Exploring the dopant effects on the structural, magnetic, optoelectronic, and thermoelectric properties of Ba2CaMoO6: A detailed Ab-initio investigation
Source abstract
Abstract
We have conducted a thorough investigation into the properties of Ba 2CaMoO 6 under hole and electron doping conditions using an ab-initio approach. We have confirmed the structural and phase stability of all compounds by calculating their enthalpy of formation, cohesive energy, and Goldschmidt tolerance factor. Spin-polarized computations reveal Nb- and Tc-doped compounds display half metallic ferromagnetism, with a considerable bandgap of 2.6 eV ( ↑ ) and 2.0 eV ( ↓ ) channels as compared to its non-magnetic pristine counterpart, respectively. These findings are of great interest for spintronics applications. In addition, the optoelectronic properties were assessed using optical response parameters, yielding exceptional results in all three situations. The perovskites exhibit a significant increase in their potential for photovoltaic cell applications due to their high absorption coefficient, particularly in the ultraviolet region. At last, we have calculated the thermoelectric parameters to offer a thorough understanding of the figure of merit. The figure of merit reaches its maximum value of 1 for the pristine case. However, for the Nb- and Tc-doped cases, the figure of merit is significantly lower, measuring 0.4 and 0.1 at room temperature, respectively. Therefore, our findings indicate that these materials hold great promise for use in spintronics, solar cells, and thermoelectric applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Magnetic and transport properties of perovskites and related materials · Heusler alloys: electronic and magnetic properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. High performance bulk thermoelectrics via a panoscopic approach10.1016/j.mattod.2013.05.004 ↗
2. A review on nanostructures of high-temperature thermoelectric materials for waste heat recovery10.1016/j.rser.2016.06.035 ↗
3. Double perovskite (Sr2B′B′′O6) oxides for high-temperature thermoelectric power generation—A review10.1557/jmr.2018.376 ↗
4. A review of solar thermal refrigeration and cooling methods10.1016/j.rser.2013.03.024 ↗
5. A review of energy sources and energy management system in electric vehicles10.1016/j.rser.2012.11.077 ↗
6. Recent progress in stabilizing hybrid perovskites for solar cell applications10.1016/j.jpowsour.2017.04.025 ↗
7. Extensive investigation of structural, electronic, optical, and thermoelectric properties of hybrid perovskite (CH3NH3PbBr3) with mechanical stability constants10.1002/er.5786 ↗
8. Synthesis and thermoelectric characterization of Bi2Te3 nanoparticles10.1002/adfm.200901261 ↗
9. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
10. Preparation and thermoelectric properties of semiconducting Zn3Sb310.1016/S0022-3697(96)00228-4 ↗
11. Synthesis and thermoelectric properties of Bi2Se3 nanostructures
12. Anomalous thermoelectric power as evidence for two-valence bands in SnTe10.1103/PhysRev.131.104 ↗
13. Modeling and simulation of multifaceted properties of X2NaIO6 (X=Ca and Sr) double perovskite oxides for advanced technological applications10.1007/s00894-023-05786-z ↗
14. Computational investigation of the fundamental physical properties of lead-free halide double perovskite Rb2NaCoX6 (X=Cl, Br, and I) materials: Potential prospects for sustainable energy10.1142/S0217984924503238 ↗
15. Rare earth-based oxides double perovskites A2NiMnO6 (A=La and Gd): applications in magneto-caloric, photo-catalytic and thermoelectric devices10.1016/j.physb.2023.415645 ↗
16. Lead-free alternative cation (Ethylammonium) in organometallic perovskites for thermoelectric applications10.1007/s00894-024-05867-7 ↗
17. Electronic structure, theoretical power conversion efficiency, and thermoelectric properties of bismuth-based alkaline earth antiperovskites10.1007/s00894-023-05732-z ↗
18. Exploring properties of organometallic double perovskite (CH3NH3)2AgInCl6: A novel material for energy conversion devices10.1142/S0217984924501446 ↗
19. First-principles simulation: ideas, illustrations and the CASTEP code
20. A universal preconditioner for simulating condensed phase materials10.1063/1.4947024 ↗
21. Restoring the density-gradient expansion for exchange in solids and surfaces10.1103/PhysRevLett.100.136406 ↗
22. Assessing the performance of recent density functionals for bulk solids10.1103/PhysRevB.79.155107 ↗
23. Optimized and transferable nonlocal separable ab initio pseudopotentials10.1103/PhysRevB.47.4174 ↗
24. Ground-state properties of CoSi2 determined by a total-energy pseudopotential method10.1103/PhysRevB.49.16300 ↗
25. Iterative minimization techniques for ab initio total-energy calculations: molecular dynamics and conjugate gradients10.1103/RevModPhys.64.1045 ↗
26. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
27. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
28. BoltzTraP. A code for calculating band-structure dependent quantities10.1016/j.cpc.2006.03.007 ↗
29. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials
30. Deformation potentials and mobilities in non-polar crystals10.1103/PhysRev.80.72 ↗
31. Low temperature structural phase transition in the Ba2CaMoO6 perovskite10.1016/j.jssc.2019.06.037 ↗
32. First principles calculations of transition metal binary alloys: Phase stability and surface effects10.1007/s11664-017-5402-3 ↗
33. Hydrogen embrittlement of C40 transition-metal disilicides10.1557/jmr.2019.199 ↗
34. Nickel incorporation in perovskite-type metal oxides–implications on reducibility10.1016/j.actamat.2018.11.004 ↗
35. Crystal structure refinement and stability of LaFexNi1−xO3 solid solutions10.1006/jssc.1997.7477 ↗
36. Local electronic and geometrical structure of LaNi1−xMnxO3 perovskites determined by x-ray-absorption spectroscopy10.1103/PhysRevB.65.144409 ↗
37. The perovskite structure—a review of its role in ceramic science and technology10.1007/s100190000062 ↗
38. Material properties of perovskites in the quasi-ternary system LaFeO3–LaCoO3–LaNiO310.1016/j.jssc.2016.01.024 ↗
39. Khattak · 1979
40. Chemical structures and performance of perovskite oxides10.1021/cr980129f ↗
41. The effect of the state of pd on methane combustion in Pd-doped LaFeO310.1021/jp911052s ↗
42. Optical response of high temperature superconductors by full potential LAPW band structure calculations10.1016/0921-4526(94)91225-4 ↗
43. Structural stability and evolution of half-metallicity in Ba2CaMoO6: interplay of hole-and electron-doping10.1039/D1CP03247J ↗
44. A DFT study of structural, elastic, thermodynamic, magneto-optical, and electrical properties of double-perovskite Bi2CrMO6(M=Zn, Ni) using GGA and TB-mBj functionals10.1007/s10948-021-05938-3 ↗
45. Electronic, magnetic, optical and thermoelectric properties of Ca2Cr1−xNixOsO6 double perovskites10.1039/C9RA10775D ↗
46. Ground state structural, lattice dynamic, thermodynamic and optical properties of the Ba2CaMoO6 ordered perovskite
47. The electronic, magnetic, and optical properties of double perovskite La2BB′O6(B=Cr, V and B’=Co, Ni and Sc)10.1039/D2RA06710B ↗
48. Calculated optical properties of Si, Ge, and GaAs under hydrostatic pressure10.1103/PhysRevB.54.2480 ↗
49. Spin-induced optical phenomena in diluted magnetic semiconductors
50. Linear optical properties of solids within the full-potential linearized augmented planewave method10.1016/j.cpc.2006.03.005 ↗
51. Causality and the dispersion relation: logical foundations10.1103/PhysRev.104.1760 ↗
52. Dressel · 2002
53. Optoelectronic properties of germanium iodide perovskites AGeI3(A= K, Rb and Cs): first principles investigations10.1007/s11082-019-1949-y ↗
54. Wave-number-dependent dielectric function of semiconductors10.1103/PhysRev.128.2093 ↗
55. Insight into the structural, electronic, mechanical and optical properties of inorganic lead bromide perovskite APbBr3(A=Li, Na, K, Rb, and Cs)10.1016/j.cocom.2020.e00478 ↗
56. Computational investigation of Ba2ZrTiO6 double perovskite for optoelectronic and thermoelectric applications10.1016/j.jssc.2022.123385 ↗
57. Cs2NaGaBr6: a new lead-free and direct band gap halide double perovskite10.1039/D0RA01764G ↗
58. Fundamental reflectivity and band structure of ZnTe, CdTe, and HgTe10.1103/PhysRev.131.98 ↗
59. Optical properties of solids
60. A bottom-up route to enhance thermoelectric figures of merit in graphene nanoribbons10.1038/srep01228 ↗
61. Nanomagnets boost thermoelectric output10.1038/549169a ↗
62. High thermoelectric performance in electron-doped AgBi3S5 with ultralow thermal conductivity10.1021/jacs.7b02399 ↗
63. Synthesis and characterization of Sr2TiMO6(M=Fe, Co) double perovskites for high temperature thermoelectric applications10.1080/10584587.2016.1190253 ↗
64. Thermoelectric properties of double-perovskite oxide Sr2−xMxFeMoO6(M=Ba, La)10.2109/jcersj2.116.1278 ↗
65. Lead free double perovsites halides X2AgTlCl6 (X=Rb, Cs) for solar cells and renewable energy applications10.1016/j.jssc.2021.121988 ↗