journal article·2022-08

Investigation of temperature-dependent electrical parameters in a Schottky barrier diode with multi-walled carbon nanotube (MWCNT) interface

Hüseyin Ezgin, Ersin Demir, Selim Acar, Metin Özer

Publisher page

Abstract

We research the electrical parameters of the MWCNT/n-6H-SiC Schottky barrier diode (SBD) as a function of temperature. Voltage-dependent current and the capacitance measurements of the diode have been made between the temperatures of 300-480 K. The surface of the diode coated with CNT by drop drying method is examined by Scanning Electron Microscopy (SEM) and Raman Spectroscopy. It has been observed that MWCNTs coat on the semiconductor randomly and as entangled tubes, and the intensity in the D line is higher than in the G line. The ideality factor and barrier heights obtained from Thermionic Emission (TE) theory are in the range of 1.64-1.07 and 0.76-1.10 eV, respectively. The ideality factor and barrier heights of the produced diode are strongly related to temperature. By using Cheung-Cheung and Norde methods, series resistance, ideality factor, and barrier height parameters are calculated depending on temperature. It is effective in changing the series resistance of MWCNTs used as interface material. Capacitance-voltage (C-V) measurements of the MWCNT/n6H-SiC Schottky barrier diode are made at different frequencies at 300 K and a frequency of 1 MHz depending on different temperature. The increase of the produced diode capacitance at low frequencies is associated with the interface states.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Silicon Nanostructures and Photoluminescence · Silicon Carbide Semiconductor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Carbon nanotube - a review on synthesis, properties and plethora of applications in the field of biomedical science10.1016/j.sintl.2020.100003 ↗
2. Carbon nanotubes: applications in pharmacy and medicine
3. Temperature dependence of the current-voltage characteristics of a carbon-nanotube heterojunction10.1103/PhysRevB.64.161404 ↗
4. Vertically aligned carbon-nanotube arrays showing Schottky behavior at room temperature10.1002/smll.200400114 ↗
5. The nature of contact between Pd leads and semiconducting carbon nanotubes10.1063/1.2405393 ↗
6. Interactions between metals and carbon nanotubes: at the interface between old and new materials10.1039/b9nr00127a ↗
7. Interface dynamic behavior between a carbon nanotube and metal electrode10.1002/adma.200901113 ↗
8. Schottky barriers in carbon nanotube-metal contacts10.1063/1.3664139 ↗
9. Band alignment of a carbon nanotube/n-type 6H-SiC heterojunction formed by surface decomposition of SiC using photoelectron spectroscopy10.1063/1.4748792 ↗
10. Temperature dependence of interface barrier height change as implicated by field emission studies of aligned-multiwall carbon nanotubes10.1016/S0375-9601(03)00161-0 ↗
11. Electrical transport properties of isolated carbon nanotube/Si heterojunction Schottky diodes10.1063/1.4829155 ↗
12. Very low Schottky barrier height at carbon nanotube and silicon carbide interface10.1063/1.4916248 ↗
13. Gas sensor based on p-phenylenediamine reduced graphene oxide10.1016/j.snb.2012.01.016 ↗
14. Investigation of various Mg(x)Fe(1−x)2O4 (x = 0.1, 0.5 and 0.9) nanostructures as a resistive and flexible LPG sensor
15. Fabrication of transparent Mg(OH)2 thin films by drop-dry deposition10.3390/ma14040724 ↗
16. Raman spectroscopy and field-emission properties of CVD-grown carbon-nanotube films10.1007/s003390100923 ↗
17. Change in conformation of polymerPFO on addition of multiwall carbon nanotubes10.1039/c0nr00001a ↗
18. Catalytic growth of multi-walled carbon nanotubes using NiFe2O4 nanoparticles and incorporation into epoxy matrix for enhanced mechanical properties10.1515/polyeng-2015-0137 ↗
19. Preparation and modification of carbon nanotubes10.1016/j.matlet.2005.07.081 ↗
20. Temperature dependence of interface barrier height change as implicated by field emission studies of aligned-multiwall carbon nanotubes10.1016/S0375-9601(03)00161-0 ↗
21. H2SO4/HNO3/HCl-Functionalization and its effect on dispersion of carbon nanotubes in aqueous media10.1016/j.apsusc.2008.07.144 ↗
22. Sze · 2007
23. Temperature dependence of current-and capacitance-voltage characteristics of an Au/4H-SiC Schottky diode10.1016/j.spmi.2014.09.035 ↗
24. Investigation of electrical parameters of Au/P3HT:PCBM/n-6H–SiC/Ag Schottky barrier diode with different current conduction models10.1016/j.spmi.2020.106658 ↗
25. Investigation of inhomogeneous barrier height for Au/n-type 6H-SiC Schottky diodes in a wide temperature range10.1016/j.spmi.2018.10.004 ↗
26. The effects of the temperature and annealing on current-voltage characteristics of Ni/n-type 6H-SiC Schottky diode10.1016/j.mee.2007.11.005 ↗
27. Current-conduction mechanism in Au/n-4H-SiC Schottky barrier diodes
28. Rhoderick · 1988
29. Electrochemical tuning of indium phosphide∣poly(acetylene) interfaces10.1016/S0020-1693(99)00242-X ↗
30. Extraction of Schottky diode parameters from forward current‐voltage characteristics10.1063/1.97359 ↗
31. A modified forward I‐V plot for Schottky diodes with high series resistance10.1063/1.325607 ↗
32. Current transport in Pd2Si/n-Si(100) Schottky barrier diodes at low temperatures
33. Electron transport at metal-semiconductor interfaces: general theory10.1103/PhysRevB.45.13509 ↗
34. Analysis of temperature-dependent Schottky barrier parameters of Cu–Au Schottky contacts to n-InP10.1139/p11-142 ↗
35. Comment on “Analysis of I-V measurements on CrSi2/Si Schottky structures in a wide temperature range10.1016/0038-1101(95)00148-M ↗
36. Al/Ti/4H-SiC Schottky barrier diodes with inhomogeneous barrier heights
37. Current-voltage characteristics of Ag/TiO2/n-InP/Au Schottky barrier diodes10.1063/1.5064637 ↗
38. Analysis of electrical characteristics of Er/p-InP Schottky diode at high temperature range10.1016/j.cap.2013.01.046 ↗
39. Barrier inhomogeneities at Schottky contacts10.1063/1.347243 ↗
40. Barrier inhomogeneities at Schottky contacts
41. Goldberg · 2001 · 93
42. Temperature dependence of the Schottky-barrier height of tungsten on n-type and p-type silicon
43. A method for the determination of barrier heights from the capacitance-voltage characteristics of a Schottky junction containing bulk deep traps10.1016/0038-1101(95)98666-Q ↗
44. Temperature dependence of the electrical characteristics of Yb/p‐InP tunnel metal‐insulator‐semiconductor junctions10.1063/1.346358 ↗
45. Modelization and characterization of Au/InSb/InP Schottky systems as a function of temperature10.1016/S0921-5107(98)00168-8 ↗
46. Schottky barrier height and interface chemistry of annealed metal contacts to alpha 6H-SiC: crystal face dependence10.1063/1.109257 ↗
47. Analysis of Schottky barrier heights of metal/SiC contacts and its possible application to high-voltage rectifying devices10.1002/1521-396X(199707)162:1<389::AID-PSSA389>3.0.CO;2-X ↗