journal article·2017-04

High power impulse magnetron sputtered p-type γ-titanium monoxide films: Effects of substrate bias and post-annealing on microstructure characteristics and optoelectrical properties

Wu-Chang Peng, Ying-Hung Chen, Jing-Yu Chen, Ju-Liang He, Dong-Sing Wuu

Publisher page

Abstract

Abstract In view of wide potential use as p-type oxide semiconductor of titanium monoxide (TiO), it is deposited in this work by using high power impulse magnetron sputtering (HIPIMS), which is known to provide less hysteresis effect in reactive sputtering and better control in stoichiometry. A strong correlation among the preparation parameters on the microstructure and optoelectrical characteristics of the obtained Ti-O films are investigated. Experimental results show that the crystallinic cubic γ-TiO can be directly grown on unheated glass substrate. In regard to the effects of substrate bias and post-annealing, the as-grown γ-TiO transfers into rutile (R-TiO 2 ) at a critical substrate bias voltage of −125 V or post-annealing temperature of 500 °C. For the purpose of p-type channel layer in transistor, the optimum γ-TiO film exhibiting a high hole mobility of 8.2 cm 2 /V s is grown at the substrate bias voltage of −25 V and followed by the post-annealing at 400 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Semiconductor materials and devices · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Recent developments in the field of transparent conductive oxide films for spectral selective coatings, electronics and photovoltaics10.1016/j.cap.2012.07.022 ↗
2. Review of recent developments in amorphous oxide semiconductor thin-film10.1016/j.tsf.2011.07.018 ↗
3. An amorphous oxide semiconductor thin-film transistor route to oxide electronics10.1016/j.cossms.2013.07.002 ↗
4. Amorphous oxide channel TFTs10.1016/j.tsf.2007.03.161 ↗
5. Asymmetric fingered polysilicon p-channel thin film transistor structure for kink effect suppression10.1016/j.tsf.2006.11.093 ↗
6. p-channel thin-film transistor using p-type oxide semiconductor, SnO10.1063/1.2964197 ↗
7. Epitaxial growth of high mobility Cu2O thin films and application to p-channel thin film transistor10.1063/1.3026539 ↗
8. p-channel thin-film transistors based on spray-coated Cu2O films10.1063/1.4803085 ↗
9. p Channel thin film transistor and complementary metal-oxide-silicon inverter made of microcrystalline silicon directly deposited at 320°C10.1016/S0022-3093(99)00799-1 ↗
10. Vacancies on the Ti sublattice in titanium monoxide TiOy studied using positron annihilation techniques10.1103/PhysRevB.75.094107 ↗
11. Vacancies in ordered and disordered titanium monoxide: mechanism of B1 structure stabilization10.1016/j.jssc.2013.05.036 ↗
12. Mechanical and electrical properties of fcc TiO1+x thin films prepared by r.f. reactive sputtering10.1016/S0257-8972(98)00629-X ↗
13. Structural, morphological and optical properties of thermal annealed TiO thin films10.1016/j.tsf.2007.07.195 ↗
14. Optical constants of titanium monoxide TiO thin films10.1016/j.jallcom.2007.10.059 ↗
15. Titanium monoxide ultra-thin coatings evaporated onto polycrystalline copper films10.1016/j.vacuum.2004.05.005 ↗
16. Microstructure and properties of nanocrystalline titanium monoxide films synthesized by inductively coupled plasma assisted reactive direct current magnetron sputtering10.1016/j.apsusc.2008.07.108 ↗
17. High power pulsed magnetron sputtering: a review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
18. HiPIMS "goes production", actual status & outlook
20. Effect of bias voltage on TiAlSiN nanocomposite coatings deposited by HiPIMS10.1016/j.apsusc.2016.09.028 ↗
21. Effect of negative substrate bias voltage on the structure and properties of CrN films deposited by modulated pulsed power (MPP) magnetron sputtering10.1088/0022-3727/44/42/425305 ↗
22. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
23. Photocatalytic TiO2 film prepared using arc ion plating10.1016/j.surfcoat.2004.08.215 ↗
24. Synthesis and characterization of conductive titanium monoxide films. Diffusion of silicon in titanium monoxide films10.1016/S0042-207X(98)00149-3 ↗
25. Low temperature preparation of phase-tunable and antimicrobial titanium dioxide coating on biomedical polymer implants for reducing implant-related infections10.1016/j.surfcoat.2011.05.001 ↗
26. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
27. X-ray photoelectron spectroscopy (XPS) studies of clean and hydrated TiO2 (rutile) surfaces10.1016/0009-2614(79)87231-0 ↗
28. XPS characterization of surface and interfacial structure of sputtered TiNi films on Si substrate10.1016/j.msea.2005.04.036 ↗
29. Ti 2p and O 1s core levels and chemical bonding in titanium-bearing oxides10.1016/j.elspec.2006.02.004 ↗
30. The O–Ti (oxygen–titanium) system10.1007/BF02873201 ↗
31. Effect of peak power in reactive high power impulse magnetron sputtering of titanium dioxide10.1016/j.surfcoat.2011.04.071 ↗
32. Physical properties of homogeneous TiO2 films prepared by high power impulse magnetron sputtering as a function of crystallographic phase and nanostructure10.1088/0022-3727/42/10/105204 ↗
33. Effects of nitrogen doping on optical properties of TiO2 thin films10.1007/s00339-004-3101-4 ↗
34. N-doped titanium monoxide nanoparticles with TiO rock-salt structure, low energy band gap, and visible light activity10.1021/cm100653q ↗
35. Band gap engineered TiO2 nanoparticles for visible light induced photoelectrochemical and photocatalytic studies10.1039/C3TA14052K ↗