Bonding strength enhancement of low temperature sintered SiC power module by femtosecond laser induced micro/nanostructures
Source abstract
Abstract
In this work, a low-temperature and low-pressure method was proposed for the bonding strength enhancement of SiC chips and substrates using micro/nanostructures fabricated by femtosecond laser. It is demonstrated that a reliable bond was achieved at 180 °C without assistant pressure. When the sintering temperature reached 250 °C and the assistant pressure was 10 MPa, the average shear strength reached 45 MPa, which was more than 3 times that of the flat substrate. The fracture surface morphology and the cross-section of the sample were characterized by SEM to analyze the enhancement mechanism of shear strength. The shear strength under different sintering conditions was also discussed. The thermomechanical coupled finite element simulation results demonstrate that the power module possessed excellent thermal capability and reliable lifetime under a temperature shock environment (−50 °C–250 °C). It is proved that the measured temperature distribution of the joint is in agreement with the simulation results. This method has great application prospects in microelectronic packaging, especially for wide-bandgap power semiconductors.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Review of Silicon Carbide power devices and their applications10.1109/TIE.2017.2652401 ↗
2. Necking growth and mechanical properties of sintered Ag particles with different shapes under air and N2 atmosphere10.1007/s10853-019-03813-0 ↗
3. Emerging trends in wide band gap semiconductors (SiC and GaN) technology for power devices10.1016/j.mee.2017.11.021 ↗
4. Comparing the mechanical and thermal-electrical properties of sintered copper (Cu) and sintered silver (Ag) joints10.1016/j.jallcom.2021.158783 ↗
5. Review of silver nanoparticle based die attach materials for high power/temperature applications10.1016/j.microrel.2017.01.010 ↗
6. Mechanical properties of nano-silver joints as die attach materials10.1016/j.jallcom.2011.10.092 ↗
7. Are sintered silver joints ready for use as interconnect material in microelectronic packaging?10.1007/s11664-013-2967-3 ↗
8. Electrical/thermal behaviors of bimetallic (Ag-Cu, Ag-Sn) nanoparticles for printed electronics
9. Identifying the development state of sintered silver (Ag) as a bonding material in the microelectronic packaging via a patent landscape study10.1115/1.4033069 ↗
10. Room-temperature continuous-wave electrically pumped InGaN/GaN quantum well blue laser diode directly grown on Si10.1038/s41377-018-0008-y ↗
11. Cooperative bilayer of lattice-disordered nanoparticles as room-temperature sinterable nanoarchitecture for device integrations10.1021/acsami.9b00307 ↗
12. Densification and grain growth during sintering of nanosized particles10.1179/174328008X353538 ↗
13. One-Step fabrication of 3D nanohierarchical nickel nanomace array to sinter with silver NPs and the interfacial analysis10.1021/acsami.6b13031 ↗
14. Low-temperature copper bonding strategy with graphene interlayer10.1021/acsnano.7b07739 ↗
15. Low-temperature insertion bonding using electroless Cu-Co-P micro-cones array with controllable morphology10.1007/s13391-021-00302-y ↗
16. Mechanical properties and microstructure of low temperature sintered joints using organic-free silver nanostructured film for die attachment of SiC power electronics
17. The fabrication of micro/nano structures by laser machining
18. Combined pulse laser: Reliable tool for high-quality, high-efficiency material processing10.1016/j.optlastec.2022.108209 ↗
19. Advances in laser drilling of structural ceramics10.3390/nano12020230 ↗
20. Interface reaction and evolution of micron-sized Ag particles paste joining on electroless Ni-/Pd-/Au-finished DBA and DBC substrates during extreme thermal shock test
21. Microstructural and mechanical evolution of silver sintering die attach for SiC power devices during high temperature applications10.1016/j.jallcom.2018.10.067 ↗
22. Strengthening of DBA substrate with Ni/Ti/Ag metallization for thermal fatigue-resistant Ag sinter joining in GaN power modules10.1007/s10854-020-02930-w ↗
23. Thermal shock performance of DBA/AMB substrates plated by Ni and Ni(-)P layers for high-temperature applications of power device modules
24. Development of thermal shock-resistant of GaN/DBC die-attached module by using Ag sinter paste and thermal stress relaxation structure10.1016/j.microrel.2018.07.044 ↗
25. Low-temperature copper bonding strategy via hierarchical microscale taper array fabricated by femtosecond laser10.1088/1612-202X/ab6f74 ↗
26. Bonding strength enhancement by Ag-Zn-Cu intermetallic compounds and microscale tapers array fabricated by femtosecond laser10.1007/s10854-021-06473-6 ↗
27. Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser10.1016/j.apsusc.2019.144131 ↗
28. Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation10.1016/j.mssp.2020.105299 ↗
29. An investigation of recast behavior in laser ablation of 4H-silicon carbide wafer10.1016/j.mssp.2019.104701 ↗
30. Constitutive equations for the rate-dependent deformation of metals at elevated temperatures10.1115/1.3225028 ↗
31. Fatigue life of leadless chip carrier solder joints during power cycling10.1109/TCHMT.1983.1136183 ↗
32. Fabrication of grating structures on silicon carbide by femtosecond laser irradiation and wet etching10.3788/COL201614.021407 ↗
33. Lifetime prediction of a SiC power module by micron/submicron Ag sinter joining based on fatigue, creep and thermal properties from room temperature to high temperature
34. Influencing factors of fatigue life of nano-silver paste in chip interconnection10.1007/s11664-020-08501-3 ↗
35. Applying Anand model to low-temperature sintered nanoscale silver paste chip attachment10.1016/j.matdes.2009.04.006 ↗
36. One-step fabrication of multifunctional fusiform hierarchical micro/nanostructures on copper by femtosecond laser10.1016/j.surfcoat.2019.04.005 ↗
37. Low temperature sintering of Ag nanoparticles for flexible electronics packaging10.1063/1.3502604 ↗
38. 3D pyramid-shape Ag plating assisted interface connection growth of sinter micron-sized Ag paste10.1016/j.scriptamat.2019.12.040 ↗
39. Robust bonding and thermal-stable Ag-Au joint on ENEPIG substrate by micron-scale sinter Ag joining in low temperature pressure-less10.1016/j.jallcom.2020.154397 ↗