journal article·2023-01

Sputtering Al2O3 as an effective interface layer to improve open-circuit voltage and device performance of Sb2Se3 thin-film solar cells

Wei Zi, Fangling Mu, Xiaoman Lu, Zhen Liu, Xuerui Pang, Zhen Yu, Yanlei Li, Zhiqiang Zhao, Bao Lei, Nian Cheng, Zhenyu Xiao

Publisher page

Abstract

Sb 2Se 3 as a promising photovoltaic absorber material is attracting increasing attention. However, high open-circuit voltage ( V OC) loss, especially for superstrate structured Sb 2Se 3 solar cells, is one of the main bottlenecks for improving device efficiency. Here, sputtering aluminum oxide (Al 2O 3 ) as an interface layer between CdS and Sb 2Se 3 was applied in superstrate structured Sb 2Se 3 solar cells. We proved that the sputtered Al 2O 3 layer is not fully continuous on the rough CdS film even its thickness has reached 8.8 nm. Then we systematically investigated the influence of the Al 2O 3 layer on Sb 2Se 3 material properties and device performances. It is found that the Al 2O 3 layer can not only effectively inhibit [hk0]-oriented crystal growth and promote [hk1] growth orientation of Sb 2Se 3 films but also obviously weaken the disordered growth of prominent petal-like shape Sb 2Se 3 grains and reduce the surface roughness. Further, the Al 2O 3 layer can also availably passivate interfacial defects at the CdS/Sb 2Se 3 interface. Consequently, the average power conversion efficiency (PCE) of Sb 2Se 3 solar cells with an optimal Al 2O 3 layer thickness is 17.86% higher than that without the Al 2O 3 layer. Noteworthily, the V OC of Sb 2Se 3 solar cells is boosted to 0.462 V, which is the highest value in superstrate structured Sb 2Se 3 solar cells with absorber prepared by conventional physical methods. Finally, a champion efficiency of 6.25% has been achieved in a low-cost Sb 2Se 3 thin-film solar cell with FTO/CdS/Al 2O 3/Sb 2Se 3/Carbon device configuration.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Cd-free Cu (In, Ga)(Se, S) 2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
2. Solar cell efficiency tables (Version 58)10.1002/pip.3444 ↗
3. GeSe thin-film solar cells fabricated by self-regulated rapid thermal sublimation10.1021/jacs.6b11705 ↗
4. Post-annealing treatment of a-GeSe thin films for photovoltaic application10.1016/j.solener.2020.02.086 ↗
5. Selenization of Sb2Se3 absorber layer: an efficient step to improve device performance of CdS/Sb2Se3 solar cells10.1063/1.4894170 ↗
6. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
7. Solution-phase synthesis of SnSe nanocrystals for use in solar cells10.1021/ja100249m ↗
8. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
9. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
10. Fabricating over 7%-efficient Sb2 (S, Se) 3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source10.1016/j.jpowsour.2021.229737 ↗
11. Antimony induced crystal growth for large-grained Cu2SnS3 thin films for photovoltaics10.1016/j.jpowsour.2019.04.013 ↗
12. Fabrication of Cu2SnS3 thin film solar cells using pulsed laser deposition technique10.1016/j.solmat.2015.02.031 ↗
13. FeS2 nanocrystal ink as a catalytic electrode for dye-sensitized solar cells10.1002/ange.201300401 ↗
14. Observation of an internal p–n junction in pyrite FeS2 single crystals: potential origin of the low open circuit voltage in pyrite solar cells10.1021/acsmaterialslett.0c00207 ↗
15. Optical properties of amorphous and polycrystalline Sb2Se3 thin films prepared by thermal evaporation10.1063/1.4927741 ↗
16. Antimony selenide absorber thin films in all-chemically deposited solar cells10.1149/1.3089358 ↗
17. Electrodeposition of antimony selenide thin films and application in semiconductor sensitized solar cells10.1021/am405416a ↗
18. Interfacial engineering for high efficiency solution processed Sb2Se3 solar cells10.1016/j.solmat.2018.09.020 ↗
19. Solution-Processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
20. Thermal evaporation and characterization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
21. Improving the performance of Sb2Se3thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
22. Rapid thermal process to fabricate Sb 2 Se 3 thin film for solar cell application10.1016/j.solener.2016.08.020 ↗
23. Efficiency improvement of Sb2Se3 solar cells via grain boundary inversion10.1021/acsenergylett.8b01456 ↗
24. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV10.1016/j.nanoen.2020.104806 ↗
25. Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film10.1016/j.nanoen.2019.103929 ↗
26. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
27. Remarkable Sb2Se3 solar cell with a carbon electrode by tailoring film growth during the VTD process10.1021/acsaem.1c03055 ↗
28. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells
29. Stable and efficient CdS/Sb2Se3 solar cells prepared by scalable close space sublimation10.1016/j.nanoen.2018.04.044 ↗
30. Orientation engineering in low-dimensional crystal-structural materials via seed screening10.1002/adma.201903914 ↗
31. Heterojunction annealing enabling record open-circuit voltage in antimony triselenide solar cells10.1002/adma.202109078 ↗
32. Open-circuit voltage loss of antimony chalcogenide solar cells: status, origin, and possible solutions10.1021/acsenergylett.0c00940 ↗
33. Conduction band energy-level engineering for improving open-circuit voltage in antimony selenide nanorod array solar cells10.1002/advs.202100868 ↗
34. Current enhancement via a TiO2 window layer for CSS Sb2Se3 solar cells: performance limits and high V OC10.1109/JPHOTOV.2018.2885836 ↗
35. Interface engineering via sputtered oxygenated CdS: O window layer for highly efficient Sb2Se3 thin-film solar cells with efficiency above 7%10.1002/solr.201900225 ↗
36. Improved open-circuit voltage of Sb2Se3 ThinFilm solar cells via inter-facial sulfur diffusion-induced gradient bandgap engineering10.1002/solr.202100419 ↗
37. Spark plasma sintering of Sb2Se3 sputtering target towards highly efficient thin film solar cells10.1016/j.solmat.2020.110530 ↗
38. 6.5% certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
39. 7.5% n–i–p Sb2Se3 solar cells with CuSCN as a hole-transport layer10.1039/C9TA01773A ↗
40. Interfaces, back contact interfacial modification in highly-efficient all-inorganic planar nip Sb2Se3 solar cells10.1021/acsami.0c10629 ↗
41. Efficient and stable planar n–i–p Sb2Se3 solar cells enabled by oriented 1D trigonal selenium structures10.1002/advs.202001013 ↗
42. Stable and efficient Sb2Se3 solar cells with solution-processed NiOx hole-transport layer10.1016/j.solener.2021.02.063 ↗
43. Approach for Al2O3 rear surface passivation of industrial p-type Si PERC above 19%10.1002/pip.2196 ↗
44. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
45. Surface passivation of Cu (In, Ga) Se2 using atomic layer deposited Al2O310.1063/1.3675849 ↗
46. The role of hydrogen from ALD-Al2O3 in kesterite Cu2ZnSnS4 solar cells: grain surface passivation10.1002/aenm.201701940 ↗
47. Chemical dopant engineering in hole transport layers for efficient perovskite solar cells: insight into the interfacial recombination10.1021/acsnano.8b06062 ↗
48. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
49. Numerical investigation of interface passivation strategies for Sb2Se3/CdS solar cells10.1002/solr.202100911 ↗
50. Characterization of chemical bath deposited CdS thin films at different deposition temperature10.1016/j.jallcom.2009.12.088 ↗
51. Application of mesoporous SiO2 layer as an insulating layer in high performance hole transport material free CH3NH3PbI3 perovskite solar cells10.1016/j.jpowsour.2016.04.124 ↗
52. Sb 2 Se 3 thin film solar cells in substrate configuration and the back contact selenization10.1016/j.solmat.2016.11.033 ↗
53. Buried homojunction in CdS/Sb2Se3 thin film photovoltaics generated by interfacial diffusion10.1063/1.4991539 ↗