journal article·2022-11

First-principles investigation of lead-free trigonal CsGeI3-xBrx mixed-halide perovskite system for optoelectronic applications: Electronic and optical properties

Saeed S.I. Almishal, Ola Rashwan

Publisher page

Abstract

A stable, non-toxic, environmentally benign substitute to the Pb 2+ cation is indispensable for large-scale commercialization of the halide perovskite optoelectronic devices in general and the halide perovskite solar cells specifically. In this paper, Density Functional Theory (DFT) with two exchange-correlation functionals PBE and PBEsol, was employed to investigate the structural, electronic, and optical properties of the trigonal inorganic CsGeI 3-xBr x halide Perovskite system (x = 0, 1, 2 and 3 which representing Br content). The system`s properties were compared to the cubic α-CsPbI3 which has been extensively investigated. Our results confirmed that replacing the Pb 2+ cation with the Ge 2+ cation caused a distortion in the halide octahedral cage which results in a non-centrosymmetric structure. The changes in the structural properties resulted in changes in the electronic and optical properties. A strong negative correlation was found between the Ge -X bond length and the bandgap. The electronic density of states revealed that only I 5p, Br 4p, and Ge 4s states contributed to the valence band maximum, (VBM), whereas, the conduction band minimum, (CBM), is mainly contributed by Ge 4p states in the CsGeI 3-xBr x system. Having the mixed halide compounds altered the electronic and optical properties significantly. As the bromide content increases, the bandgap increases, and the optical absorption band widenes. Replacing the Pb 2+ with Ge 2+ has red-shifted the absorption peaks and has altered the optical behavior to be anisotropic. This study shed some light on the high-potential of tuning and optimizing the optoelectronic properties of the Ge- based mixed halide perovskite family for the photovoltaic tandem solar cells and other optoelectronic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
2. Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications10.1039/c3ta10518k ↗
3. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
4. Perovskite as light harvester: a game changer in photovoltaics10.1002/anie.201308719 ↗
5. A layered hybrid perovskite solar‐cell absorber with enhanced moisture stability10.1002/ange.201406466 ↗
6. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
7. Best Research-Cell Efficiency Chart,” NREL, 2021. [Online]. Available: ffi(ciency.html" title="https://www.nrel.gov/pv/cell-efficiency.html">https://www.nrel.gov/pv/cell-efficiency.html).
8. Cesium enhances long-term stability of lead bromide perovskite-based solar cells10.1021/acs.jpclett.5b02597 ↗
9. New accurate molecular dynamics potential function to model the phase transformation of cesium lead triiodide perovskite (CsPbI3)10.1039/D0RA08434D ↗
10. Electronic structures of lead iodide based low-dimensional crystals10.1103/PhysRevB.67.155405 ↗
11. Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter‐wave spectroscopy10.1063/1.453467 ↗
12. First-principles study of the Structural and the electronic properties of the lead-Halide-based inorganic-organic perovskites (CH3NH3) PbX3 and CsPbX3 (X= Cl, Br, I)
13. A comparative study of the structural and electronic properties of orthorhombic and cubic CsPbI3 and trigonal CsGeI3 using first-principles calculations
14. Energetics, structures, and phase transitions of cubic and orthorhombic cesium lead iodide (CsPbI3) polymorphs10.1021/jacs.9b05924 ↗
15. Cubic or orthorhombic? Revealing the crystal structure of metastable black-phase CsPbI3 by theory and experiment10.1021/acsenergylett.8b00672 ↗
16. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
17. Tuning the optical properties of cesium lead halide perovskite nanocrystals by anion exchange reactions10.1021/jacs.5b05602 ↗
18. Lead-free perovskite materials for solar cells10.1007/s40820-020-00578-z ↗
19. Large dielectric constant, high acceptor density, and deep electron traps in perovskite solar cell material CsGeI310.1039/C6TA04685A ↗
20. Evidence of improved power conversion efficiency in lead-free CsGeI3 based perovskite solar cell heterostructure via scaps simulation
21. Lead-free solid-state organic–inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
22. Relativistic GW calculations on CH 3 NH 3 PbI 3 and CH 3 NH 3 SnI 3 perovskites for solar cell applications10.1038/srep04467 ↗
23. A cation‐exchange approach for the fabrication of efficient methylammonium tin iodide perovskite solar cells10.1002/anie.201902418 ↗
24. Influence of defects and synthesis conditions on the photovoltaic performance of perovskite semiconductor CsSnI310.1021/cm503122j ↗
25. Toward lead-free perovskite solar cells10.1021/acsenergylett.6b00499 ↗
26. Lead‐free organic–inorganic hybrid perovskites for photovoltaic applications: recent advances and perspectives10.1002/adma.201605005 ↗
27. Opportunities and challenges of lead-free perovskite optoelectronic devices10.1016/j.trechm.2019.04.004 ↗
28. Composition-dependent chemical and structural stabilities of mixed tin–lead inorganic halide perovskites10.1039/D0CP03170D ↗
29. Hybrid germanium iodide perovskite semiconductors: active lone pairs, structural distortions, direct and indirect energy gaps, and strong nonlinear optical properties10.1021/jacs.5b01025 ↗
30. Lead-free germanium iodide perovskite materials for photovoltaic applications10.1039/C5TA05741H ↗
31. First principles calculations of linear and second-order optical responses in rhombohedrally distorted perovskite ternary halides, CsGeX3 (X= Cl, Br, and I)
32. Pressure-induced phase transition in CsGeBr3 studied by X-ray diffraction and Raman spectroscopy10.1006/jssc.1995.1305 ↗
33. Different structural evolutions of inorganic perovskite CsGeI310.1039/D1CE00364J ↗
34. The linear and nonlinear optical response of CsGeX3 (X= Cl, Br, and I): the finite field and first-principles investigation10.1016/j.ijleo.2018.10.159 ↗
35. Study on mid-IR NLO crystals CsGe(BrxCl1−x)310.1016/j.optmat.2008.01.004 ↗
36. Characterization and properties of infrared NLO crystals: AGeX3 (A= Rb, Cs; X= Cl, Br)10.1016/j.jcrysgro.2008.03.018 ↗
37. First principles selection and design of mid-IR nonlinear optical halide crystals10.1039/c3tc31283f ↗
38. Electro-optic response in germanium halide perovskites10.1021/acs.jpclett.7b03353 ↗
39. New infrared nonlinear optical crystal CsGeBr3: synthesis, structure and powder second-harmonic generation properties10.1088/0953-8984/17/46/011 ↗
40. First-principles modeling of mixed halide organometal perovskites for photovoltaic applications10.1021/jp4048659 ↗
41. Electronic structure of CsPbBr3−xClx perovskites: synthesis, experimental characterization, and DFT simulations10.1039/C9CP03656C ↗
42. Structural, electronic, stability, and optical properties of CsPb1–x Sn x IBr2 perovskites: a first-principles investigation10.1021/acs.jpcc.9b04841 ↗
43. First-Principle insights of electronic and optical properties of cubic organic–inorganic MAGe x Pb (1–x) I3 perovskites for photovoltaic applications10.1021/acs.jpcc.8b08436 ↗
44. Anomalous alloy properties in mixed halide perovskites10.1021/jz501896w ↗
45. Enhanced performance of germanium halide perovskite solar cells through compositional engineering10.1021/acsaem.8b00007 ↗
46. Role of structural phases and octahedra distortions in the optoelectronic and excitonic properties of CsGeX3 (X= Cl, Br, I) perovskites10.1021/acs.jpcc.1c05245 ↗
47. Electronic structure and optical properties of rhombohedral CsGeI3 crystal10.1088/0953-8984/12/43/303 ↗
48. First-principles insight into the photoelectronic properties of Ge-based perovskites10.1039/C6RA18534G ↗
49. Exploring electronic and optical properties of Ge-based perovskites under strain: insights from the first-principles calculations10.1016/j.saa.2019.118013 ↗
50. Towards lead-free perovskite photovoltaics and optoelectronics by ab-initio simulations10.1038/s41598-017-13172-y ↗
51. Efficient iterative schemes forab initiototal-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
52. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
53. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
54. Restoring the density-gradient expansion for exchange in solids and surfaces10.1103/PhysRevLett.100.136406 ↗
55. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
56. Large-scale benchmark of exchange–correlation functionals for the determination of electronic band gaps of solids10.1021/acs.jctc.9b00322 ↗
57. Improved lower bound on the indirect Coulomb energy10.1002/qua.560190306 ↗
58. Functional designed to include surface effects in self-consistent density functional theory10.1103/PhysRevB.72.085108 ↗
59. The dynamics of methylammonium ions in hybrid organic–inorganic perovskite solar cells
60. High-temperature structural evolution of caesium and rubidium triiodoplumbates10.1016/j.jpcs.2008.05.007 ↗
61. Large dielectric constant, high acceptor density, and deep electron traps in perovskite solar cell material CsGeI310.1039/C6TA04685A ↗
62. On the application of the tolerance factor to inorganic and hybrid halide perovskites: a revised system10.1039/C5SC04845A ↗
63. Rapid discovery of ferroelectric photovoltaic perovskites and material descriptors via machine learning10.1002/smtd.201900360 ↗
64. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
65. First principle study of the structural and optoelectronic properties of cubic perovskites CsPbM3 (M= Cl, Br, I)10.1016/j.physb.2011.05.028 ↗
66. 3‐D optical modeling of thin‐film silicon solar cells on diffraction gratings10.1002/pip.1257 ↗
67. Optical modeling of MAPbBr3 perovskite intermediate band solar cells(IBSCs) with quantum dots
68. A high dielectric constant non-fullerene acceptor for efficient bulk-heterojunction organic solar cells10.1039/C7TA10136H ↗