface reconstruction strategy improves the all-inorganic CsPbIBr2 based perovskite solar cells and photodetectors performance10.1016/j.nanoen.2022.106960 ↗
42. A mixed antisolvent-assisted crystallization strategy for efficient all-inorganic CsPbIBr2Perovskite solar cells by a low-temperature process10.1021/acsaem.1c03554 ↗
43. High-efficiency CsPbI 2 Br perovskite solar cells with over 83% fill factor by synergistic effects of a multifunctional additive10.1021/acs.inorgchem.2c04316 ↗
44. Enhanced efficiency and thermal stability of mesoscopic perovskite solar cells by adding PC70BM acceptor10.1016/j.solmat.2019.110130 ↗
45. Perovskite solar cells: a deep analysis using current–voltage and capacitance–voltage techniques10.1007/s10854-018-0390-5 ↗