journal article·2022-03

Fracture strength of silicon solar wafers with different surface textures

S.E. Nikitin, V.V. Shpeizman, A.O. Pozdnyakov, S.I. Stepanov, R.B. Timashov, V.I. Nikolaev, E.I. Terukov, A.V. Bobyl

Publisher page

Abstract

Surface texturing is widely used in modern photovoltaic converters to improve light capture and increase efficiency. This paper focuses on the influence of the surface texture on the mechanical strength of silicon wafers. Various existing test methods and approaches for measuring the mechanical strength of silicon wafers are discussed and reviewed. The surface morphology of silicon wafers with different textures is characterized by scanning electron microscopy (SEM). The mechanical strength of thin (<200 μm) silicon wafers with different surface textures is measured with a ring-on-ring bending test. A finite element method (FEM) is used to calculate the maximum stress. Weibull statistical theory is applied to the measured fracture stresses. The mean fracture strength, its standard deviation, the Weibull characteristic strength, and the Weibull modulus are obtained for silicon wafers with various surface textures. The fracture strength of silicon wafers is strongly affected by the surface texture. It is found that the fracture strength of silicon wafers with pyramidal textures increases with decreasing size of the pyramids. A new type of surface texture produced by a V 2O 5 selective oxidation exhibited fracture comparable or higher than that of the wafers with conventional pyramidal textures produced by alkaline etching.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Silicon and Solar Cell Technologies · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Solar cell efficiency tables (version 50)10.1002/pip.2909 ↗
2. Investigation of the characteristics of heterojunction solar cells based on thin single-crystal silicon wafers10.1134/S1063782618070230 ↗
3. Köntges · 2014
4. Stepanov · 1984
5. Comparative analysis of mechanical strength of diamond-sawn silicon wafers depending on saw mark orientation, crystalline nature and thickness10.1016/j.solmat.2019.110068 ↗
6. Diamond wire sawing of solar silicon wafers: a sustainable manufacturing alternative to loose abrasive slurry sawing10.1016/j.promfg.2018.02.156 ↗
7. Experimental investigation of the sawn surface of monocrystalline silicon cut by endless diamond wire sawing10.1590/1980-5373-mr-2020-0013 ↗
8. Effect of texturing and surface preparation on lifetime and cell performance in heterojunction silicon solar cells10.1016/j.solmat.2008.05.011 ↗
9. A comparative study of wet and dry texturing processes of c-Si wafers for the fabrication of solar cells10.1016/j.solener.2014.01.004 ↗
10. Texturing, reflectivity, diffuse scattering and light trapping in silicon solar cells10.1016/j.solener.2011.10.003 ↗
11. Enabling stress determination on alkaline textured silicon using Raman spectroscopy10.1016/j.egypro.2017.09.333 ↗
12. Light scattering and diffuse light propagation in sintered porous silicon10.1063/1.2956690 ↗
13. Wolf · 2007
14. Surface texture of single-crystal silicon oxidized under a thin V2O5 layer10.1134/S106378261701016X ↗
15. Effect of silicon solar cell processing parameters and crystallinity on mechanical strength10.1016/j.solmat.2010.04.038 ↗
16. Mechanical strength problem of thin silicon wafers (120 and 140 μm) cut with thinner diamond wires (Si kerf 120 → 100 μm) for photovoltaic use Halubai10.1016/j.mssp.2020.105209 ↗
17. Critical bending radius of thin single-crystalline silicon with dome and pyramid surface texturing10.1016/j.scriptamat.2017.06.047 ↗
18. Improved mechanical strength and reflectance of diamond wire sawn multi-crystalline silicon wafers by inductively coupled plasma (ICP) etching10.1016/j.solmat.2018.05.057 ↗
19. Comparative analysis of mechanical properties of Si substrates processed by different routes10.1002/pssa.201300003 ↗
20. Reduced effect of B-O degradation on multicrystalline silicon wafers
21. Mechanical strength of silicon solar wafers characterized by ring-on-ring test in combination with digital image correlation
22. The effect of texturing of silicon wafer surfaces for solar photoelectric transducers on their strength properties10.1134/S1063784220070191 ↗
23. Mechanical stability in crystalline silicon solar cells
24. On the correlation of surface roughness to mechanical strength and reflectivity of silicon wafers
25. Timoshenko · 1959
26. A method for determining the strength of sheet glass
27. The brittle strength of single crystals and its relation to longevity under static and cyclic loading
28. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
29. Frühauf · 2005
30. Wet-chemical preparation of textured silicon solar cell substrates: surface conditioning and electronic interface properties10.4028/www.scientific.net/SSP.187.349 ↗