journal article·2022-02

Investigation of abrasive behavior between pad asperity and oxide thin film in chemical mechanical planarization

Sanghuck Jeon, Jungryul Lee, Seokjun Hong, Hyeonmin Seo, Yeongkwang Cho, Pengzhan Liu, Kihong Park, Taesung Kim

Publisher page

Abstract

Abstract In this paper, tribological effects on the material removal rate (MRR) are investigated using two types of slurry abrasives (i.e., ceria and silica) and three types of pads. From a micro to macro viewpoint, the physico-chemical interaction between the pad-wafer interface and abrasive was studied based on multi-asperity contact. First, the relative contact pressure in high or low proportions among all asperities was calculated using a contact mechanics model. The results indicate that for the commercial slurry used in the semiconductor industry, relatively high contact pressure due to the asperities can be transferred to the ceria abrasives, and only a low contact pressure can be supported by these silica abrasives. Furthermore, it was confirmed that the two different slurry abrasives showed opposite behaviors according to the real contact area of the pad asperities. That is, as the pad texture changed from ‘Desired pad’ to ‘Smoothed pad’, the MRR of the ceria increased by 47%, while the MRR of the silica decreased 59%. Lastly, the Stribeck curve, which is suitable for the CMP process, was re-analyzed to clarify the abrasion mechanism under the pad asperity scale. The results showed that two-body abrasion may be maintained for the ceria CMP, and transition is possible from two-body to three-body abrasion at the silica CMP as the contact area increases. The present paper is expected to clarify the tribological mechanism of the oxide CMP and can provide further insight into optimizing and selecting consumables such as conditioner, pad, and slurry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Changes in surface layer of silicon wafers from diamond scratching10.1016/j.cirp.2015.04.005 ↗
2. A novel approach of high speed scratching on silicon wafers at nanoscale depths of cut
3. A novel approach of mechanical chemical grinding10.1016/j.jallcom.2017.08.024 ↗
4. New deformation-induced nanostructure in silicon10.1021/acs.nanolett.8b01910 ↗
5. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
6. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
7. A novel approach of chemical mechanical polishing for a titanium alloy using an environment-friendly slurry10.1016/j.apsusc.2017.08.064 ↗
8. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
9. A novel slurry for chemical mechanical polishing of single crystal diamond10.1016/j.apsusc.2021.150431 ↗
10. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
11. A numerical study on slurry flow with CMP pad grooves10.1016/j.mee.2020.111437 ↗
12. Engineering surface texture of pads for improving CMP performance of sub-10 nm nodes10.1149/2162-8777/abbcb5 ↗
13. A plasticity-based model of material removal in chemical-mechanical polishing (CMP)10.1109/66.964328 ↗
14. A mathematical model for chemical–mechanical polishing based on formation and removal of weakly bonded molecular species10.1016/S0043-1648(03)00015-2 ↗
15. Elmufdi · 2006 · 914
16. Elmufdi · 2007 · 991
17. Combined asperity contact and fluid flow model for chemical-mechanical polishing
18. Von mises stress in chemical‐mechanical polishing processes10.1149/1.1837542 ↗
19. The theory and design of plate glass polishing machines
20. A chemical mechanical polishing model incorporating both the chemical and mechanical effects10.1016/j.tsf.2003.09.060 ↗
21. The role of pad topography in chemical-mechanical polishing10.1109/TSM.2014.2335156 ↗
22. A micro-contact and wear model for chemical–mechanical polishing of silicon wafers10.1016/S0043-1648(01)00871-7 ↗
23. Material removal mechanism in chemical mechanical polishing: theory and modeling10.1109/66.920723 ↗
24. Oxide CMP mechanisms
25. Chemical processes in glass polishing10.1016/0022-3093(90)90200-6 ↗
26. White · 2010 · 1249
27. Role of different additives on silicon dioxide film removal rate during chemical mechanical polishing using ceria-based dispersions10.1149/1.3457387 ↗
28. Role of the oxidation state of cerium on the ceria surfaces for silicate adsorption10.1016/j.apsusc.2016.06.193 ↗
29. Increase in Ce3+ concentration of ceria nanoparticles for high removal rate of SiO2 in chemical mechanical planarization10.1149/2.0371709jss ↗
30. Direct and quantitative study of ceria–SiO2 interaction depending on Ce3+ concentration for chemical mechanical planarization (CMP) cleaning10.1016/j.mssp.2020.105500 ↗
31. Role of the surface chemistry of ceria surfaces on silicate adsorption10.1021/am500816y ↗
32. The effect of hydrogen peroxide on polishing removal rate in CMP with various abrasives10.1016/j.apsusc.2008.10.040 ↗
33. Effect of pad surface micro-texture on removal rate during interlayer dielectric chemical mechanical planarization process10.7567/JJAP.52.018001 ↗
34. Prediction of real contact area from microtopography on CMP pad10.1299/jamdsm.6.113 ↗
35. Soft chemical mechanical polishing pad for oxide CMP applications10.1149/2162-8777/abdc40 ↗
36. Investigation of the impact of pad surface texture from different pad conditioners on the CMP performance10.1149/2162-8777/aba726 ↗
37. Impact of pad material properties on CMP performance for sub-10nm technologies10.1149/2.0121905jss ↗
38. Contact of nominally flat surfaces
39. Kim · 2013
40. An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow10.1115/1.555332 ↗
41. Johnson · 1987
42. Pad roughness evolution during break-in and its abrasion due to the pad-wafer contact in oxide CMP10.1016/j.mee.2013.04.027 ↗
43. Effect of conditioner type and downforce, and pad break-in time, on pad surface micro-texture in chemical mechanical planarization10.1149/2.0261811jss ↗
44. The effect of pad-asperity curvature on material removal rate in chemical-mechanical polishing10.1016/j.procir.2014.03.014 ↗
45. Fundamental tribological and removal rate studies of inter-layer dielectric chemical mechanical planarization10.1143/JJAP.42.6371 ↗
46. Pad scratching in chemical-mechanical polishing: the effects of mechanical and tribological properties10.1149/2.027405jss ↗
47. Pad roughness variation and its effect on material removal profile in ceria-based CMP slurry10.1016/j.jmatprotec.2007.10.033 ↗
48. Effects of pad properties on material removal in chemical mechanical polishing10.1016/j.jmatprotec.2006.11.216 ↗
49. Polishing pad surface characterisation in chemical mechanical planarisation10.1016/j.jmatprotec.2004.04.094 ↗
50. Effect of CVD-coated diamond discs on pad surface micro-texture and polish performance in copper CMP10.1149/2.0051802jss ↗
51. Effect of pad surface roughness on SiO2 removal rate in chemical mechanical polishing with ceria slurry10.1143/JJAP.45.733 ↗
52. Effect of pad surface roughness on material removal rate in chemical mechanical polishing using ultrafine colloidal ceria slurry10.1007/s13391-012-2144-5 ↗
53. Post cleaning for FEOL CMP with silica and ceria slurries10.1149/2.0101710jss ↗
54. Ceria concentration effect on chemical mechanical polishing of optical glass10.1016/j.apsusc.2006.10.074 ↗
55. Effect of various slurry injection system configurations on removal rates of silicon dioxide using a ceria-based chemical mechanical planarization slurry10.1149/2.0311707jss ↗
56. Mechanism of polishing of SiO2 films by CeO2 particles10.1016/S0022-3093(01)00364-7 ↗
57. Investigating effect of conditioner aggressiveness on removal rate during interlayer dielectric chemical mechanical planarization through confocal microscopy and dual emission ultraviolet-enhanced fluorescence imaging10.1143/JJAP.49.026501 ↗
58. Investigations of the pad trajectory effect on the asymmetric profile and arc-shaped scratches in chemical mechanical polishing10.1149/2162-8777/ac14db ↗
59. The effect of slurry viscosity on chemical–mechanical polishing of silicon wafers10.1016/S0924-0136(02)00205-4 ↗
60. Ludema · 2018
61. Wear by hard particles10.1016/S0301-679X(98)00079-6 ↗
62. Kandeva-Ivanova · 2016
63. Pad surface characterization and its effect on the tribological state in chemical mechanical polishing
64. Centrifugal and hydroplaning phenomena in high-speed polishing10.1016/j.cirp.2019.04.018 ↗
65. Effect of pad groove width on slurry mean residence time and slurry utilization efficiency in CMP10.1016/j.mee.2016.02.035 ↗
66. Tribological, thermal and kinetic characterization of SiO2 and Si3N4 polishing for STI CMP on blanket and patterned wafers10.1149/2162-8777/ab89bc ↗
67. Effects of slurry particles on silicon dioxide CMP10.1149/1.1768133 ↗
68. A study of abrasive wear under three-body conditions10.1016/0043-1648(61)90002-3 ↗
69. Movement patterns of abrasive particles in three-body abrasion10.1016/0043-1648(93)90079-2 ↗
70. Effects of particle size, polishing pad and contact pressure in free abrasive polishing10.1016/S0043-1648(96)07275-4 ↗