journal article·2022-03

Defect reduction in SiC epilayers by different substrate cleaning methods

D. Baierhofer, B. Thomas, F. Staiger, B. Marchetti, C. Förster, T. Erlbacher

Publisher page

Abstract

Low defect epitaxial layers are of highest importance for the fabrication of high power SiC devices using large chip area. To minimize the impact of defects and particles on the substrates, the influence of different automated cleaning procedures on defects of epitaxial layers subsequently grown on 150 mm 4H–SiC substrates was investigated. Therefore, 12 μm thick n-type epitaxial layers were grown on commercially available 150 mm 4H–SiC Si-face substrates with lowest micropipe density using a warm-wall chemical vapor deposition reactor. The defects of all samples were characterized utilizing surface microscopy as well as ultra-violet photoluminescence techniques. With these methods, a qualitative, as well as quantitative, characterization of surface defects and crystallographic defects from the as-received substrate to the finished epitaxy was carried out and is discussed. Yield prediction maps for high voltage metal-oxide-semiconductor field-effect-transistors were generated and the reduction of critical defects, which results in a predicted die yield increase, as well as an outlook on future investigations, is discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Material science and device physics in SiC technology for high-voltage power devices10.7567/JJAP.54.040103 ↗
2. General properties of bulk SiC
3. SiC material properties
4. Current SiC power device development, material defect measurements and characterization at bosch
5. Bulk and epitaxial growth of silicon carbide10.1016/j.pcrysgrow.2016.04.018 ↗
6. Understanding the microstructures of triangular defects in 4H-SiC homoepitaxial10.1016/j.jcrysgro.2017.10.015 ↗
7. Study of triangular defects and inverted pyramids in 4H-SiC 4° off-cut (0001) Si face epilayers10.1016/j.jcrysgro.2008.07.102 ↗
8. Application of UV photoluminescence imaging spectroscopy for stacking faults identification on thick, lightly n-type doped, 4°-off 4H-SiC epilayers10.1063/1.4915128 ↗
9. Nucleation of in-grown stacking faults and dislocation half-loops in 4H-SiC epitaxy10.1063/1.4821242 ↗
10. Characterization of the carrot defect in 4H-SiC epitaxial layers10.1016/j.jcrysgro.2010.02.037 ↗
11. Trapezoid defect in 4H–SiC epilayers10.1016/j.jcrysgro.2011.10.009 ↗
12. Structural and electronic characterization of (2,33) bar-shaped stacking fault in 4H-SiC epitaxial layers10.1063/1.3551542 ↗
13. Kallinger · 2010 · 645–648 · 299
14. Surface defects and accompanying imperfections in 4H–SiC: optical, structural and electrical characterization10.1016/j.actamat.2011.09.010 ↗
15. SiC power device design and fabrication
16. Corporation · 2015
17. Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology
18. Electrical and structural investigation of triangular defects in 4H-SiC junction barrier Schottky devices10.1063/1.3103308 ↗