journal article·2018-08

Effects of high in-situ source/drain boron doping in p-FinFETs on physical and device performance characteristics

Shashidhar Shintri, Chloe Yong, Baofu Zhu, Shayan Byrappa, Bianzhu Fu, Hsien-Ching Lo, Dongil Choi, Venkat Kolagunta

Publisher page

Abstract

Abstract In this study, the effects of high in-situ boron (B) doping in embedded source/drain (S/D) silicon germanium (SiGe) stressor of p-channel Fin Field Effect Transistors (FinFETs) in a 14 nm technology node were investigated. The device results were correlated to physical characteristics of B doped S/D regions which were probed using Transmission Electron Microscopy (TEM), Electron Energy Loss Spectroscopy (EELS) and Low Energy Electron Induced X-ray Emission Spectroscopy (LEXES) on representative device structures. B doping was established to be around low-E20 atoms/cm3 range as measured by LEXES. Reduction in on-state resistance (RON) and an increase in drive current (ION) was observed with higher B doping in SiGe but physical constraints, especially B segregation offered manufacturable challenges. These observed results are expected to critically help in SiGe stressor based S/D junction optimization of advanced FinFET Complementary Metal-Oxide-Semiconductor (CMOS) devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Advancements in Semiconductor Devices and Circuit Design · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Integration of highly-strained SiGe materials in 14 nm and beyond nodes FinFET technology10.1016/j.sse.2014.07.008 ↗
2. M. Choi, V. Moroz, L. Smith, O. Penzin, "14 nm FinFET Stress Engineering with Epitaxial SiGe Source/Drain," Silicon-Germanium Technology and Device Meeting (ISTDM) International, Berkeley, CA, 2012, pp. 1–2. https://doi.org/10.1109/ISTDM.2012.6222469.10.1109/ISTDM.2012.6222469 ↗
3. Comprehensive Evaluation and study of pattern dependency behavior in selective epitaxial growth of B-doped SiGe layers10.1109/TNANO.2008.2009219 ↗
4. Investigation of In situ boron-doping in SiGe source/drain layer growth for PMOS devices10.1155/2015/537696 ↗
5. high quality SiGe:B of high Ge layer for 14nm and beyond FINFET processes10.1149/05807.0159ecst ↗
6. M.G. Bardon, V. Moroz, G. Eneman, P. Schuddinck, M. Dehan, D. Yakimets, D. Jang, G. Van der Plas, A. Mercha, A. Thean, D. Verkest, A. Steegen, "Layout-induced stress effects in 14nm & 10nm FinFETs and their impact on performance," 2013 Symposium on VLSI Technology, Kyoto, pp. T114-T115. 〈http://ieeexplore.ieee.org/stamp/stamp.jsp?Tp=&arnumber=6576617&isnumber=6576594〉.
7. Nickel Germanosilicide contacts formed on heavily boron doped Si1-xGex source/drain junctions for nanoscale CMOS10.1109/TED.2005.850613 ↗
8. In-situ boron doped SiGe epitaxy optimization for FinFET source/drain10.1149/07508.0265ecst ↗
9. Lattice diffusion and surface segregation of B during growth of SiGe heterostructures by molecular beam epitaxy: effect of Ge concentration and biaxial stress10.1063/1.1781767 ↗
10. International Technology Roadmap for Semiconductor (ITRS), Tech. Rep. [Online]. Available: 〈http://public.itrs.net/〉.
11. Comparative area and parasitics analysis in FinFET and heterojunction vertical TFET standard cells10.1145/2914790 ↗
12. Contact resistance reduction to FinFET source/drain using novel dielectric dipole Schottky barrier height modulation method10.1109/LED.2011.2148091 ↗
13. Sharp reduction of contact resistivities by effective Schottky barrier lowering With silicides as diffusion sources10.1109/LED.2010.2048992 ↗