Fabrication of CZTS thin films and solar cells via single-step Co-evaporation method
Source abstract
Abstract
Despite remarkable enhancements that have been achieved during the past years, the photovoltaic performance of CZTS is far below the theoretical expectation. It appears that the profound breakthrough has to be made internally in the aspect of absorber itself, indicating the significance of fabrication strategies. Therefore, this study adopts the single-step co-evaporation method, which has been proved essentially successful for CIGS, to simultaneously achieve on-site deposition and considerably handy control of the film growth process. On this basis, we demonstrate that ZnS segregation can be alleviated through subtle growth profile modification. According to the evolution of series resistance and the conversion efficiency, the carrier transport blocking behavior which arises from ZnS is distinctly reduced. Furthermore, we achieve substantial control of the Sn-contained volatile phases so that the chemical equilibrium is beneficially shifted and the decomposition of CZTS is suppressed, bringing in significantly improved photovoltaic performance compared to the references. A power conversion efficiency of 4.3% is achieved with a considerable open-circuit voltage of 608 mV. The results in this study validate the potential along with the convenience of the single-step co-evaporation method.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
2. CIGS module manufacturing with high deposition rates and efficiencies
3. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
4. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
5. CZTS based thin film solar cells: a status review10.1179/1753555712Y.0000000038 ↗
6. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
7. Optical designs that improve the efficiency of Cu2ZnSn(S,Se)4solar cells10.1039/C3EE42541J ↗
8. Preparation and evaluation of Cu2ZnSnS4 thin films by sulfurization of E- B evaporated precursors10.1016/S0927-0248(97)00119-0 ↗
9. Formation of Cu 2 ZnSnS 4 thin film solar cell by CBD-annealing route: comparison of Cu and CuS in stacked layers SnS/Cu(S)/ZnS10.1016/j.solener.2016.01.023 ↗
10. Characterization of a CZTS thin film solar cell grown by sputtering method10.1016/j.solener.2013.11.035 ↗
11. Coevaporation of Cu2ZnSnSe4 thin films10.1063/1.3483760 ↗
12. Fabrication of Cu2ZnSnS4 thin films by co-evaporation
13. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗
14. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
15. Beyond 10% efficient CZTSSe thin-film solar cells fabricated by a two-step CdS deposition process10.1016/j.solmat.2018.02.002 ↗
16. Performance enhancement of CIGS thin-film solar cell10.1016/j.ijleo.2020.164948 ↗
17. Growth mechanisms of co-evaporated kesterite: a comparison of Cu-rich and Zn-rich composition paths10.1002/pip.2296 ↗
18. Cu2ZnSnS4 thin film solar cells by fast coevaporation10.1002/pip.976 ↗
19. Elemental sulfur10.1021/cr60301a003 ↗
20. The vapor pressures of sulphur between 100 and 550 with related thermal data10.1021/j150306a002 ↗
21. Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursors10.1016/j.solmat.2008.11.045 ↗
22. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗
23. A detrimental reaction at the molybdenum back contact in Cu2ZnSn (S, Se) 4 thin-film solar cells10.1021/ja308862n ↗
24. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
25. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
26. Structural and elemental characterization of high efficiency Cu2ZnSnS4 solar cells10.1063/1.3543621 ↗
27. The role of secondary phase precipitation on grain boundary electrical activity in Cu2ZnSnS4 (CZTS) photovoltaic absorber layer material10.1063/1.4769738 ↗
28. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells?10.1002/aenm.201502276 ↗
29. Determination of secondary phases in kesterite Cu2ZnSnS4 thin films by x-ray absorption near edge structure analysis10.1063/1.3671994 ↗
30. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
31. Direct evidence of current blocking by ZnSe in Cu2ZnSnSe4 solar cells10.1063/1.4706256 ↗
32. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
33. Loss mechanisms influence on Cu2ZnSnS4/CdS-based thin film solar cell performance10.1016/j.sse.2015.05.038 ↗
34. Is it possible to develop complex S–Se graded band gap profiles in kesterite-based solar cells?10.1021/acsami.9b09813 ↗
35. Rear band gap grading strategies on Sn–Ge-alloyed kesterite solar cells10.1021/acsaem.0c01146 ↗
36. Influence of Cu2S, SnS and Cu2ZnSnSe4 on optical properties of Cu2ZnSnS410.1016/j.matlet.2017.05.069 ↗
37. The role of secondary phase precipitation on grain boundary electrical activity in Cu2ZnSnS4 (CZTS) photovoltaic absorber layer material10.1063/1.4769738 ↗
38. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
39. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4absorber10.1002/pip.1174 ↗
40. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗