journal article·2021-11

Hydrothermal synthesis of ZnSnO3/rGO composite material and highly gas sensing performance to acetone

Lili Jiang, Kang Xue, Zhaoyu Chen, Qi Cui, Su Xu

Publisher page

Abstract

Abstract This study used the hydrothermal method to synthesize ZnSnO3 and ZnSnO3/rGO composite material with hierarchical and porous structure. ZnSnO3 was attached on the surface of rGO or between the lamellar layers to form a physically boned heterojunction semiconductor composite material. The ZnSnO3/rGO sensing material shows better gas-sensing properties than ZnSnO3 sensor to acetone. Compared with the operating temperature of ZnSnO3 sensor (425 °C), the optimal operating temperature of ZnSnO3/rGO sensor was only 350 °C, the sensitivity to 50 ppm acetone gas was 80.371, and the response/recovery time was only 4 /27 s. The improved gas-sensing performance of ZnSnO3/rGO sensing material can be ascribed to the large specific surface area, hierarchical, porous structure, and unique heterojunction of the composite material. The high sensitivity, fast response/recovery characteristics, excellent selectivity and stability of ZnSnO3/rGO make it an ideal sensing material for detecting acetone.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Characterization and acetone gas sensing properties of electrospun TiO2 nanorods10.1016/j.spmi.2015.01.022 ↗
2. The use of furfural for the determination of acetone bodies in biological fluids10.1139/o58-112 ↗
3. Rapid determination of acetone in human plasma by gas chromatography-mass spectrometry and solid-phase microextraction with on-fiber derivatization10.1016/j.jchromb.2004.03.001 ↗
4. Preparation of porous SnO2 microcubes and their enhanced gas-sensing property10.1016/j.snb.2014.10.128 ↗
5. Synthesis of three-dimensional flower-like hierarchical ZnO nanostructure and its enhanced acetone gas sensing properties10.1016/j.jallcom.2015.09.120 ↗
6. 3D printed CuO semiconducting gas sensor for ammonia detection at room temperature10.1016/j.mssp.2020.105546 ↗
7. Highly sensitive NiO nanoparticle based chlorine gas sensor10.1007/s11664-018-6176-y ↗
8. Fabrication of aggregated In2O3 nanospheres for highly sensitive acetaldehyde gas sensors10.1016/j.jallcom.2018.09.183 ↗
9. Mechanism of the sensitivity enhancement in TiO2 hollow-hemisphere gas sensors10.3365/eml.2010.12.135 ↗
10. Sub-ppm H2S sensing at room temperature using CuO thin films10.1016/j.snb.2010.09.043 ↗
11. High performance H2 sensor based on ZnSnO3 cubic crystallites synthesized by a hydrothermal method10.1016/j.talanta.2012.10.051 ↗
12. Size-controlled synthesis of ZnSnO3 cubic crystallites at low temperatures and their HCHO-sensing properties10.1021/jp104733e ↗
13. Hydrothermal synthesis of hollow ZnSnO3 microspheres and sensing properties toward butane10.1016/j.snb.2010.10.026 ↗
14. Rapid and selective H2S detection of hierarchical ZnSnO3 nanocages10.1016/j.snb.2011.06.080 ↗
15. Highly sensitive formaldehyde chemical sensor based on in situ precipitation synthesis of ZnSnO3 microspheres10.1007/s10854-015-3207-9 ↗
16. Reduced graphene oxide for room-temperature gas sensors10.1088/0957-4484/20/44/445502 ↗
17. Reduced graphene oxide-CuFe2O4 nanocomposite: a highly sensitive room temperature NH3 gas sensor10.1016/j.snb.2018.05.093 ↗
18. Fast response of carbon monoxide gas sensors using a highly porous network of ZnO nanoparticles decorated on 3D reduced graphene oxide10.1016/j.apsusc.2017.11.047 ↗
19. Reduced graphene oxide (rGO) decorated TiO2 microspheres for selective room-temperature gas sensors10.1016/j.snb.2016.02.069 ↗
20. Facile synthesis of ultrafine rGO/WO3 nanowire nanocomposites for highly sensitive toxic NH3 gas sensors10.1016/j.materresbull.2020.110810 ↗
21. Sn3O4/rGO heterostructure as a material for formaldehyde gas sensor with a wide detecting range and low operating temperature10.1016/j.snb.2020.127954 ↗
22. rGO-wrapped porous LaFeO3 microspheres for high-performance triethylamine gas sensors10.1016/j.ceramint.2019.12.194 ↗
23. Formation of highly stable dispersions of silane-functionalized reduced graphene oxide10.1016/j.cplett.2010.10.051 ↗
24. Template-free synthesis of SnO2 hollow nanostructures with high lithium storage capacity10.1002/adma.200600733 ↗
25. Hollow and porous ZnSnO3 gas sensor for ethanol gas detection10.1149/2.0281605jes ↗
26. The reduction of graphene oxide10.1016/j.carbon.2011.11.010 ↗
27. Facile synthesis of reduced graphene oxide/hexagonal WO3 nanosheets composites with enhanced H2S sensing properties10.1016/j.snb.2016.02.134 ↗
28. Synthesis of amorphous ZnSnO3-C hollow microcubes as advanced anode materials for lithium ion batteries10.1016/j.electacta.2014.07.095 ↗
29. 3D nitrogen, sulfur-codoped carbon nanomaterial-supported cobalt oxides with polyhedron-like particles grafted onto graphene layers as highly active bicatalysts for oxygen-evolving reactions10.1021/acsami.8b00504 ↗
30. Construction of NiO@ZnSnO3 hierarchical microspheres decorated with NiO nanosheets for formaldehyde sensing10.1016/j.snb.2017.10.176 ↗
31. α-Fe2O3 loaded rGO nanosheets based fast response/recovery CO gas sensor at room temperature10.1016/j.apsusc.2018.09.123 ↗
32. Environmentally friendly recycling of SnO2/Sn3O4 from tin anode slime for application in formaldehyde sensing material by Ag/Ag2O modification10.1016/j.jallcom.2018.06.258 ↗
33. A low temperature operated NO2 gas sensor based on TeO2/SnO2 p–n heterointerface10.1016/j.snb.2012.09.029 ↗
34. Enhanced response characteristics of SnO2 thin film based sensors loaded with Pd clusters for methane detection10.1016/j.snb.2012.02.026 ↗
35. Enhanced gas-sensing performance of GO/TiO2 composite by photocatalysis10.3390/s18103334 ↗
36. Sulfophenyl-Functionalized reduced graphene oxide networks on electrospun 3D scaffold for ultrasensitive NO2 gas sensor10.3390/s17122954 ↗
37. Polyaniline nanostructures and the role of aniline oligomers in their formation10.1016/j.progpolymsci.2010.07.006 ↗
38. Highly sensitive and selective gas sensor using hydrophilic and hydrophobic graphenes10.1038/srep01868 ↗
39. Gas sensitivity of heterojunction TiO2NT/GO materials prepared by a simple method with low-concentration acetone10.1016/j.ceramint.2019.10.288 ↗
40. Ultrasonic spray pyrolysis synthesis of three-dimensional ZnFe2O4-based macroporous spheres for excellent sensitive acetone gas sensor10.1016/j.snb.2019.126755 ↗
41. Facile and simple synthesis of novel iron oxide foam and used as acetone gas sensor with sub-ppm level10.1016/j.jallcom.2019.152406 ↗
42. Hydrothermally synthesized heterostructures of In2O3/MWCNT as acetone gas sensor10.1016/j.sna.2020.112240 ↗
43. In-situ growth of Co3O4 nanoparticles based on electrospray for an acetone gas sensor10.1016/j.jallcom.2020.157234 ↗
44. High-performance acetone gas sensor based on Ru-doped SnO2 nanofibers10.1016/j.snb.2020.128292 ↗
45. Controllable synthesis of hierarchical assembled porous ZnO microspheres for acetone gas sensor10.1016/j.snb.2015.05.054 ↗
46. Acetone gas sensor based on NiO/ZnO hollow spheres: fast response and recovery, and low (ppb) detection limit10.1016/j.jcis.2017.01.106 ↗
47. Facile construction of Co3O4 porous microspheres with enhanced acetone gas sensing performances10.1016/j.mssp.2019.05.014 ↗
48. High triethylamine-sensing properties of NiO/SnO2 hollow sphere P–N heterojunction sensors10.1016/j.snb.2015.03.015 ↗
49. Synthesis of SnO2–CuO heterojunction using electrospinning and application in detecting of CO10.1016/j.snb.2015.11.028 ↗
50. Preparation and gas-sensing performance of GO/SnO2/NiO gas-sensitive composite materials10.1016/j.ceramint.2020.10.257 ↗