journal article·2023-11Open access

Effect of Fe dopant on oxygen vacancy variation and enhanced photocatalysis hydrogen production of LaMnO3 perovskite nanofibers

Meiling Zhan, Minghao Fang, Liangyu Li, Yajing Zhao, Bozhi Yang, Xin Min, Pengpeng Du, Yan'gai Liu, Xiaowen Wu, Zhaohui Huang

Abstract

In the pursuit of enhancing the property of photocatalytic hydrogen production , strategies for enhancing light absorption and the separation and transport efficiency of photo-induced carriers have been studied. Perovskite photocatalyst has great application potential in the field of photocatalytic hydrogen production due to its special crystal structure. LaMn (1-x) Fe x O 3 (x = 0–0.08) perovskite nanofibers with diameters of 50–200 nm were synthesized by electrospinning, and their photochemical properties were investigated. The results of UV–Vis diffuse reflectance spectroscopy, PL spectroscopy, I-t, and EIS revealed that the doping with Fe could improve light absorption and reduce the recombination rate of photogenerated electron-hole pairs, and improve the separation and transfer efficiency of photogenerated electron-hole pairs, likely due to the increased concentration of oxygen vacancies caused by doping. Through optimization of the Fe doping amount, an improved hydrogen production efficiency of 767.71 μmol h −1 g −1 was achieved for LaMn 0·96 Fe 0·04 O 3 , which is 2.5 times the efficiency of undoped LaMnO 3 (300.74 μmol h −1 g −1 ). These results provide a new idea for the development of efficient photocatalysts for hydrogen production .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Perovskite Materials and Applications · Vascular Anomalies and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Depletion of fossil fuels and anthropogenic climate change—a review10.1016/j.enpol.2012.10.046 ↗
2. Heterogeneous photocatalyst materials for water splitting10.1039/B800489G ↗
3. Challenges and prospects in solar water splitting and CO2 reduction with inorganic and hybrid nanostructures10.1021/acscatal.8b00791 ↗
4. Photocatalytic hydrogen generation using metal-decorated TiO2 : sacrificial donors vs true water splitting10.1021/acsenergylett.8b00152 ↗
5. A review on g-C3N4-based photocatalysts10.1016/j.apsusc.2016.07.030 ↗
6. CdS-Based photocatalysts10.1039/C7EE03640J ↗
7. Facile fabrication of novel Ag2S/K-g-C3N4 composite and its enhanced performance in photocatalytic H2 evolution10.1016/j.jcis.2020.02.054 ↗
8. Microwave heating preparation of phosphorus doped g-C3N4 and its enhanced performance for photocatalytic H2 evolution in the help of Ag3PO4 nanoparticles10.1016/j.ijhydene.2020.03.169 ↗
9. Effect of oxygen vacancy variation on the photo-assisted degradation and structural phase transition of oxygen defective Ba(Fe,Co)O3−x10.1016/j.materresbull.2011.02.036 ↗
10. Room-temperature ABX3-typed molecular ferroelectric: [C5H9–NH3][CdCl3]10.1039/c3qi00058c ↗
11. Selective dissolution of A-site cations in ABO 3 perovskites: a new path to high-performance catalysts10.1002/anie.201502632 ↗
12. Perovskite materials as superior and powerful platforms for energy conversion and storage applications10.1016/j.nanoen.2020.105552 ↗
13. Photocatalytic oxidation of gaseous benzene, toluene and xylene under UV and visible irradiation over Mn-doped TiO2 nanoparticles10.1016/j.jmat.2018.12.003 ↗
14. Hydrogen evolution from photocatalytic water splitting by LaMnO3 modified with amorphous CoSx10.1007/s10853-019-04205-0 ↗
15. Modulating the electronic structure of lanthanum manganite by ruthenium doping for enhanced photocatalytic water oxidation10.1039/C7CP01444A ↗
16. MoS2-mesoporous LaFeO3 hybrid photocatalyst: highly efficient visible-light driven photocatalyst10.1016/j.ijhydene.2020.01.158 ↗
17. Fabrication of nanocrystalline LaFeO3: an efficient sol-gel auto-combustion assisted visible light responsive photocatalyst for water decomposition10.1016/j.ijhydene.2010.08.029 ↗
18. Catalytic properties of La1-xA'xFeO3(A' = Sr,Ce) and La1-xCexCoO310.1016/0021-9517(85)90193-9 ↗
19. Catalytic and redox properties of nano-sized La0.8Sr0.2Mn1-xFexO3-delta mixed oxides synthesized by different routes10.1016/j.molcata.2005.10.016 ↗
20. Synthesis, characterisation, catalytic activity and structural stability of LaCo1-yFeyO3±λperovskite catalysts for combustion of ethanol and propane10.1016/j.jcat.2006.03.020 ↗
21. Layered perovskite nanofibers via electrospinning for overall water splitting10.1002/smll.201402679 ↗
22. Chakarvarti · 1998 · vol. 29 · 149
23. Phase separation processes in polymer solutions in relation to membrane formation10.1016/0376-7388(96)00088-9 ↗
24. Photocatalytic degradation of malachite green dye from aqueous solution using environmentally compatible Ag/ZnO polymeric nanofibers10.3390/polym13132033 ↗
25. Li · 2003 · 17
26. SrTiO3 nanoparticles and nanofibers: synthesis and comparison of photocatalytic properties10.1007/s10854-017-7244-4 ↗
27. Perovskite materials as superior and powerful platforms for energy conversion and storage applications10.1016/j.nanoen.2020.105552 ↗
28. Catalytic oxidation of vinyl chloride emission over LaMnO3 and LaB0.2Mn0.8O3 (B = Co, Ni, Fe) catalysts10.1016/j.apcatb.2012.09.056 ↗
29. Structural and surface analysis of unsupported and alumina-supported La(Mn,Fe,Mo)O3 perovskite oxides10.1007/s00216-009-3308-5 ↗
30. Influence of Mg dopant on photocatalytic properties of Mg-doped ZnO nanoparticles prepared by sol–gel method10.2109/jcersj2.16202 ↗
31. Dual transfer channels of photo-carriers in 2D/2D/2D sandwich-like ZnIn2S4/g-C3N4/Ti3C2 MXene S-scheme/Schottky heterojunction for boosting photocatalytic H2 evolution, Chinese
32. A bifunctional CdS/MoO2/MoS2 catalyst enhances photocatalytic H2 evolution and pyruvic acid synthesis10.1002/anie.202212045 ↗
33. Plasmonic TiN nanobelts assisted broad spectrum photocatalytic H2 generation10.1016/j.jmst.2021.10.033 ↗
34. Photocatalytic evolution of H2 over visible-light active LaMO3 (M: Co, Mn, Fe) perovskite materials: roles of oxygenated species in catalytic performance10.1016/j.jpcs.2019.109189 ↗
35. Facile synthesis of g-C3N4/LaMO3 (M: Co, Mn, Fe) composites for enhanced visible-light-driven photocatalytic water splitting10.1016/j.mssp.2019.104643 ↗
36. Mössbauer study of lanthanum–strontium ferromanganite oxides10.1023/B:HYPE.0000043244.19471.1a ↗
37. Enhanced charge transport characteristics in zinc oxide nanofibers via Mg2+ doping for electron transport layer in perovskite solar cells and antibacterial textiles10.1016/j.ceramint.2022.05.018 ↗
38. Ag modified LaMnO3 nanorods-reduced graphene oxide composite applied in the photocatalytic discoloration of direct green10.1016/j.solidstatesciences.2016.10.008 ↗
39. Energy structure and photocatalytic activity for water splitting of Sr2(Ta1−XNbX)2O7 solid solution10.1016/S1010-6030(01)00574-3 ↗
40. A promising Ag2CrO4/LaFeO3 heterojunction photocatalyst applied to photo-Fenton degradation of RhB10.1080/09593330.2018.1538261 ↗
41. Tailoring the diameter of electrospun layered perovskite nanofibers for photocatalytic water splitting10.1039/C7TA09136B ↗
42. Perovskite oxides: materials science in catalysis10.1126/science.195.4281.827 ↗
43. Preparation of NaNbO3 microcube with abundant oxygen vacancies and its high photocatalytic N2 fixation activity in the help of Pt nanoparticles10.1016/j.jcis.2023.01.049 ↗
44. Greatly boosted photocatalytic N2-to-NH3 conversion by bismuth doping in CdMoO4: band structure engineering and N2 adsorption modification10.1016/j.seppur.2023.123554 ↗
45. One-step fabrication of Cu-doped Bi2MoO6 microflower for enhancing performance in photocatalytic nitrogen fixation10.1016/j.jcis.2023.02.005 ↗