journal article·2022-11

Improvement of green antisolvent-isopropanol and additive-thiourea on carbon based CsPbIBr2 perovskite solar cells

Qingchen He, Haiming Zhang, Siqi Han, Yuwen Xing, Yujie Li, Xianjing Zhang, Rufeng Wang

Publisher page

Abstract

In recent years, all-inorganic perovskite cells (PSCs) have been widely studied by researchers because of their excellent thermal and optical stability. Among them, the CsPbIBr 2 PSCs with carbon electrode have attracted extensive attention because of its excellent stability, low preparation difficulty, easy commercialization and low cost. However, the crystal quality of CsPbIBr 2 film is poor. There are a large number of pinholes and surface defects (Pb 2+ exposure), which will lead to internal short circuit and a large number of nonradiative recombination, thus affecting the photoelectric conversion efficiency (PCE). Although these problems can be improved by antisolvent engineering, the traditional antisolvent chlorobenzene (CB) and toluene (TL) are highly toxic and harmful to the environment. In this paper, isopropanol (IPA) is used as a green antisolvent to improve the quality of CsPbIBr 2 films, and S 2− with strong reducibility and passivation defects are successfully introduced into the CsPbIBr 2 film surface by further adding thiourea as Lewis base to IPA (IPA-S). After the CsPbIBr 2 films were treatment by IPA-S antisolvent, we successfully obtained high-quality CsPbIBr 2 films with large grain size and no pinholes. Moreover, through XPS, PL, EIS and other tests, it is found that the S 2− introduced by IPA-S can combine with the exposed Pb 2+ on the CsPbIBr 2 surface to passivate the defects, it is beneficial to reduce the non-radiative recombination and improve the transport capacity of carriers. Finally, the results of this paper prove that that the champion PCE of carbon based CsPbIBr 2 PSCs treated with IPA-S antisolvent was 6.79%, which was nearly 30% higher than the original carbon based CsPbIBr 2 PSCs. In addition, due to the strong reducibility of S 2−, the carbon based CsPbIBr 2 PSCs treated with isopropanol antisolvent added with thiourea can continue to work in air with 40% relative humidity, and the efficiency can remain 85% within 10 days. In order to improve the performance and stability of the all-inorganic PSCs, this paper provides a non-toxic, environmentally friendly and effective scheme.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Xanthate-induced sulfur doped all-inorganic perovskite with superior phase stability and enhanced performance10.1016/j.nanoen.2019.02.049 ↗
2. Effects of annealing temperature on decaphenylcyclopentasilane-inserted CH3NH3PbI3 perovskite solar cells10.1016/j.cplett.2019.136822 ↗
3. Carbon-based, novel triple cation mesoscopic perovskite solar cell fabricated entirely under ambient air conditions10.1016/j.matlet.2020.127621 ↗
4. Synthesis of perovskite film by using lead nitrate as precursor for perovskite solar cell applications10.1016/j.matpr.2019.06.002 ↗
5. Necessity of thoracotomy in pulmonary metastasis of osteosarcoma10.21037/jtd.2019.07.65 ↗
6. Suppressing intrinsic self-doping of CsPbIBr2 films for high-performance all-inorganic, carbon-based perovskite solar cells10.1039/D0SE00774A ↗
7. Promoting the efficiency and stability of CsPbIBr2-based all-inorganic perovskite solar cells through a functional Cu2+ doping strategy10.1021/acsami.0c04938 ↗
8. Room-temperature carbon electrodes with ethanol solvent interlacing process for efficient and stable planar hybrid perovskite solar cells10.1016/j.egyr.2021.04.031 ↗
9. A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells10.1016/j.jcis.2021.07.122 ↗
10. Guo, M.; Wei, C.; Liu, C.; Zhang, K.; Su, H.; Xie, K.; Zhai, P.; Zhang, J.; Liu, L. Composite electrode based on single-atom Ni doped graphene for planar carbon-based perovskite solar cells. MATERIALS & DESIGN 2021, 209.10.1016/j.matdes.2021.109972 ↗
11. Carbon electrodes in perovskite photovoltaics
12. Size mismatch induces cation segregation in CsPbI3: forming energy level gradient and 3D/2D heterojunction promotes the efficiency of carbon-based perovskite solar cells to over 15%
13. Imperfections and their passivation in halide perovskite solar cells10.1039/C8CS00853A ↗
14. Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation10.1039/C5EE01265A ↗
15. Defect activity in metal-halide perovskites10.1002/adma.201901183 ↗
16. Defect activity in metal halide perovskites with wide and narrow bandgap10.1038/s41578-021-00331-x ↗
17. Self-seeding growth for perovskite solar cells with enhanced stability10.1016/j.joule.2019.03.023 ↗
18. Novel insight into the role of chlorobenzene antisolvent engineering for highly efficient perovskite solar cells: gradient diluted chlorine doping10.1021/acsami.8b17338 ↗
19. Uniform, stable, and efficient planar-heterojunction perovskite solar cells by facile low-pressure chemical vapor deposition under fully open-air conditions10.1021/am5077588 ↗
20. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
21. Reddy, V. P.; Maniyarasu, S.; Dileep, R. K.; Battula, R. K.; Bhaskar, P. U.; Ramasamy, E.; Veerappan, G. Temperature dependence of MAPbI3 films by quasi-vapor deposition technique and impact on photovoltaic performance and stability of perovskite solar cells. J. Alloy. Compd. 2021, 888.10.1016/j.jallcom.2021.161448 ↗
22. Pathipati, S. R. Vacuum-assisted low-temperature growth of perovskite nanocrystals reaching near-unity photoluminescence quantum yield. J. Lumin. 2021, 239.10.1016/j.jlumin.2021.118345 ↗
23. Enhanced photovoltage for inverted planar heterojunction perovskite solar cells10.1126/science.aap9282 ↗
24. Methylamine-gas-Induced defect-healing behavior of CH3NH3PbI3 thin films for perovskite solar cells10.1002/anie.201504379 ↗
25. Enhancing the stability and crystallinity of CsPbIBr2 through antisolvent engineering10.1007/s10853-021-06552-3 ↗
26. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
27. A survey of solvent selection guides10.1039/C4GC01149J ↗
28. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture10.1126/science.aat3583 ↗
29. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
30. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
31. Structural and chemical evolution of methylammonium lead halide perovskites during thermal processing from solution10.1039/C6EE01047D ↗
32. Efficient passivation of hybrid perovskite solar cells using organic dyes with -COOH functional group
33. Buried interfaces in halide perovskite photovoltaics
34. Imperfections and their passivation in halide perovskite solar cells10.1039/C8CS00853A ↗
35. Graded heterojunction of perovskite/dopant-free polymeric hole-transport layer for efficient and stable metal halide perovskite devices10.1016/j.nanoen.2020.105159 ↗
36. Promoting perovskite crystal growth to achieve highly efficient and stable solar cells by introducing acetamide as an additive10.1039/C8TA02121J ↗
37. Improving performance of perovskite solar cells based on ZnO nanorods via rod-length control and sulfidation treatment10.1016/j.mssp.2020.105205 ↗
38. Manipulated crystallization and passivated defects for efficient perovskite solar cells via addition of ammonium iodide10.1021/acsami.1c05903 ↗
39. Effects of inorganic surface blocking layer of SnS on the performance and stability of perovskite solar cells10.1016/j.mssp.2020.105224 ↗
40. High-efficiency, hysteresis-less, UV-stable perovskite solar cells with cascade ZnO–ZnS electron transport layer10.1021/jacs.8b11001 ↗
41. PEG modified CsPbIBr2 perovskite film for efficient and stable solar cells10.1002/admi.202000537 ↗
42. Low-temperature crystallization of CsPbIBr2 perovskite for high performance solar cells10.1002/solr.202000254 ↗
43. Interface modulator of ultrathin magnesium oxide for low-temperature-processed inorganic CsPbIBr2 perovskite solar cells with efficiency over 11%10.1002/solr.202000226 ↗
44. Combustion-processed NiO/ALD TiO2 bilayer as a novel low-temperature electron transporting material for efficient all-inorganic CsPbIBr2 solar cell10.1016/j.solener.2020.04.024 ↗
45. Solution-processed amino acid modified SnO2 electron transport layer for carbon-based CsPbIBr2 perovskite solar cells
46. Quantum dot interface-mediated CsPbIBr2 film growth and passivation for efficient carbon-based solar cells
47. Interfacial voids trigger carbon-based, all-inorganic CsPbIBr2 perovskite solar cells with photovoltage exceeding 1.33 V
48. p-Type charge transfer doping of graphene oxide with NiCo(1-y)FeyOx for air-stable, all-inorganic CsPbIBr2 perovskite solar cells10.1002/anie.202016703 ↗