Tin telluride quantum dot thin films: Size dependent structural, optical and electrical properties
Source abstract
Abstract
Abstract In the current study, efforts have been made to acquire tin telluride quantum dot (QD) thin films that work at room temperature and in the region of visible and near-infrared (NIR). SnTe ingot and thin films were formed using the solid solution and inert gas condensation (IGC) techniques respectively. A cubic polymorph structure was identified using XRD for the prepared SnTe ingot, while grazing incident in-plane X-ray diffraction (GIIXD) and HR-TEM electron diffraction was used for identifying the thin films. The average particle size was found to increase from 2.3 to 9.6 nm with increasing film thickness from 5 to 25 nm. The optical gap of thin film QDs is wider than those of bulk samples; this is attributable to the quantum confinement effect. As a result of quantum confinement, SnTe thin films have optical gap values in the visible and NIR region (2–0.85 eV) instead of being in the infrared region (0.19 eV) of their bulk materials counterpart. The electronic transition was described by studying various important optical parameters such as optical conductivity ( σ op ), interband transition strength (JCV), and surface and volume energy loss functions (SELF, VELF). Electrical conductivity shows a degenerate semiconductor performance. I–V characteristic show symmetric nonlinear behavior for 10 and 15 nm film thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Synthesis of narrow band gap SnTe nanocrystals: nanoparticles and single crystal nanowires via oriented attachment
2. Phosphorus doped SnTe type needle-like crystals: band structure modifications and electronic properties10.1021/acs.jpcc.7b05317 ↗
3. The effects of Sn:Te ratio on optical properties of SnTe NPs10.1016/j.jlumin.2018.07.004 ↗
4. Investigation of band inversion in (Pb,Sn)Te alloys using ab initio calculations
5. Synthesis and thermoelectric properties of PbTe nanorods and microcubes10.1016/j.mseb.2009.05.004 ↗
6. One-step hydrothermal synthesis of carbon-coated PbTe nanowires for thermoelectric applications
7. Synthesis and nonlinear optical properties of Lead Telluride nanorods10.1016/j.optmat.2011.09.009 ↗
8. Shape-controlled narrow-gap SnTe nanostructures: from nanocubes to nanorods and nanowires10.1021/jacs.5b09490 ↗
9. SnTe nanocrystals: a new example of narrow-gap semiconductor quantum dots10.1021/ja074481z ↗
10. Self-driven, broadband and ultrafast photovoltaic detectors based on topological crystalline insulator SnTe/Si heterostructures10.1039/C7TA02222K ↗
11. Large-scale surfactant-free synthesis of p-type SnTe nanoparticles for thermoelectric applications10.3390/ma10030233 ↗
12. Simple routes to synthesis and characterization of nanosized tin telluride Compounds
13. Synthesis of PbTe-SnTe particles by thermal decomposition of salts to create nano-structured thermoelectric materials10.1002/crat.201200010 ↗
14. Solution synthesis and optical properties of SnTe nanocrystals10.1021/cg200660y ↗
15. CdTe thin film solar cells with a SnTe buffer layer in back contact10.1016/j.solmat.2017.12.018 ↗
16. Crystal shape Engineering of topological crystalline insulator SnTe Microcrystals and Nanowires with huge thermal activation energy gap10.1021/cg5002122 ↗
17. Solvothermal synthesis of PbTe/SnTe hybrid nanocrystals10.1016/j.cclet.2014.03.031 ↗
18. Synthesis of SnTe nanoplates with {100} and {111} surfaces10.1021/nl501953s ↗
19. Topological crystalline insulator nanostructures10.1039/C4NR05124F ↗
20. Solution-phase synthesis of monodispersed SnTe nanocrystallites at room temperature10.1016/S1387-7003(02)00707-4 ↗
21. Topological surface transport properties of single-crystalline SnTe nanowire10.1021/nl402841x ↗
22. Morphological control of SnTe nanostructures by tuning catalyst composition10.1007/s12274-015-0806-y ↗
23. Structural and electrical characterization of sintered SnTe films
24. Nanocrystalline Tin as a preparative tool: Synthesis of unprotected Nanoparticles of SnTe and SnSe and a new Route to (PhSe)4Sn10.1021/ic020272y ↗
25. Single-layer MoS2 transistors10.1038/nnano.2010.279 ↗
26. Ultrasensitive photodetectors based on monolayer MoS210.1038/nnano.2013.100 ↗
27. Effect of film thickness on optical properties of tin selenide thin films prepared by thermal evaporation for photovoltaic applications10.5923/j.materials.20120201.08 ↗
28. Size dependent physical Properties of spray deposited nanocrystalline Cd0.5Fe0.5Se thin films
29. Photoinduced electrical bistability of sputter deposited CdZnTe thin films10.1088/2053-1591/aaad90 ↗
30. Structure and electrical studies on nanostructured ZnTe thin films10.1007/s13391-012-2159-y ↗
31. Investigation of size-dependent optical and morphological properties of nanocrystalline ZnSe films10.1016/S1386-9477(02)00664-1 ↗
32. Structural, electrical, and optical properties of PbTe thin films prepared by simple flash evaporation method
33. Structure, optical and electrical characterization of tin selenide thin films deposited at room temperature using thermal evaporation method
34. Cullitty · 1978
35. Composition stability limits for the rocksalt-structure phase (Pb1−ySny)1−xTex from lattice parameter measurements10.1016/0022-3697(71)90004-7 ↗
36. Yepifanov · 1974
37. Study of the structural, electrical and optical properties of Ge-Pb-Te nanocrystals10.1140/epjd/e2016-70307-2 ↗
38. Structural and optical properties of PbSe nanostructure thin films prepared by inert gas condensation10.1016/j.physe.2014.01.009 ↗
39. Characterization of Pb24Te76 quantum dot thin film synthesized by inert gas condensation10.1016/j.saa.2014.06.055 ↗
40. Study of the structural, electrical and optical properties of Ge-Pb-Te nanocrystals10.1140/epjd/e2016-70307-2 ↗
41. The capability of SnTe QDs as QDSCs working in the visible–NIR region and the effects of Eu-doping on improvement of solar cell parameter10.1007/s10854-018-0023-z ↗
42. Tauc · 1974 · vol. 4
43. Pankove · 1971
44. Electronic states of SnTe and PbTe (001) monolayers with supports10.1016/j.susc.2015.04.009 ↗
45. Room temperature MIR detection through localized surface vibrational states of SnTe nanocrystals10.1021/acssensors.8b00448 ↗
46. Optical and morphological investigation of aluminium and nickel oxide composite films deposited by spray pyrolysis method as a basis of solar thermal absorber10.1007/s12034-015-0880-5 ↗
47. Investigation of the post-annealing electromagnetic response of Cu–Co oxide coatings via optical measurement and computational modeling10.1039/C6RA25626K ↗
48. Structural and optical studies of laser ablated nanostructured CdTe thin films
49. Origins and applications of london dispersion forces and hamaker constants in ceramics10.1111/j.1151-2916.2000.tb01527.x ↗
50. Kramers–Kronig transform for the surface energy loss function10.1016/j.elspec.2004.09.002 ↗
51. Mott · 1971
52. Study of the ferroelectric properties of Ge–Sb–Te alloys10.1016/j.physb.2006.02.029 ↗
53. Study of transport properties of Ge50-xSbyTe50+x-y thin film alloy10.1007/s10853-005-5907-7 ↗