journal article·2020-08

Room-temperature Sputtered NiOx for hysteresis-free and stable inverted Cs-FA mixed-cation perovskite solar cells

Mengying Yan, Tianxing Xiang, Xinxin Yu, Junyan Xiao, Wei Li, Zhiliang Ku, Fuzhi Huang, Jie Zhong, Yong Peng, Yi-bing Cheng

Publisher page

Abstract

Abstract In this research, a room-temperature sputtering technology for fabricating high performance NiOx film was developed, which was applicable for inverted cesium (Cs)-formamidinium (FA) mixed-cation perovskite solar cells (PSCs). The Ni3+/Ni2+ ratio in sputtered NiOx film was effectively adjusted by controlling Ar pressure while sputtering. NiOx films with appropriate Ni3+/Ni2+ ratio exhibit uniform surface morphology, high transmittance, and better energy level match with the perovskite layer. By using this sputtered NiOx film as hole transporting layer, short-circuit current density (Jsc), open-circuit voltage (Voc), fill factor (FF) and power conversion efficiency (PCE) of a champion inverted PSC were 19.25 mA/cm2, 1.05 V, 0.80 and 16.23%, respectively. Also, these devices remained 90.6% of their initial PCE after light soaking at a surrounding temperature of 50 °C for more than 600 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
3. Understanding the physical properties of hybrid perovskites for photovoltaic applications10.1038/natrevmats.2017.42 ↗
4. An effective surface modification strategy with high reproducibility for simultaneously improving efficiency and stability of inverted MA-free perovskite solar cells10.1039/C9TA07238A ↗
5. Rapid aqueous spray fabrication of robust NiOx : a simple and scalable platform for efficient perovskite solar cells10.1002/aenm.201803600 ↗
6. Design of an inorganic mesoporous hole-transporting layer for highly efficient and stable inverted perovskite solar cells10.1002/adma.201805660 ↗
7. Sequential introduction of cations deriving large-grain Csx FA1-x PbI3 thin film for planar hybrid solar cells: insight into phase-segregation and thermal-healing behavior10.1002/smll.201603225 ↗
8. Importance of oxygen partial pressure in annealing NiO film for high efficiency inverted perovskite solar cells10.1002/solr.201800339 ↗
9. Efficient CH3NH3PbI3 perovskite solar cells employing nanostructured p-type NiO electrode formed by a pulsed laser deposition10.1002/adma.201500523 ↗
10. Understanding the doping effect on NiO: toward high-performance inverted perovskite solar cells
11. Plasma-assisted atomic layer deposition of nickel oxide as hole transport layer for hybrid perovskite solar cells10.1039/C9TC04282B ↗
12. Room-temperature and solution-processable Cu-doped nickel oxide nanoparticles for efficient hole-transport layers of flexible large-area perovskite solar cells10.1021/acsami.7b13621 ↗
13. Fullerene-anchored Core-shell ZnO nanoparticles for efficient and stable dual-sensitized perovskite solar cells10.1016/j.joule.2018.10.018 ↗
14. Impact of surface dipole in NiOx on the crystallization and photovoltaic performance of organometal halide perovskite solar cells10.1016/j.nanoen.2019.05.004 ↗
15. Room-temperature-sputtered nanocrystalline nickel oxide as hole transport layer for p–i–n perovskite solar cells10.1021/acsaem.8b01263 ↗
16. High performance perovskite sub-module with sputtered SnO2 electron transport layer10.1016/j.solener.2019.03.026 ↗
17. Minimizing the energy loss of perovskite solar cells with Cu+ doped NiOx processed at room temperature10.1016/j.solmat.2018.01.025 ↗
18. Thermal oxidation of sputtered nickel nano-film as hole transport layer for high performance perovskite solar cells10.1007/s10854-019-02345-2 ↗
19. NiOx hole transport layer for perovskite solar cells with improved stability and reproducibility10.1021/acsomega.7b00538 ↗
20. Low-temperature sputtered nickel oxide compact thin film as effective electron blocking layer for mesoscopic NiO/CH3NH3PbI3 perovskite heterojunction solar cells10.1021/am503610u ↗
21. Modulation of Ni3+ and crystallization of dopant-free NiOx hole transporting layer for efficient p-i-n perovskite solar cells10.1016/j.electacta.2019.06.168 ↗
22. Overcoming the limitations of sputtered nickel oxide for high-efficiency and large-area perovskite solar cells10.1002/advs.201700463 ↗
23. CH3NH3PbI3-Based planar solar cells with magnetron-sputtered nickel oxide10.1021/am507108u ↗
24. High-performance planar perovskite solar cells using low temperature, solution-combustion-based nickel oxide hole transporting layer with efficiency exceeding 20%10.1002/aenm.201703432 ↗
25. Large-area perovskite solar cells with Cs(x)FA(1-x)PbI(3-y)Br(y) thin films deposited by a vapor-solid reaction method10.1039/C8TA06557H ↗
26. Controlling orientation diversity of mixed ion perovskites: reduced crystal microstrain and improved structural stability10.1021/acs.jpclett.9b01180 ↗
27. Characterization and analysis of FAxCs(1−x) Pb(IyBr(1−y))3 perovskite solar cells with thickness controlled transport layers for performance optimization10.1063/1.5123400 ↗
28. Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module10.1038/s41467-018-07099-9 ↗
29. Efficient inverted planar perovskite solar cells using ultraviolet/ozone treated NiOx as the hole transport layer10.1002/solr.201970063 ↗
30. An ultra-thin, un-doped NiO hole transporting layer of highly efficient (16.4%) organic-inorganic hybrid perovskite solar cells10.1039/C6NR01601D ↗
31. Electron-beam-evaporated nickel oxide hole transport layers for perovskite-based photovoltaics
32. Efficient and stable inverted planar perovskite solar cells using a triphenylamine hole-transporting material10.1002/cssc.201800476 ↗
33. Thermally stable methylammonium-free inverted perovskite solar cells with Zn2+ doped CuGaO2 as efficient mesoporous hole-transporting layer10.1016/j.nanoen.2019.04.042 ↗
34. Toward high-efficiency, hysteresis-less, stable perovskite solar cells: unusual doping of a hole-transporting material using a fluorine-containing hydrophobic Lewis acid10.1039/C8EE00036K ↗
35. Ultra-thin MoOx as cathode buffer layer for the improvement of all-inorganic CsPbIBr2 perovskite solar cells10.1016/j.nanoen.2017.08.048 ↗
36. Thermally stable methylammonium-free inverted perovskite solar cells with Zn2+ doped CuGaO2 as efficient mesoporous hole-transporting layer10.1016/j.nanoen.2019.04.042 ↗
37. Nickel oxide as efficient hole transport materials for perovskite solar cells10.1002/solr.201900001 ↗
38. Effect of hot-casted NiO hole transport layer on the performance of perovskite solar cells10.1016/j.solener.2019.06.040 ↗
39. Highly efficient flexible perovskite solar cells using solution-derived NiOx hole contacts10.1021/acsnano.5b08135 ↗
40. High efficiency hysteresis-less inverted planar heterojunction perovskite solar cells with a solution-derived NiOx hole contact layer10.1039/C5TA08193A ↗
41. Extrinsic ion migration in perovskite solar cells10.1039/C7EE00358G ↗
42. Suppressed ion migration in reduced-dimensional perovskites improves operating stability10.1021/acsenergylett.9b00892 ↗
43. Porous and intercrossed PbI2-CsI nanorod scaffold for inverted planar FA-Cs mixed-cation perovskite solar cells10.1021/acsami.8b20933 ↗
44. Oxygen doping in nickel oxide for highly efficient planar perovskite solar cells10.1039/C8TA00161H ↗