journal article·2022-09

Recent advancement in perovskite solar cell with imidazole additive

Ibtasam Bin Abdul Ghani, Misha Khalid, Muhammad Irfan Hussain, Muhammad Muzammal Hussain, Rizwan Ashraf, Jianxin Wang

Publisher page

Abstract

In this review, we briefly summarize imidazole (Im) and its derivatives as an additive for perovskite solar cells (PSCs) to enhance not only efficiency but also long-term stability. The energy conversion efficiency of halide PSCs has exceeded 25%, which is one of the most attractive photovoltaic technologies. However, one of the main bottlenecks toward their commercialization is their long-term stability, which requires that their life span should be more than 20 years. Additive engineering has been demonstrated to be an effective way to improve the lifetime of devices. Some organic or inorganic additives have been used to promote grain growth and increase power conversion efficiency (PCE). To enhance the performance of PSCs, the intrinsic defect density of polycrystalline halide perovskite films is required to be low enough to suppress the charge recombination loss. The stability of Im-modified perovskite films was improved by limiting the migration of ions at grain boundaries. Im as an aromatic and diamine species with a small ionic radius can be alloyed appropriately to increase bond interaction with ABX 3 lattice, thus resulting in additional stability to air, light, and heat. A-site cation engineering for perovskite by utilizing imidazolium (IA) cation affords a tolerance factor of 1 to modulate the perovskite crystallization. These findings will pave an avenue for synergistically modulating crystallization and healing defect in perovskite to achieve efficient and stable solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Edenhofer · 2011
2. Recent trends in efficiency-stability improvement in perovskite solar cells, Mater
3. A review on perovskite solar cells: evolution of architecture, fabrication techniques, commercialization issues and status10.1016/j.solener.2020.01.080 ↗
4. Renewable energy capacity highlights
5. A review of solar cell fundamentals and technologies
6. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
7. Perovskite-based solar cells: materials, methods, and future perspectives10.1155/2018/8148072 ↗
8. Strategies of modifying Spiro-OMeTAD materials for perovskite solar cells: A review10.1039/D0TA11564A ↗
9. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
10. A review of aspects of additive engineering in perovskite solar cells10.1039/C9TA07657C ↗
11. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability10.1126/science.1254763 ↗
12. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
13. Intrinsic femtosecond charge generation dynamics in single crystal CH3NH3PbI310.1039/C5EE02503F ↗
14. Progress of high-throughput and low-cost flexible perovskite solar cells10.1002/solr.201900556 ↗
15. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites10.1038/nphys3357 ↗
16. A review on perovskite lanthanum aluminate (LaAlO3), its properties and applications10.1088/2053-1591/ab4629 ↗
17. Perovskite solar cells: importance, challenges, and plasmonic enhancement10.1080/15435075.2020.1818567 ↗
18. Synthesis, optoelectronic properties and applications of halide perovskites10.1039/C9CS00848A ↗
19. Perovskite oxides for visible-light-absorbing ferroelectric and photovoltaic materials10.1038/nature12622 ↗
20. Critical review of recent progress of flexible perovskite solar cells, Mater
21. Chemical approaches for stabilizing perovskite solar cells10.1002/aenm.201903249 ↗
22. Research progress on hybrid organic–inorganic perovskites for photo-applications10.1016/j.cclet.2020.05.016 ↗
23. Study of the effect of temperature on light-induced degradation in methylammonium lead iodine perovskite solar cells10.1016/j.solmat.2020.110770 ↗
24. A strategy to produce high efficiency, high stability perovskite solar cells using functionalized ionic liquid-dopants
25. Highly efficient and stable perovskite solar cells produced by maximizing additive engineering10.1039/D0SE01498B ↗
26. A review on additives for halide perovskite solar cells
27. Role of ionic liquids in organic-inorganic metal halide perovskite solar cells efficiency and stability10.1016/j.nanoen.2019.06.024 ↗
28. Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite10.1038/s41598-017-12436-x ↗
29. Universal approach toward hysteresis-free perovskite solar cell via defect engineering10.1021/jacs.7b10430 ↗
30. Effect of different imidazolium-based ionic liquids on gel polymer electrolytes for dye-sensitized solar cells10.1007/s11581-018-2603-6 ↗
31. A review on “imidazoles”: their chemistry and pharmacological potentials
32. Amphoteric imidazole doping induced large-grained perovskite with reduced defect density for high performance inverted solar cells10.1016/j.solmat.2020.110553 ↗
33. In situ synthesis of a sandwich-like graphene@ZIF-67 heterostructure for highly sensitive nonenzymatic glucose sensing in human serums10.1021/acsami.8b22478 ↗
34. An aromatic diamine molecule as the A-site solute for highly durable and efficient perovskite solar cells
35. Interweaving isomerism and isomerization of molecular chains10.1039/c1cc10365b ↗
36. Core@shell CsPbBr3@zeolitic imidazolate framework nanocomposite for efficient photocatalytic CO2 reduction10.1021/acsenergylett.8b01658 ↗
37. Coupling halide perovskites with different materials: from doping to nanocomposites, beyond photovoltaics10.1016/j.pmatsci.2020.100639 ↗
38. Coordination modulated crystallization and defect passivation in high quality perovskite film for efficient solar cells10.1016/j.ccr.2020.213408 ↗
39. Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts10.1126/science.aax3294 ↗
40. Universal approach toward hysteresis-free perovskite solar cell via defect engineering10.1021/jacs.7b10430 ↗
41. Efficient perovskite solar cells fabricated through CsCl-enhanced PbI2 precursor via sequential deposition
42. Highly efficient perovskite solar cells via nickel passivation10.1002/adfm.201804286 ↗
43. NbF5: A novel α-phase stabilizer for fa-based perovskite solar cells with high efficiency10.1002/adfm.201807850 ↗
44. Reducing surface halide deficiency for efficient and stable iodide-based perovskite solar cells10.1021/jacs.9b13418 ↗
45. † Beijing, A breakthrough efficiency of 19.9% obtained in inverted perovskite solar cells by using an efficient trap state passivator Cu(Thiourea)I10.1021/jacs.7b01439 ↗
46. Enhancing the efficiency and stability of perovskite solar cells by incorporating CdS and Cd(SCN2H4)2Cl2 into the CH3NH3PbI3 active layer10.1039/C8TA09933B ↗
47. Intermolecular π–π conjugation self-assembly to stabilize surface passivation of highly efficient perovskite solar cells
48. Efficient bifacial passivation with crosslinked thioctic acid for high-performance methylammonium lead iodide perovskite solar cells
49. Tetra-ammonium zinc phthalocyanine to construct a graded 2D–3D perovskite interface for efficient and stable solar cells, Chin
50. Rare-earth-containing perovskite nanomaterials: design, synthesis, properties and applications10.1039/C9CS00330D ↗
51. Review of status developments of high-efficiency crystalline silicon solar cells
52. Solar cells with 20% efficiency and lifetime evaluation of epitaxial wafers10.1016/j.egypro.2016.07.069 ↗
53. High-efficiency n-type hp mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
54. Amin · 2017 · 11
55. Electrical characterization and comparison of CIGS solar cells made with different structures and fabrication techniques10.1016/j.solmat.2017.08.027 ↗
56. Characterisation of CdS/CdTe heterojunction solar cells by current-voltage measurements at various temperatures under illumination10.1016/j.egypro.2012.02.035 ↗
57. Enhancement of the photocurrent and efficiency of CdTe solar cells suppressing the front contact reflection using a highly-resistive ZnO buffer layer10.1016/j.solmat.2018.11.002 ↗
58. Bhati · 2019
59. A three-dimensional thiophene-annulated perylene bisimide as a fullerene-free acceptor for a high performance polymer solar cell with the highest PCE of 8.28% and a: Voc over 1.0 v10.1039/C7TC05261H ↗
60. Review of latest efficient sensitizer in dye-sensitized solar cells
61. How Do Perovskite solar cells work?10.1016/j.joule.2018.03.020 ↗
62. Addressing the stability issue of perovskite solar cells for commercial applications10.1038/s41467-018-07255-1 ↗
63. One-Year stable perovskite solar cells by 2D/3D interface engineering10.1038/ncomms15684 ↗
64. Cost analysis of perovskite tandem photovoltaics10.1016/j.joule.2018.05.001 ↗
65. The surface-enhanced Raman scattering of all-inorganic perovskite quantum dots of CsPbBr3 encapsulated in a ZIF-8 metal-organic framework10.1039/D0NJ03587D ↗
66. From exceptional properties to stability challenges of perovskite solar cells10.1002/smll.201802385 ↗
67. A review on energy band-gap engineering for perovskite photovoltaics10.1002/solr.201970116 ↗
68. Perovskite solar cells - An overview of critical issues10.1016/j.pquantelec.2017.05.002 ↗
69. Current progress and future prospective of perovskite solar cells: a comprehensive review10.1515/rams-2018-0012 ↗
70. Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis10.1038/ncomms13831 ↗
71. Photophysics of metal halide perovskites: from materials to devices10.7567/JJAP.57.090101 ↗
72. Recent progress and challenges of electron transport layers in organic–inorganic perovskite solar cells
73. Tolerance factors of hybrid organic-inorganic perovskites: recent improvements and current state of research10.1039/C8TA05794J ↗
74. Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys10.1021/acs.chemmater.5b04107 ↗
75. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
76. The perovskite fever and beyond10.1021/acs.accounts.6b00067 ↗
77. Perovskite solar cells for bipv application: A review10.3390/buildings10070129 ↗
78. Additive engineering for stable halide perovskite solar cells10.1016/j.jechem.2021.01.037 ↗
79. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
80. Hybrid organic-inorganic halide perovskites10.1063/5.0034825 ↗
81. Recent progress in single-crystalline perovskite research including crystal preparation, property evaluation, and applications10.1002/advs.201700471 ↗
82. Environmental, and thermal stability, materials for energy and sustainability10.1039/C7TA00434F ↗
83. 6.5% Efficient perovskite quantum-dot-sensitized solar cell10.1039/c1nr10867k ↗
84. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
85. O-methoxy substituents in Spiro-OMeTAD for efficient inorganic-organic hybrid perovskite solar cells10.1021/ja502824c ↗
86. Perovskites: solar cells & engineering applications - materials and device developments10.1016/j.solener.2015.09.041 ↗
87. A molecularly engineered hole-transporting material for efficient perovskite solar cells10.1038/nenergy.2015.17 ↗
88. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
89. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
90. Research direction toward scalable, stable, and high efficiency perovskite solar cells10.1002/aenm.201903106 ↗
91. Review on persistent challenges of perovskite solar cells' stability10.1016/j.solener.2021.03.005 ↗
92. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
93. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
94. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films10.1039/C6EE02941H ↗
95. The role of grain boundaries in perovskite solar cells10.1002/aenm.201901489 ↗
96. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
97. Thermal behavior of methylammonium lead-trihalide perovskite photovoltaic light harvesters10.1021/cm502468k ↗
98. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics10.1039/C4SC03141E ↗
99. Structural origins of light-induced phase segregation in organic-inorganic halide perovskite photovoltaic materials10.1016/j.matt.2019.11.001 ↗
100. Suppression and reversion of light-induced phase separation in mixed-halide perovskites by oxygen passivation10.1021/acsenergylett.9b01383 ↗