Comparison of n and p type Si-based Schottky photodiode with interlayered Congo red dye
Source abstract
Abstract
Abstract We synthesized a thin film of Au nanoparticles-decorated Congo red (CR) dye on both n-Si and p-Si substrates by the spin coating technique. UV–Vis spectrometer was used to determine the absorbance and band gap of the CR film. Transmission electron microscope (TEM) was used to assess the distribution of Au nanoparticles on the CR dye film. Then, the metal-semiconductor devices were fabricated by evaporation of Co metal and Al ohmic contacts on the front and back surfaces of the CR film-covered substrates, respectively. Thus, Co/CR:Au/n-Si and Co/CR:Au/p-Si Schottky photodiodes were fabricated and characterized by I–V measurements under dark and various light power illumination intensities at room temperature. The devices exhibited good rectifying behaviors and low barrier heights. Various diode parameters such as ideality factor, barrier height, and series resistance values were calculated and compared for the two fabricated photodiodes. The Co/CR:Au/n-Si and Co/CR:Au/p-Si devices exhibited good photodiode and photodetector properties. Various detection parameters revealed that the obtained devices can be improved for optoelectronic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Nanowire Synthesis and Applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Organic materials for organic electronic devices10.1016/j.jiec.2013.09.036 ↗
2. Organic materials for optoelectronic applications: Overview
3. Developing molecular-level models for organic field-effect transistors
4. Light-sensing behaviors of organic/n-Si bio-hybrid photodiodes based on malachite green (MG) organic dye10.1007/s10854-020-04668-x ↗
5. Effect of illumination intensity on the characteristics of Co/Congo Red/p-Si/Al hybrid photodiode10.1007/s00339-019-3242-0 ↗
6. The surface morphology properties and respond illumination impact of ZnO/n-Si photodiode by prepared atomic layer deposition technique10.1016/j.jallcom.2016.08.295 ↗
7. Oncurrent-voltage and capacitance-voltage characteristics of metal-semiconductor contacts10.3906/fiz-2007-11 ↗
8. Photodiode detectors
9. Sensitivity improvement of silicon-on-insulator photodiode by gold nanoparticles with substrate bias control10.1063/1.3622650 ↗
10. Broadband absorption enhancement of thin SOI photodiode with high-density gold nanoparticles10.1364/OME.4.000725 ↗
11. Long-term stable organic photodetectors with ultra low dark currents for high detectivity applications10.1038/srep39201 ↗
12. Organic photodiodes: the future of full color detection and image sensing10.1002/adma.201505405 ↗
13. Optoelectronic properties of Co/pentacene/Si MIS heterojunction photodiode10.1016/j.physb.2020.412408 ↗
14. Full in silico DFT characterization of lanthanum and yttrium based oxynitride semiconductors for solar fuels10.1039/C8TC05749D ↗
15. Morphological and optical characteristics of chitosan(1−x):Cuox (4 ≤ x ≤ 12) based polymer nano-composites: optical dielectric loss as an alternative method for tauc's model10.3390/nano7120444 ↗
16. The modification of the characteristics of nanocrystalline ZnO thin films by variation of Ta doping content10.1080/14786435.2016.1195023 ↗
17. The effect of Pb doping on the characteristic properties of spin coated ZnO thin films: wrinkle structures10.1016/j.mssp.2015.06.064 ↗
18. The comparison of Co/hematoxylin/n-Si and Co/hematoxylin/p-Si devices as rectifier for a wide range temperature10.1016/j.mssp.2020.105039 ↗
19. Zandonay · 2008 · 359
20. Au nanoparticles-decorated surface plasmon enhanced ZnO nanorods ultraviolet photodetector on flexible transparent mica substrate10.1109/JEDS.2018.2889888 ↗
21. Using the surface plasmon resonance of Au nanoparticles to enhance ultraviolet response of ZnO nanorods-based Schottky-barrier photodetectors10.1109/TNANO.2015.2393877 ↗
22. The effect of plasmonic nanoparticles on the optoelectronic characteristics of CdTe nanowires10.1002/smll.201303388 ↗
23. Examination by interfacial layer and inhomogeneous barrier height model of temperature-dependent I–V characteristics in Co/p-InP contacts10.1016/j.jallcom.2009.05.062 ↗
24. Electrical and photovoltaic properties of Cr/Si Schottky diodes10.1016/j.ijhydene.2008.10.040 ↗
25. The Au/Cu2WSe4/p-Si photodiode: electrical and morphological characterization10.1016/j.jallcom.2018.11.372 ↗
26. Electrical parameters and series resistance analysis of Au/Y/p-InP/Pt Schottky barrier diode at room temperature10.1063/1.4948092 ↗
27. Charge transport mechanisms and density of interface traps in MnZnO/p-Si diodes10.1016/j.jallcom.2013.12.043 ↗
28. A modified forward I-V plot for Schottky diodes with high series resistance10.1063/1.325607 ↗
29. Extraction of Schottky diode parameters from forward current-voltage characteristics10.1063/1.97359 ↗
30. The Au/Cu2WSe4/p-Si photodiode: electrical and morphological characterization10.1016/j.jallcom.2018.11.372 ↗
31. Electrical properties of Al/PCBM:ZnO/p-Si heterojunction for photodiode application10.1016/j.jallcom.2020.154279 ↗
32. I-V and C-V characterization of a high-responsivity graphene/silicon photodiode with embedded MOS capacitor10.3390/nano7070158 ↗
33. A photodiode with high rectification ratio and low turn-on voltage based on ZnO nanoparticles and SubPc planar heterojunction10.1016/j.physe.2013.09.001 ↗