Antireflection effect of high haze FTO for improving short circuit current density of perovskite solar cells
Source abstract
Abstract
The optical properties of fluorine-doped tin oxide (FTO) coated glass substrates will limit the short circuit current density ( J sc ), thus the power conversion efficiency (PCE) of perovskite solar cells (PSCs). This work compares the transmittance, reflectance, haze, and surface roughness of different FTO glass substrates. Then the performance of the PSCs, which were fabricated on these substrates, is discussed. The analysis indicates that higher haze FTO glass substrates with higher surface roughness are effective for the reduction of light reflection from NiO x-deposited FTO substrates/perovskite interfaces, leading to higher J sc and thus the higher PCE of the PSCs. The antireflection effect is attributed to light absorption by the perovskite layer via multiple reflections due to the very rough FTO surface texture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
2. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide10.1126/science.aay7044 ↗
3. Modulation of defects and interfaces through alkylammonium interlayer for efficient inverted perovskite solar cells10.1016/j.joule.2020.04.001 ↗
4. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
5. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
6. Lead free efficient perovskite solar cell device Optimization and defect study using Mg doped CuCrO2 as HTL and WO3 as ETL10.1016/j.solener.2022.07.013 ↗
7. A comprehensive study on RbGeI3 based inorganic perovskite solar cell using green synthesized CuCrO2 as hole conductor10.1016/j.jphotochem.2023.114623 ↗
8. Perovskite solar cells with near 100% internal quantum efficiency based on large single crystalline grains and vertical bulk heterojunctions10.1021/jacs.5b03144 ↗
9. Fluorine tin oxide as an alternate to indium tin oxide in polymer LEDs10.1002/(SICI)1521-4095(199808)10:11<859::AID-ADMA859>3.0.CO;2-1 ↗
10. Annealing effect on (FAPbI3)1−x(MAPbBr3)x perovskite films in inverted-type perovskite solar cells10.3390/ma9090747 ↗
11. Inverted planar solar cells based on perovskite/graphene oxide hybrid composites10.1039/C7TA04575A ↗
12. Understanding the film formation kinetics of sequential deposited narrow-bandgap Pb–Sn hybrid perovskite films10.1002/aenm.202000566 ↗
13. Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells10.1126/science.abb8985 ↗
14. Superior stability and efficiency over 20% perovskite solar cells achieved by a novel molecularly engineered rutin–AgNPs/thiophene copolymer10.1002/advs.201800568 ↗
15. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
16. High efficiency perovskite solar cells exceeding 22% via a photo-assisted two-step sequential deposition10.1002/adfm.202006718 ↗
17. Synergistic effect of fluorinated passivator and hole transport dopant enables stable perovskite solar cells with an efficiency near 2410.1021/jacs.0c12802 ↗
18. Study of open circuit voltage loss mechanism in perovskite solar cells10.35848/1347-4065/abe5c1 ↗
19. Two-step annealing of NiOx enhances the NiOx–perovskite interface for high-performance ambient-stable p–i–n perovskite solar cells10.1016/j.apsusc.2019.144478 ↗
20. Influence of anti-solvents on CH3NH3PbI3 films surface morphology for fabricating efficient and stable inverted planar perovskite solar cells10.1016/j.tsf.2018.08.015 ↗
21. Electro-active nanofibers of a tetrathiafulvalene derivative with amide hydrogen bonds as a dopant-free hole transport material for perovskite solar cells10.1016/j.solener.2019.10.078 ↗
22. Light scattering effects of highly textured TRABSPARENT COMDUCTIVE oxides films
23. Effect of textured glass substrates coated with LPCVD-deposited SnO2:F on amorphous silicon solar cells10.1016/j.solmat.2015.04.003 ↗
24. Anti-reflecting and photonic nanostructures10.1016/j.mser.2010.04.001 ↗
25. Optical characterizations and modelling of semitransparent perovskite solar cells for tandem applications
26. Postdeposition annealing of NiOx thin films: a transition from n-type to p-type conductivity for short wave length optoelectronic devices10.1557/jmr.2012.443 ↗
27. The progress of interface design in perovskite-based solar cells10.1002/aenm.201600460 ↗
28. Ray tracing analysis of the inverted pyramid texturing geometry for high efficiency silicon solar cells10.1016/0927-0248(93)90090-P ↗
29. Perfect blackbody sheets from nano-precision microtextured elastomers for light and thermal radiation management10.1039/C8TC06593D ↗
30. High-efficiency p–i–n superstrate amorphous Si solar cells on SiOx periodic arrays of three-dimensional microstructure prepared by soft imprinting
31. High efficiency and stability of inverted perovskite solar cells using phenethyl ammonium iodide-modified interface of NiOx and perovskite layers10.1021/acsami.9b18217 ↗
32. Reference of Temperature and Time during tempering process for non-stoichiometric FTO films
33. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
34. Breakthroughs in NiOx-HTMs towards stable, low-cost and efficient perovskite solar cells10.1016/j.nanoen.2018.06.082 ↗
35. High-performance planar perovskite solar cells using low temperature, solution–combustion-based nickel oxide hole transporting layer with efficiency exceeding 2010.1002/aenm.201703432 ↗
36. Cobalt-doped nickel oxide nanoparticles as efficient hole transport materials for low-temperature processed perovskite solar cells10.1016/j.solener.2019.01.097 ↗
37. Interface modification of sputtered NiOx as the hole-transporting layer for efficient inverted planar perovskite solar cells10.1039/C9TC05759E ↗
38. Air-stable perovskite photovoltaic cells with low temperature deposited NiOx as an efficient hole-transporting material10.1364/OME.391321 ↗
39. Conformal quantum dot–SnO2 layers as electron transporters for efficient perovskite solar cells10.1126/science.abh1885 ↗
40. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗