Fabrication and optimization of hole transport layer NiO for all inorganic perovskite light emitting diodes
Source abstract
Abstract
Abstract Perovskite light emitting diodes (PeLEDs) have attracted massive research interest in recent years. In order to obtain better luminescent properties, most attention is paid to the emitting layer perovskite materials. Actually, the other layers such as the transport layers should also be optimized. We proposed the optimization of hole transport layer NiO materials by magnetron sputtering. Effects of RF power, sputtering pressure and sputtering argon-oxygen ratio on surface morphology and electrical properties of NiO film were studied. Sputtering power, pressure and Ar/O2 were set at 90 W, 25 mTorr and 10/40 over the past parameters to optimize the NiO film in our previous ZnO/CsPbBr3/NiO structured all inorganic perovskite LED. SEM, PL, XRD measurements were conducted to characterize the CsPbBr3 having good morphologies, light emitting characteristics, and crystal quality. PeLEDs with and without the optimized hole transport layer NiO were compared. The EL results show that the optimized PeLED has much better electroluminescence characteristics than the one without optimization. Our work demonstrated a possible way to improve the luminescence properties of the PeLED.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Ga2O3 and related materials · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Low toxicity antisolvent synthesis of composition-tunable luminescent all-inorganic perovskite nanocrystals10.1016/j.ceramint.2018.07.018 ↗
2. Impact of small phonon energies on the charge-carrier lifetimes in metal-halide perovskites10.1021/acs.jpclett.7b03414 ↗
3. White-light emission from layered halide perovskites10.1021/acs.accounts.7b00433 ↗
4. All-inorganic metal halide perovskite nanocrystals: opportunities and challenges10.1021/acscentsci.8b00201 ↗
5. Two-dimensional halide perovskite nanomaterials and heterostructures10.1039/C7CS00886D ↗
6. Copper-substituted lead perovskite materials constructed with different halides for working (CH3NH3)(2)CuX4-based perovskite solar cells from experimental and theoretical view10.1021/acsami.8b00495 ↗
7. Large tunable photoeffect on ion conduction in halide perovskites and implications for photodecomposition10.1038/s41563-018-0038-0 ↗
8. Perovskites for light emission10.1002/adma.201801996 ↗
9. Fabrication of morphology-controlled and highly-crystallized perovskite microwires for long-term stable photodetectors10.1016/j.solmat.2018.11.027 ↗
10. Bright perovskite nanocrystal films for efficient light-emitting devices10.1021/acs.jpclett.6b02073 ↗
11. Boosting efficiency in polycrystalline metal halide perovskite light-emitting diodes10.1021/acsenergylett.9b00518 ↗
12. Self-assembled hierarchical nanostructured perovskites enable highly efficient LEDs via an energy cascade10.1039/C8EE00293B ↗
13. Improving the stability of metal halide perovskite materials and light-emitting diodes10.1002/adma.201704587 ↗
14. Air-stable all inorganic green perovskite light emitting diodes based on ZnO/CsPbBr3/NiO heterojunction structure10.1016/j.ceramint.2017.12.048 ↗
15. High performance metal halide perovskite light-emitting diode: from material design to device optimization10.1002/smll.201701770 ↗
16. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
17. A facile one-step solution deposition via non-solvent/solvent mixture for efficient organometal halide perovskite light-emitting diodes10.1039/C6NR01092J ↗
18. TiO2 electron transport bilayer for highly efficient planar perovskite solar cell10.1002/smll.201701535 ↗
19. ZnO-assisted growth of CH3NH3PbI3–xClx film and efficient planar perovskite solar cells with a TiO2/ZnO/C60 electron transport trilayer10.1021/acsami.8b05560 ↗
20. Influence of compact TiO2 layer on the photovoltaic characteristics of the organometal halide perovskite-based solar cells10.1016/j.mssp.2014.07.039 ↗
21. Mechanism of charge transfer and recombination dynamics in organo metal halide perovskites and organic electrodes, PCBM, and spiro-OMeTAD: role of dark carriers10.1021/jacs.5b08770 ↗
22. Miyata · 1997
23. Synthesis and characterization of spin-coatable tert-amine molecules for hole-transport in organic light-emitting diodes10.1016/j.tetlet.2006.04.117 ↗
24. Improvement of voltage and charge balance in inverted top-emitting organic electroluminescent diodes comprising doped transport layers by thermal annealing10.1063/1.3559847 ↗
25. Multilayer slot-die coating of large-area organic light-emitting diodes10.1016/j.orgel.2015.07.025 ↗
26. UV-visible broad spectrum light emitting device of ZnO/MgO/ITO structure10.1016/j.jlumin.2017.03.045 ↗
27. Structural changes in ZnO/NiO artificial superlattices made by ion beam sputtering10.1016/S0040-6090(97)00008-4 ↗
28. Recent developments in magnetron sputtering10.1088/1009-0630/8/3/20 ↗
29. Magnetron-sputtered nickel oxide films as hole transport layer for planar heterojunction perovskite solar cells10.1007/s00339-019-2769-4 ↗
30. Temperature-dependent photoluminescence on organic-inorganic metal halide perovskite CH3NH3PbI3-xClx prepared on ZnO/FTO substrates using a two-step method10.1088/1367-2630/19/1/017802 ↗
31. Modified Thornton model for magnetron sputtered zinc oxide: film structure and etching behaviour10.1016/S0040-6090(03)00949-0 ↗
32. Atomic peening effect in film sputtering process
33. Effect of growth parameters on the properties of RF-sputtered highly conductive and transparent p-type NiOx films10.1088/0268-1242/31/5/055016 ↗
34. Growth and characterization of NiO thin films prepared by dc reactive magnetron sputtering10.1016/j.solidstatesciences.2010.11.019 ↗
35. Maximizing the optical performance of planar CH 3 NH 3 PbI 3 hybrid perovskite heterojunction stacks10.1016/j.solmat.2015.10.007 ↗
36. Influence of the hole injection layer on the luminescent performance of organic light-emitting diodes10.1063/1.1775282 ↗