journal article·2024-04Open access

Impact of Zn alloying on structural, mechanical anisotropy, acoustic speeds, electronic, optical, and photocatalytic response of KMgF3 perovskite material

Asma Ayub, Hafiz Muhammad Naeem Ullah, Muhammad Rizwan, Abrar Ahamad Zafar, Zahid Usman, Uzma Hira

Abstract

This study explores the optoelectronic potential of advanced perovskite materials, with a primary focus on alloying KMgF 3 with 3d transition metals. Through this alloying process, the study employs density functional theory (DFT) with the GGA-PBE functional to tailor the atomic structure and various properties, including optoelectronic , mechanical, acoustic, anisotropic , and photocatalytic attributes. The introduction of Zn to KMgF 3 triggers a noticeable bandgap redshift and significant improvements in mechanical stability and photocatalytic performance. Increasing Zn content induces a transition in KMgF 3 's crystal structure to a pseudo-cubic tetragonal form, which remains mechanically stable for both pristine KMgF 3 and KMg (1-x) Zn x F 3 . Zn inclusion introduces versatile nonlinearity in terms of brittleness , stiffness, mechanical strength , and thermal behavior. This comprehensive analysis underscores anisotropy, mixed bonding, Debye fluctuations, and melting temperature variations. Notably, among the systems examined, KMg 0.25 Zn 0.75 F 3 stands out as an outstanding candidate for applications in photovoltaics and water splitting, thanks to its exceptional optical performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Acoustic Wave Resonator Technologies · Heusler alloys: electronic and magnetic properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Insights from density functional theory calculations on heteroatom P-doped ZnIn2S4 bilayer nanosheets with atomic-level charge steering for photocatalytic water splitting
2. Zhou · 2022
3. Impact of Li concentration in KMgF3: Eu, Yb fluoroperovskite on structure and luminescence properties10.1016/j.jallcom.2022.163810 ↗
4. Antiferromagnetic-piezoelectric crystals: bame4 (m= mn, fe, co and ni)10.1016/0038-1098(68)90576-0 ↗
5. A low-temperature structural phase transition in CsPbF310.1088/0953-8984/13/22/305 ↗
6. Experimental study of the electronic structure of KMg F 310.1103/PhysRevB.27.3878 ↗
7. Magnesium Fluoride (sellaite), MgF,(tetragonal)
8. High-pressure structural, elastic, and electronic properties of the scintillator host material K Mg F 310.1103/PhysRevB.76.014107 ↗
9. High-pressure behaviour of KMF3 perovskites10.1080/08957950802576464 ↗
10. Electronic energy-band structure of the KMg F 3 crystal10.1103/PhysRevB.25.3538 ↗
11. Solvothermal synthesis of complex fluorides KCoF3 and KNiF310.1246/cl.2002.538 ↗
12. Li, Z., Y. Wang, and D.-x. Liu, First-principles Study of the Correlation between Host Components and Properties of IAIIAF3 Cubic Perovskite Compounds.
13. Thickness effect on the structural, electronic and energetic properties of the cubic KMgF3 (0 0 1) surfaces: a first-principles study10.1016/j.apsusc.2019.144678 ↗
14. Study of hydrostatic pressure effect on structural, mechanical, electronic and optical properties of KMgF3, K 0. 5 Na 0. 5 MgF3 and NaMgF3 cubic fluoro-perovskites via ab initio calculations10.1142/S0217979216502301 ↗
15. Ab initio study of divalent 3d transition metal impurities in KMgF3 and BaLiF310.1143/JJAP.42.5082 ↗
16. Radiation-induced optically and thermally stimulated luminescence in RbCdF3 and RbMgF310.1016/j.cap.2007.10.078 ↗
17. Fiber-optic-coupled RbMgF3: Eu2+ for remote radiation dosimetry10.1016/j.radmeas.2011.07.033 ↗
18. Instant precipitation of KMgF3: Ni2+ nanocrystals with broad emission (1.3‐2.2 μm) for potential combustion gas sensors10.1111/jace.15551 ↗
19. Elastic properties of ABF3 (A: Ag, K and B: Mg, Zn) perovskites10.1063/1.5078907 ↗
20. Synthesis and photoluminescence properties of perovskite KMgF3: Eu nanocubes10.1557/jmr.2011.320 ↗
21. Preparation of KMgF3 and Eu-doped KMgF3 nanocrystals in water-in-oil microemulsions10.1016/j.materresbull.2006.06.004 ↗
22. Observation of photoluminescence and radioluminescence in Eu and Mn doped NaMgF3 nanoparticles10.1016/j.jlumin.2013.05.016 ↗
23. A theoretical study on the structural and energy spectral properties of Ce3+ ions doped in various fluoride compounds10.1021/jp306357d ↗
24. Cr3+-Doped fluorides and oxides: role of internal fields and limitations of the tanabe–sugano approach10.1021/jp207249w ↗
25. Cs2Pt: a platinide (‐ii) exhibiting complete charge separation10.1002/anie.200352314 ↗
26. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
27. General methods for geometry and wave function optimization10.1021/j100203a036 ↗
28. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
29. Finite basis set corrections to total energy pseudopotential calculations10.1088/0953-8984/2/19/007 ↗
30. First-principles calculation of stress10.1103/PhysRevLett.50.697 ↗
31. Structural, elastic, electronic, bonding, thermal, and optical properties of topological Weyl semimetal TaX (X= P, As): insights from ab-initio calculations
32. Effect of non-local hybrid functional on electronic band structure, manipulation of photocatalytic properties and optical response of Cu alloyed NaMgF3
33. Full potential calculation of structural, electronic and optical properties of KMgF310.1016/j.matchemphys.2004.11.019 ↗
34. First principles investigations of structural, electronic, elastic, and dielectric properties of KMgF310.1007/s10853-013-7581-5 ↗
35. Pressure induced physical variations in the lead free fluoropervoskites XYF3 (X= K, Rb, Ag; Y= Zn, Sr, Mg): optical materials
36. Effect of A-site cation radius on ordering of BX6 octahedra in (K, Na) MgF3 perovskite10.2138/am.2005.1693 ↗
37. Röntgenographische Untersuchung des Systems KF MgF210.1002/zaac.19562830127 ↗
38. Effects of Cr-and Mn-alloying on the band gap tuning, and optical and electronic properties of lead-free CsSnBr 3 perovskites for optoelectronic applications10.1039/D0RA09270C ↗
39. First-principles calculations on structural, elastic, electronic, optical and thermal properties of CsPbCl3 perovskite10.1016/j.physb.2011.02.040 ↗
40. The mechanical properties and elastic anisotropies of cubic Ni3Al from first principles calculations10.3390/cryst8080307 ↗
41. The elastic constants of crystals10.1016/S0081-1947(08)60553-6 ↗
42. Thermodynamic calculations for bcc sodium at high pressures10.1103/PhysRevB.30.3929 ↗
43. An ab-initio study on structural, elastic, electronic, bonding, thermal, and optical properties of topological Weyl semimetal TaX (X= P, As)10.1038/s41598-021-85074-z ↗
44. Deformation potentials in silicon. I. Uniaxial strain10.1103/PhysRev.128.2614 ↗
45. Mechanical and electronic properties of Ti2AlN and Ti4AlN3: a first-principles study10.1139/cjp-2013-0746 ↗
46. High-pressure structural, electronic and optical properties of KMgF3: a first-principles study10.1016/j.jallcom.2009.05.005 ↗
47. Elastic constants of cubic crystals10.1016/j.commatsci.2014.08.027 ↗
48. Atomistic simulation of structural and mechanical properties of the AMgF3 (A= K, Rb, and Cs) compounds under hydrostatic pressure10.1002/jcc.26117 ↗
49. Stainless steel optimization from quantum mechanical calculations10.1038/nmat790 ↗
50. Microscopic theory of hardness and design of novel superhard crystals10.1016/j.ijrmhm.2012.02.021 ↗
51. Effect of boron incorporation into the carbon-site in Nb2SC MAX phase: insights from DFT10.1016/j.jmrt.2021.02.031 ↗
52. Stability and elastic properties of Y–C binary compounds investigated by first principles calculations10.1016/j.jallcom.2013.11.005 ↗
53. Fast and simple calculus on tensors in the log-Euclidean framework
54. Schreiber · 1975
55. A simplified method for calculating the Debye temperature from elastic constants10.1016/0022-3697(63)90067-2 ↗
56. Ashby · 2009 · 10 · 143
57. Fletcher · 2012
58. The quasiparticle electronic energy bands of the cubic KMgF3 perovskite under pressure effect
59. First principles study for band engineering of KNbO 3 with 3d transition metal substitution
60. The effect of Sr and Sb co-doping on structural, morphological and thermoelectric properties of BaSnO3 perovskite material
61. Reflection spectra of perovskites from 8 eV to 60 eV10.1088/0022-3719/10/2/016 ↗
62. Study of structural and electronic properties of fluoride perovskite KMgF3 using FP-LAPW method
63. Linear optical properties of solids within the full-potential linearized augmented planewave
64. The quest for zero refractive index
65. First-principal investigations of electronic, structural, elastic and optical properties of the fluoroperovskite TlLF 3 (L= Ca, Cd) compounds for optoelectronic applications
66. Afaq · DFT study of SmXO3 (X= Al and Co) for elastic, mechanical and optical properties · 2018 · 32
67. Two-dimensional CdX/C2N (X= S, Se) heterostructures as potential photocatalysts for water splitting: a DFT study
68. Synthesis of perovskite KMgF3 with microemulsion for photocatalytic removal of various pollutants under visible light
69. Band structure design of semiconductors for enhanced photocatalytic activity: the case of TiO2
70. First principles scheme to evaluate band edge positions in potential transition metal oxide photocatalysts and photoelectrodes
71. Fatima · 2022
72. Active photocatalytic water splitting solar-to-hydrogen energy conversion: chalcogenide photocatalyst Ba2ZnSe3 under visible
73. Zhang · 2023
74. Electronic and optical properties of two-dimensional III2-VI3 materials with the FE-WZ′ structure