journal article·2023-03

Proper annealing process for a cost effective and superhydrophobic ambient-atmosphere fabricated perovskite solar cell

Sadeq Abbasi, Xin Wang, Pattanasak Tipparak, Chawalit Bhoomanee, Pipat Ruankham, Hong Liu, Duangmanee Wongratanaphisan, Wenzhong Shen

Publisher page

Abstract

The conversion efficiency of perovskite solar cells has increased rapidly in recent years, however, the balance between sustainability, efficiency and cost has become a serious challenge on the way to a competitive commercial product. Currently, ongoing research is strongly focused on how to effectively combine those issues together. In this work, the sustainability and efficiency were shown to be improved by using a simple low-cost fabrication process: with a single electron transporting layer with low-temperature heat treatment (160 °C), a single-step perovskite layer (Cs 0.17FA 0.83Pb(I 0.83Br 0.17) 3 ) fabricated and annealed in air atmosphere, and low-cost imprinted carbon as the upper electrode. The annealing process of the active layer was studied to improve crystallinity and achieve the best grain boundary self-passivation under these conditions. Moreover, to develop sustainability, an easy-to-use superhydrophobic layer with a contact angle of ∼160 o was successfully deposited using an invented method. Morphology, crystallization, and optoelectronic properties of the devices were investigated using various measurement methods. It was found that a 15-min annealing at 130 °C is required to obtain an appropriate self-induced passivation layer of PbI 2 and a high-performance crystallized active layer with the lowest defect density. An optimum energy conversion efficiency of 17.34% was achieved with FF, V OC and J SC values of 76.43%, 1.04 V, and 21.67 mA cm −2 , respectively. It is hoped that these results will provide new perspectives for the commercialization of perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Performance and stability comparison of low-cost mixed halide perovskite solar cells: CH3NH3PbI3-Cl and CH3NH3PbI3-SCN
2. Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells10.1038/s41560-017-0060-5 ↗
3. Efficient wide-bandgap mixed-cation and mixed-halide perovskite solar cells by vacuum deposition10.1021/acsenergylett.0c02445 ↗
4. Mixed cation halide perovskite under environmental and physical stress10.3390/ma14143954 ↗
5. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
6. Efficient all-air processed mixed cation carbon-based perovskite solar cells with ultra-high stability10.1039/C9TA05744G ↗
7. Room-temperature carbon electrodes with ethanol solvent interlacing process for efficient and stable planar hybrid perovskite solar cells10.1016/j.egyr.2021.04.031 ↗
8. Thermal stability of mixed cation metal halide perovskites in air10.1021/acsami.7b15263 ↗
9. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
10. Passivation in perovskite solar cells: a review10.1016/j.mtener.2018.01.004 ↗
11. Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells10.1038/s41560-018-0219-8 ↗
12. Annealing effects on high-performance CH3NH3PbI3 perovskite solar cells prepared by solution-process10.1016/j.solener.2015.10.019 ↗
13. Effect of annealing temperature on film morphology of organic–inorganic hybrid pervoskite solid‐state solar cells10.1002/adfm.201304022 ↗
14. High-temperature–short-time annealing process for high-performance large-area perovskite solar cells10.1021/acsnano.7b02015 ↗
15. High annealing temperature induced rapid grain coarsening for efficient perovskite solar cells10.1016/j.jcis.2018.04.019 ↗
16. Heat dissipation effects on the stability of planar perovskite solar cells10.1039/D0EE02859B ↗
17. Fabrication of flexible perovskite solar cells via rapid thermal annealing
18. Annealing time effects on the structural, morphological and optical properties in hybrid CH3NH3PbI3 perovskites: experimental and ab-initio investigations10.1016/j.optmat.2020.110255 ↗
19. Annealing effects on interdiffusion in layered FA-rich perovskite solar cells10.1063/5.0046205 ↗
20. An approach to optimize pre-annealing aging and anneal conditions to improve photovoltaic performance of perovskite solar cells10.1007/s40243-018-0139-3 ↗
21. Understanding the formation and evolution of interdiffusion grown organolead halide perovskite thin films by thermal annealing10.1039/C4TA04007D ↗
22. Annealing effect on (FAPbI3) 1− x (MAPbBr3) x perovskite films in inverted-type perovskite solar cells10.3390/ma9090747 ↗
23. Room temperature, air crystallized perovskite film for high performance solar cells10.1039/C6TA02918C ↗
24. Correlation of annealing time with crystal structure, composition, and electronic properties of CH 3 NH 3 PbI 3− x Cl x mixed-halide perovskite films10.1039/C6CP06347K ↗
25. Formamidinium and cesium hybridization for photo‐and moisture‐stable perovskite solar cell10.1002/aenm.201501310 ↗
26. Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers10.1126/science.aah4046 ↗
27. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
28. Scaling-up perovskite solar cells on hydrophobic surfaces10.1016/j.nanoen.2020.105633 ↗
29. Hydrophobic perovskites based on an alkylamine compound for high efficiency solar cells with improved environmental stability10.1039/C9TA01569H ↗
30. Deep surface passivation for efficient and hydrophobic perovskite solar cells10.1039/D0TA10535J ↗
31. Highly efficient and stable perovskite solar cells with strong hydrophobic barrier via introducing poly (vinylidene fluoride) additive10.1016/j.jechem.2020.09.026 ↗
32. High performance carbon-based planar perovskite solar cells by hot-pressing approach10.1016/j.solmat.2020.110517 ↗
33. Self‐adhesive macroporous carbon electrodes for efficient and stable perovskite solar cells10.1002/adfm.201802985 ↗
34. Functionalization of graphene oxide via gamma-ray irradiation for hydrophobic materials
35. Preparation and characterisation of super‐hydrophobic surfaces10.1002/chem.200903335 ↗
36. Impact of temperature‐dependent hydration water on perovskite solar cells10.1002/solr.201900370 ↗
37. Importance of tailoring lattice strain in halide perovskite crystals10.1038/s41427-019-0187-x ↗
38. Relationship between lattice strain and efficiency for Sn-perovskite solar cells10.1021/acsami.9b09564 ↗
39. Lattice strain causes non-radiative losses in halide perovskites10.1039/C8EE02751J ↗
40. Photovoltaic effect in graphene/MoS2/Si van der Waals heterostructures10.3390/coatings8010002 ↗
41. Direct deposition of Sn-doped CsPbBr 3 perovskite for efficient solar cell application10.1039/D0RA09202A ↗
42. Charge carrier dynamics in Sn-doped two-dimensional lead halide perovskites studied by terahertz spectroscopy10.3389/fenrg.2021.658270 ↗
43. Impact of Sn doping on methylammonium lead chloride perovskite: an experimental study10.1063/1.5133457 ↗
44. INVESTIGATION OF STRUCTURAL AND OPTICAL PROPERTIES OF POWDER TIN OXIDE (SnO) ANNEALED IN AIR
45. Synthesis and characterization of nano-crystalline fluorine-doped tin oxide thin films by sol-gel method10.1023/A:1025697322395 ↗
46. FTIR study of the binary effect of titanium dioxide nanoparticles (nTiO2) and copper (Cu2+) on the biochemical constituents of liver tissues of catfish (Clarias gariepinus)10.1016/j.toxrep.2019.10.002 ↗
47. Eliminated hysteresis and stabilized power output over 20% in planar heterojunction perovskite solar cells by compositional and surface modifications to the low-temperature-processed TiO 2 layer10.1039/C7TA02317K ↗
48. Carbon electrodes in perovskite photovoltaics10.3390/ma14205989 ↗