All-inorganic CsPbBr3 thin-film solar cells prepared by single-source physical vapor deposition
Source abstract
Abstract
Abstract Long-term stability and large-area are key to the commercialization of perovskite solar cells, and the all-inorganic perovskite CsPbBr3 has higher stability compared to organic-inorganic hybrid perovskites. In this work, a simple single-source physical vapor deposition (SSPVD) method is proposed for the evaporation of CsPbBr3 crystal powder to deposit high-quality all-inorganic CsPbBr3 perovskite thin films. The results show that the CsPbBr3 thin films prepared by SSPVD are dense and uniform, with high crystallinity and full surface coverage. After annealing optimization, high-quality CsPbBr3 thin films with good crystallinity and uniformity were obtained. The CsPbBr3 thin film has a high visible absorption coefficient and an optical forbidden bandwidth of 2.33 eV. The CsPbBr3 perovskite thin-film solar cells prepared based on the SSPVD method have a photoelectric conversion efficiency (PCE) of 1.37% with good reproducibility and high stability. These results tentatively suggest that SSPVD is a promising method for preparing high-quality all-inorganic perovskite CsPbBr3 thin films for solar cell applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Vacuum Flash−Assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
2. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Efficient and stable Ruddlesden–Popper perovskite solar cell with tailored interlayer molecular interaction10.1038/s41566-019-0572-6 ↗
5. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
6. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
7. Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3perovskite solar cells10.1016/j.nanoen.2019.104015 ↗
8. All vapor-deposited leadfree doped CsSnBr3 planar solar cells10.1016/j.nanoen.2016.09.009 ↗
9. Surface passivation engineering strategy to fully-inorganic cubic CsPbI3perovskites for highperformance solar cells
10. Dual interfacial design for efficient CsPbI2Br perovskite solar cells with improved photostability10.1002/adma.201901152 ↗
11. Interface modification-induced gradient energy band for highly efficient CsPbIBr2 perovskite solar cells10.1002/aenm.201803785 ↗
12. Crystal growth of the perovskite semiconductor CsPbBr3: a new material for high-energy radiation detection10.1021/cg400645t ↗
13. Slow photon effect induced photoelectrical conversion efficiency enhancement for carbon quantum dot sensitized inorganic CsPbBr3 inverse opal perovskite solar cells10.1002/adma.201703682 ↗
14. Synthesis of ligand-free, large scale with high quality allinorganic CsPbI3 and CsPb2Br5 nanocrystals and fabrication of all-inorganic perovskite solar cells10.1016/j.jallcom.2019.02.018 ↗
15. Low temperature synthesis of stable gamma CsPbI3 perovskite layers for solar cells obtained by high throughput experimentation10.1002/aenm.201900555 ↗
16. Bication lead iodide 2D perovskite component to stabilize inorganic a-CsPbI3 perovskite phase for high-efficiency solar cells10.1126/sciadv.1700841 ↗
17. All-inorganic CsPbBr3 perovskite solar cell with 10.26% efficiency by spectra engineering10.1039/C8TA08900K ↗
18. Mixed cation perovskite solar cells by stack-sequence chemical vapor deposition with self-passivation and gradient absorption layer10.1016/j.nanoen.2018.04.012 ↗
19. Smooth perovskite thin films and efficient perovskite solar cells prepared by the hybrid deposition method10.1039/C5TA03593G ↗
20. Methylammonium lead bromide perovskite light-emitting diodes by chemical vapor deposition10.1021/acs.jpclett.7b01093 ↗
21. Vacuum deposited perovskite solar cells employing dopant-free triazatruxene as the hole transport material10.1016/j.solmat.2017.01.037 ↗
22. Efficient and uniform planar-type perovskite solar cells by simple sequential vacuum deposition10.1002/adma.201402461 ↗
23. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
24. Efficient planar CsPbBr3 perovskite solar cells by dual-source vacuum evaporation10.1016/j.solmat.2018.07.009 ↗
25. A semitransparent inorganic perovskite film for overcoming ultraviolet light instability of organic solar cells and achieving 14.03% efficiency10.1002/adma.201800855 ↗
26. High-performance perovskite CH3NH3PbI3 thin films for solar cells prepared by single-source physical vapour deposition10.1038/srep29910 ↗
27. Microstructural and optical properties of HC(NH2)2PbI3 thin films prepared by single source thermal evaporation10.1007/s10854-017-8142-5 ↗
28. Hysteresis-free two-dimensional perovskite solar cells prepared by single-source physical vapour deposition10.1016/j.solener.2018.04.051 ↗
29. Single-source vapor-deposited Cs2AgBiBr6 thin films for lead-free perovskite solar cells10.3390/nano9121760 ↗
30. Fabrication of efficient CsPbBr3 perovskite solar cells by single-source thermal evaporation10.1016/j.jallcom.2019.152903 ↗
31. Synthesis and single crystal growth of perovskite semiconductor CsPbBr310.1016/j.jcrysgro.2017.12.020 ↗
32. Effect of lead-free (CH3NH3)3Bi2I9 perovskite addition on spectrum absorption and enhanced photo-voltaic performance of bismuth triiodide solar cells10.1016/j.jallcom.2017.01.169 ↗
33. Inorganic and Pb-free CsBi3I10Thin film for photovoltaic applications10.1021/acs.jpcc.9b09617 ↗
34. How important is the organic part of lead halide perovskite photovoltaic cells? Efficient CsPbBr3 cells10.1021/acs.jpclett.5b00968 ↗
35. Purcell effect in an organic-inorganic halide perovskite semiconductor microcavity system10.1063/1.4939724 ↗
36. Pure cubic-phase hybrid iodobismuthates AgBi2I7 for thin-film photovoltaics10.1002/anie.201603608 ↗
37. Exploring the way to approach the efficiency limit of perovskite solar cells by drift-diffusion model10.1021/acsphotonics.6b01043 ↗
38. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗