Short-chain ligands capped CuInSe2 quantum dots as hole transport material for inverted perovskite solar cells
Source abstract
Abstract
Abstract In this paper, oleylamine capped CuInSe2 (OAm-CISe) quantum dots (QDs) were synthesized with a modified hot injection method. The organic long-chain ligands attached on the surface of quantum dots have insulating properties, which affects the charge transport between the quantum dots. Thus the long-chain ligand on OAm-CISe surface was replaced by a short-chain ligand of 3-mercaptopropionic acid (MPA) by phase transfer strategy. The MPA capped CISe (MPA-CISe) was applied as hole transport material to fabricated inverted perovskite solar cells (PSCs). The power conversion efficiency (PCE) of PSCs based on MPA-CISe increased to 8.59% from 7.18% for the PSCs based on OAm-CISe (7.18%). The experimental results indicate that the PCE increase could be due to higher light transmission rate and conductivity of MPA-CISe film than the OAm-CISe film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Red, green, and blue quantum dot leds with solution processable ZnO nanocrystal electron injection layers10.1039/b800028j ↗
2. Charge-ordered ferromagnetic phase in La0.5Ca0.5MnO310.1038/nature01299 ↗
3. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
4. Environmentally friendly Cu2ZnSnS4-pased photocathode modified with a ZnS protection layer for efficient solar water splitting10.1016/j.jcis.2018.10.032 ↗
5. Surface derivatization and isolation of semiconductor cluster molecules10.1021/ja00218a008 ↗
6. Semiconductor crystallites: a class of large molecules10.1021/ar00174a003 ↗
7. Colloidal nanocrystal synthesis and the organic-inorganic interface10.1038/nature04165 ↗
8. Zn-Cu-In-Se quantum dot solar cells with a certified power conversion efficiency of 11.6%10.1021/jacs.6b00615 ↗
9. Broadband hybrid organic/CuInSe2 quantum dot photodetectors10.1039/C8TC00288F ↗
10. Scalable noninjection phosphine-free synthesis and optical properties of tetragonal-phase CuInSe2 quantum dots10.1039/C6NR02505F ↗
11. An inorganic hole-transport material of CuInSe2 for stable and efficient perovskite solar cells10.1016/j.orgel.2019.01.029 ↗
12. Effective ligand passivation of Cu2O nanoparticles through solid-state treatment with mercaptopropionic acid10.1021/ja502221r ↗
13. A general and facile approach to disperse hydrophobic nanocrystals in water with enhanced long-term stability10.1039/C7TC00586E ↗
14. Synthesis and characterization of highly luminescent CdSe-core CdS/Zn0.5Cd0.5S/ZnS multishell nanocrystals10.1021/ja042939g ↗
15. Roles of the methyl and methylene groups of mercapto acids in the photoluminescence efficiency and carrier trapping dynamics of CdTe QDs10.1039/C6CP07211A ↗
16. Additive engineering for efficient and stable perovskite solar cells
17. Effective ligand engineering of the Cu2ZnSnS4 nanocrystal surface for increasing hole transport efficiency in perovskite solar cells10.1002/adfm.201603441 ↗
18. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
19. High open-circuit voltage of ternary Cu2GeS3 thin film solar cells from combustion synthesized Cu-Ge alloy10.1016/j.solmat.2016.11.001 ↗
20. A general and reversible phase transfer strategy enabling nucleotides modified high-quality water-soluble nanocrystals10.1039/c2cc30444a ↗
21. Small GSH-capped CuInS2 quantum dots: MPA-assisted aqueous phase transfer and bioimaging applications10.1021/acsami.5b05503 ↗
22. Low-temperature solution-processed CuCrO2 hole-transporting layer for efficient and photostable perovskite solar cells
23. Inverted planar perovskite solar cells with a high fill factor and negligible hysteresis by the dual effect of NaCl-doped PEDOT:PSS10.1021/acsami.7b14592 ↗
24. Effective visible light-activated B-doped and B,N-codoped TiO2 photocatalysts10.1021/ja0749237 ↗
25. Enhanced electronic transport in Fe3+-doped TiO2 for high efficiency perovskite solar cells10.1039/C7TC03845C ↗
26. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
27. Highly efficient and stable planar perovskite solar cells with reduced graphene oxide nanosheets as electrode interlayer10.1016/j.nanoen.2014.12.022 ↗
28. Well-defined nanostructured, single-crystalline TiO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsnano.6b01575 ↗
29. The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells10.1039/C3EE43161D ↗
30. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
31. Compact layer free perovskite solar cells with 13.5% efficiency10.1021/ja508758k ↗
32. Enhanced photovoltaic performance of perovskite solar cells based on Er-Yb co-doped TiO2 nanorod arrays10.1016/j.electacta.2017.06.032 ↗
33. Effect of solvents on the growth of TiO2 nanorods and Their perovskite solar cells10.1039/C5TA03765D ↗
34. Enhanced performance of perovskite solar cells by using ultrathin BaTiO3 interface modification10.1021/acsami.8b16358 ↗