Two-stage-processed AgSbS2 films for thin-film solar cells
Source abstract
Abstract
AgSbS 2 has shown promise as an earth-abundant, sustainable light-harvesting material for thin-film solar cells owing to its suitable optoelectronic properties and high stability. Here, we report the fabrication of AgSbS 2 thin films using a two-stage process (sequential evaporation of Sb/Ag layers and sulfurization at 300–400 °C for 30 min) and their characterization. X-ray diffractometry revealed the formation of Ag 3SbS 3 and Sb 2S 3 phases, single-phase AgSbS 2, and slight decomposition of AgSbS 2 and the emergence of monoclinic AgSbS 2 at sulfurization temperatures of 300, 350, and 400 °C, respectively. The AgSbS 2 films have a cubic crystal structure with a lattice parameter (a) of 0.565 nm. X-ray photoelectron spectroscopy confirmed that the valence states of Ag, Sb, and S were +1, +3, and -2, respectively. Microstructural analysis of the film prepared at 350 °C revealed highly crystalline, large-grains with an average grain size of 5 μ m . Optical absorption studied suggested that the AgSbS 2 film prepared at 350 °C exhibited a direct bandgap of 1.61 eV. Hall measurements revealed an electrical resistivity of 1.52 × 10 4 Ω cm, hole mobility of 84.5 cm 2V −1s −1, and a carrier concentration of 7.95 × 10 12 cm −3 for the AgSbS 2 film prepared at 350 °C. Finally, AgSbS 2 solar cells with glass/Mo/AgSbS 2/CdS/indium-tin-oxide/Ag configuration were fabricated (optimal device parameters: efficiency, 1.1%; open-circuit voltage, 519.6 mV; short-circuit current density, 6.63 mA/cm 2; and fill factor, 31.0%). The device processing conditions must be optimized to further improve the efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Solar cell efficiency tables (version 60)10.1002/pip.3595 ↗
2. Development of perovskite solar cells with >25% conversion efficiency10.1016/j.joule.2021.04.008 ↗
3. Solution processed AgSbS2 film for efficient planar heterojunction solar cells10.1063/5.0064802 ↗
4. Amorphous chalcogenide AgSbS2 films prepared by pulsed laser deposition10.1007/s00339-004-2847-z ↗
5. AgSbS2 semiconductor-sensitized solar cells10.1016/j.elecom.2012.10.003 ↗
6. Photoconductive thin films of AgSbS2 with cubic crystalline structure in solar cells10.1002/pssa.201532496 ↗
7. AgSbS2 and Ag3SbS3 absorber materials for photovoltaic applications10.1016/j.matchemphys.2016.06.077 ↗
8. AgSbS2 thin film fabricated by in-situ gas-solid reaction and employed in solar cells as a light absorber10.1016/j.matlet.2018.08.081 ↗
9. Monoclinic AgSbS2 thin films for photovoltaic applications: Computation, growth and characterization approaches10.1016/j.mssp.2021.106074 ↗
10. Thin-film solar cells using a selenized silver antimony sulfide absorber prepared by spray pyrolysis deposition
11. The pyrolysis preparation of the compact and full-coverage AgSbS2 thin films and the photovoltaic performance of the corresponding solar cells10.1016/j.jmst.2021.04.070 ↗
12. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
13. Cu2Sn1−xGexS3 solar cells fabricated with a graded bandgap structure10.7567/APEX.9.072301 ↗
14. Evolution of large-grained CuSbS2 thin films by rapid sulfurization of evaporated Cu–Sb precursor stacks for photovoltaics application
15. D. Cullity · 1956 · 261
16. Glancing incidence X-ray diffraction of polycrystalline thin films
17. Cu2SnS3 and Cu4SnS4 thin films via chemical deposition for photovoltaic application10.1149/1.3384660 ↗
18. Fabrication of Cu2SnS3 films by annealing chemically deposited SnS–CuS precursors in a graphite box10.1007/s10854-017-8053-5 ↗
19. AgSbS2−xSex thin films: Structure, composition, morphology and photodetection properties
20. CuSbS2 thin films by rapid thermal processing of Sb2S3-Cu stack layers for photovoltaic application10.1016/j.solmat.2017.02.005 ↗
21. Ag3SbS3 thin films formed by annealing hydrothermally synthesized Ag3SbS3 nanoparticles10.1016/j.matlet.2016.04.165 ↗
22. Ag3SbS3 liquid-junction semiconductor-sensitized solar cells10.1149/2.1121606jes ↗