journal article·2021-12

Two-step chemical bath deposition enhanced mobility of PbS thin films

U. Chalapathi, Si-Hyun Park, Won Jun Choi

Publisher page

Abstract

Abstract A two-step chemical bath deposition (CBD) method that involves the deposition of films at two different bath temperatures is developed to enhance the grain growth and hole mobility of lead sulfide (PbS) thin films. The films deposited at three different conditions; first at 60 °C for 2 h, second at 30 °C for 1 h and at 60 °C for the subsequent 1 h, and finally at 60 °C for 1 h and at 30 °C for the subsequent hour. The deposition of PbS at only 60 °C for 2 h leads to the formation of cubic crystals with different sizes and hole mobility of 43.8 cm2V−1s−1. The deposition at a low temperature of 30 °C for the initial 1 h followed by the deposition at a high temperature of 60 °C for the subsequent hour increases the grain size and hole mobility to 62.2 cm2V−1s−1. However, the deposition of PbS at a high temperature of 60 °C for 1 h followed by the deposition at a low temperature of 30 °C for the subsequent hour decreases the grain size and hole mobility to 32.1 cm2V−1s−1. The PbS film deposited at low temperature in the first step acts as a seed layer for the growth of large-grained PbS in the second step. Thus, the two-step CBD method enhances the grain growth and hole mobility of PbS films. Hence, the two-step CBD method is very much useful for the growth of PbS for its applications in optoelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Room temperature photocurrent response of PbS/InP heterojunction10.1063/1.3271526 ↗
2. Hybrid solar cells using PbS nanoparticles10.1016/j.solmat.2006.10.016 ↗
3. High cw output power in stripe-geometry PbS diode lasers10.1063/1.1663409 ↗
4. Research on gas-sensing properties of lead sulfide-based sensor for detection of NO2 and NH3 at room temperature10.1016/j.snb.2009.03.075 ↗
5. Precipitation of PbS from solutions containing EDTA10.1016/0022-0248(84)90223-9 ↗
6. Preparation and characterization of tin sulphide thin films by a spray pyrolysis technique10.1016/j.tsf.2004.11.035 ↗
7. Electrodeposition of lead sulphide in acidic medium10.1016/S0022-0728(97)00124-1 ↗
8. Characterization of vacuum evaporated PbS thin films10.1016/S0921-4526(02)01272-3 ↗
9. Spectrally selective PbS films produced by ion beam sputtering10.1016/0040-6090(82)90357-1 ↗
10. Six complexing agents and their effects on optical, structural, morphological and photoluminescence properties of lead sulphide thin films prepared by chemical route10.1016/j.jlumin.2018.05.004 ↗
11. Chemically grown highly crystalline PbS thin films with ethylenediamine tetraacetic acid complexing agent10.1016/j.mssp.2021.106022 ↗
12. Sulfide precursor concentration and lead source effect on PbS thin films properties10.1016/j.jallcom.2016.01.088 ↗
13. Optical properties of PbS thin films chemically deposited at different temperatures10.1016/S0040-6090(03)00908-8 ↗
14. The role of solution composition in chemical bath deposition of epitaxial thin films of PbS on GaAs (1 0 0)10.1016/j.jcrysgro.2007.07.046 ↗
15. Chemically deposited nanocrystalline lead sulfide thin films with tunable properties for use in photovoltaics10.1016/j.electacta.2014.11.021 ↗
16. Highly crystalline p-PbS thin films with tunable optical and hole transport parameters by chemical bath deposition10.1016/j.actamat.2017.03.062 ↗
17. Photocurrent spectra from PbS photovoltaic infrared detectors using silver nanowires as plasmonic nano antenna electrodes10.1088/1361-6528/aaf194 ↗
18. Photocurrent spectra for above and below bandgap energies from photovoltaic PbS infrared detectors with graphene transparent electrodes10.1016/j.cap.2020.01.006 ↗
19. Effective two-step chemical deposition for homogeneous lead sulfide thin films on a flexible polymer substrate10.1016/j.tsf.2019.04.011 ↗
20. Influence of Sb3+ ions on photoconductive properties of chemically deposited PbS films10.1016/S0921-5107(00)00578-X ↗
21. Bi influence on growth and physical properties of chemical deposited PbS films10.1016/S0040-6090(03)00449-8 ↗
22. Chemically synthesized PbS nano particulate thin films for a rapid NO2 gas sensor10.1515/msp-2016-0001 ↗