journal article·2023-11

Fabrication of carbon nanotube/ titanium dioxide nanomaterials-based hydrogen sensor using novel two-stage dielectrophoresis process

Abdullah Abdulhameed, Yaqub Mahnashi

Publisher page

Abstract

The porosity and large surface area of carbon nanotubes (CNTs) made them a candidate active material for gas sensing applications. However, the responsivity and sensitivity of CNTs toward hydrogen are lower than those of metal oxide semiconductor materials such as TiO 2. The addition of TiO 2 to CNTs is found to increase the sensitivity of the resulting composite material at the expense of increasing the resistance. This paper presents a new dielectrophoresis (DEP) process to fabricate nanoparticle-based hydrogen sensors at room temperature. The simple and low-cost process is based on tuning the AC signal frequency to deposit different nanoparticles in stages, forming a composite sensing layer across interdigitated electrodes (IDE). The sensing layers have been characterized using field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), and atomic force microscopy (AFM). Sensors fabricated with only CNTs showed low resistance and weak sensitivity of less than 2%. The sensitivity has increased to 3.42% when CNTs are deposited together with TiO 2 in a single stage. However, the sensor shows high resistance because TiO 2 particles interrupt the conduction paths of CNTs. A high sensitivity of 15.78% and a low resistance of ∼524 Ω have been achieved when CNTs are deposited individually in the first stage, and followed by depositing the TiO 2 in the second stage. This work provides a proof-of-concept that the two-stage DEP enhances the performance of the sensor in terms of sensitivity and resistance compared to single-stage DEP, which is highly desirable in fabricating composite and multi-layer sensing materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. High-concentration nafion-based hydrogen sensor for fuel-cell electric vehicles10.1016/j.ssi.2019.115134 ↗
2. Leakage detection by hydrogen/oxygen concentration ratio sensor in hydrogen-fueled reusable rocket
3. Review of hydrogen gas sensors for future hydrogen mobility infrastructure10.5757/ASCT.2022.31.4.79 ↗
4. A novel yttria-doped ZrO2 based conductometric sensor for hydrogen leak monitoring10.1016/j.ijhydene.2022.01.036 ↗
5. Recent advances and challenges of nanomaterials-based hydrogen sensors10.3390/mi12111429 ↗
6. Metal–polymer hybrid nanomaterials for plasmonic ultrafast hydrogen detection10.1038/s41563-019-0325-4 ↗
7. Oxide nanomaterials based on SnO 2 for semiconductor hydrogen sensors10.1155/2019/5190235 ↗
8. Characteristics of gas sensors based on Co-doped ZnO nanorod arrays10.1149/1945-7111/aba00d ↗
9. Hydrothermal synthesis and improved CHOH-sensing performance of ZnO nanorods with adsorbed Au NPs10.1109/TED.2021.3060354 ↗
10. A high-sensitivity hydrogen gas sensor based on carbon nanotubes fabricated on SiO2 substrate10.1080/20550324.2021.1977063 ↗
11. Hydrogen sensors based on flexible carbon nanotube-palladium composite sheets integrated with ripstop fabric10.1021/acsomega.9b03023 ↗
12. A high-sensitivity hydrogen gas sensor based on carbon nanotubes fabricated on glass substrate10.1007/s11664-018-6537-6 ↗
13. Transparent and flexible hydrogen sensor based on semiconducting single-wall carbon nanotube networks10.1016/j.carbon.2019.05.045 ↗
14. Carbon nanotubes: sensor properties. A review10.1016/j.moem.2017.02.002 ↗
15. A comparative study on the role of polyvinylpyrrolidone molecular weight on the functionalization of various carbon nanotubes and their composites10.3390/polym13152447 ↗
16. TiO2 as a gas sensor: the novel carbon structures and noble metals as new elements for enhancing sensitivity – a review10.1016/j.ceramint.2021.03.189 ↗
17. Pd-decorated CNT as sensitive material for applications in hydrogen isotopes sensing - application as gas sensor10.1016/j.ijhydene.2020.12.193 ↗
18. Carbon-doped ZnO nanotube-based highly effective hydrogen gas sensor: a first-principles study10.1016/j.ijhydene.2020.03.050 ↗
19. On the hydrogen sensing mechanism of Pt/TiO2/CNTs based devices10.1016/j.snb.2013.01.005 ↗
20. Synthesizing CNT-TiO2 nanocomposite and experimental pore-scale displacement of crude oil during nanofluid flooding10.1016/S1876-3804(23)60361-1 ↗
21. The characterisation of MWCNT-rGO-TiO2 nanocomposite as potential electrode material for hybrid supercapacitor10.20964/2022.05.10 ↗
22. Synthesis of Ag-doped TiO2/MWCNT for DSSC application
23. Synthesis of carbon nanotubes/titanium dioxide and study of its effect on the optical, dielectric, and mechanical properties of polyvinyl alcohol/sodium alginate for energy storage devices10.1002/er.7578 ↗
24. da Rosa Cunha · 2022 · 185
25. Self-powered electrochemical wide-band photodetectors using ZrO2@TiO2 nanorod arrays modified with single-walled carbon nanotubes
26. An electronic nose based on carbon nanotube -titanium dioxide hybrid nanostructures for detection and discrimination of volatile organic compounds10.1016/j.snb.2022.131418 ↗
27. Intrinsically flexible CNT-TiO2-interlaced film for NO sensing at room temperature10.1016/j.apsusc.2021.152172 ↗
28. Atomic layer deposition of titanium dioxide on multi-walled carbon nanotubes for ammonia gas sensing10.1016/j.surfcoat.2019.04.031 ↗
29. Room temperature toluene gas sensor based on TiO2 nanoparticles decorated 3D graphene-carbon nanotube nanostructures10.1016/j.snb.2018.09.095 ↗
30. Highly sensitive fiber-optic SPR sensor with surface coated TiO2/MWCNT composite film for hydrogen sulfide gas detection
31. Effects of MWCNTs/graphene nanoflakes/MXene addition to TiO2 thick film on hydrogen gas sensing10.1016/j.jallcom.2021.160671 ↗
32. Carbon nanotubes with adsorbed Au nanoparticles for sensing propanone gas10.1007/s00542-019-04573-2 ↗
33. CNT-based inkjet-printed RF gas sensor: modification of substrate properties during the fabrication process10.3390/s19081768 ↗
34. Response of TiO2/MWCNT/B2O3 gas sensor to hydrogen using different organic binder10.1016/j.mssp.2019.04.009 ↗
35. A review on Сhemiresistive gas sensors based on carbon nanotubes: device and technology transformation10.1016/j.sna.2018.09.061 ↗
36. Dielectrophoretic alignment of carbon nanotubes: theory, applications, and future10.1088/1361-6528/acc46c ↗
37. Sub-6 Nm palladium nanoparticles for faster, more sensitive H2 detection using carbon nanotube ropes10.1021/acssensors.6b00808 ↗
38. Self-aligned CH3NH3PbBr3 perovskite nanowires via dielectrophoresis for gas sensing applications
39. Simulation and experimental validation of the interplay between dielectrophoretic and electroosmotic behavior of conductive and insulator particles for nanofabrication and lab-on-chip applications10.1016/j.colsurfa.2023.131065 ↗
40. Electrical and sensing properties of single-walled carbon nanotubes network: effect of alignment and selective breakdown10.1002/elan.200900314 ↗
41. Effect of single wall carbon nanotube networks on gas sensor response and detection limit10.1016/j.snb.2016.09.095 ↗
42. Carbon nanotubes based transistors as gas sensors: state of the art and critical review10.1016/j.snb.2009.04.025 ↗
43. Enhance photocatalytic activity of TiO2 by carbon nanotubes
44. Mild nitric acid treatments to improve multi-walled carbon nanotubes dispersity and solubility in dielectrophoresis mediums10.1080/1536383X.2021.1908999 ↗
45. Airflow-assisted dielectrophoresis to reduce the resistance mismatch in carbon nanotube-based temperature sensors10.1039/D1RA08250G ↗
46. Assembly of long carbon nanotube bridges across transparent electrodes using novel thickness‐controlled dielectrophoresis10.1002/elps.202100268 ↗
47. The dielectric properties of the rutile form of TiO210.1063/1.1712721 ↗
48. On the permittivity of titanium dioxide10.1038/s41598-021-92021-5 ↗
49. The role of the AC signal on the dielectrophoretic assembly of carbon nanotubes across indium tin oxide electrodes10.1016/j.mee.2021.111597 ↗
50. Dielectric properties and characterisation of titanium dioxide obtained by different chemistry methods10.1155/2014/124814 ↗
51. The role of the electrode geometry on the dielectrophoretic assembly of multi-walled carbon nanotube bundles from aqueous solution10.1016/j.elstat.2022.103694 ↗
52. An optimized resistive CNT-based gas sensor with a novel configuration by top electrical contact10.1016/j.diamond.2019.01.020 ↗
53. Controlled fabrication of carbon nanotube NO2 gas sensor using dielectrophoretic impedance measurement10.1016/j.snb.2004.09.048 ↗
54. A compact wireless gas sensor using a carbon nanotube/PMMA thin film chemiresistor10.1088/0964-1726/13/5/010 ↗
55. Functionalized multiwalled carbon nanotubes based hydrogen gas sensor10.1016/j.sna.2013.07.018 ↗
56. Deposition of Pd nanoparticles on MWCNTs: green approach and application to hydrogen sensing10.1016/j.jallcom.2019.02.298 ↗
57. Highly sensitive hydrogen sensor based on a new suspended structure of cross-stacked multiwall carbon nanotube sheet10.1016/j.ijhydene.2019.01.055 ↗
58. MWCNT-based material as a gas sensor for H2S and NO2, synthesise and characterisation10.1016/j.inoche.2023.110741 ↗