journal article·2018-03

Residual stresses in multi-crystalline silicon photovoltaic wafers due to casting and wire sawing

V. Pogue, S.N. Melkote, S. Danyluk

Publisher page

Abstract

Abstract A significant portion of the total manufacturing cost of crystalline silicon solar cells is attributed to the manufacturing and material costs of the silicon wafer. In addition to its high cost, silicon is very brittle, therefore wafers are prone to fracture during handling and processing. In this paper we investigate the manufacturing-induced residual stresses in photovoltaic silicon wafers due to casting and wire-sawing processes which affect the mechanical integrity of the wafers. Specifically, the paper addresses measurement of residual stresses in multi-crystalline silicon (mc-Si) wafers by photoelasticity and polarized micro-Raman spectroscopy methods, as well as the effects of diamond wire sawing and loose abrasive slurry sawing on the residual stresses within the grains and at the grain boundaries. The micro-Raman method probes the residual stresses in the near-surface of the wafer while the photoelasticity technique probes the through-thickness residual stress in the wafers. The results show that diamond wire sawing and loose abrasive slurry wire sawing produce compressive residual stresses in the as-cut mc-Si wafer surface. Loose abrasive slurry wire sawing produces larger compressive stresses in the as-cut surface layers compared to diamond wire sawing. Beneath the saw damage layer in the sawn wafers, low residual tensile stresses are present from the casting process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. G. Cellere, H. Forstner, T. Falcon, Martijn Zwegers, J. Bernreuter, G. Xing, et al., International Technology Roadmap for Photovoltaic (ITRPV) 2015 Results Including Maturity Reports, October 2016 2015.
2. Residual thermal stresses simulation for multi-crystalline silicon casting10.1088/1757-899X/33/1/012059 ↗
3. Infrared birefringence imaging of residual stress and bulk defects in multicrystalline silicon10.1063/1.3468404 ↗
4. Kulshreshtha · 2011
5. Effect of mechanical surface damage on silicon wafer strength10.1016/j.proeng.2011.04.239 ↗
6. Biaxial fracture test of silicon wafers10.1002/adem.200400406 ↗
7. V.A. Popovich, A. Yunus, M. Janssen, I.J. Bennett, I.M. Richardson, Effect of microstructure and processing parameters on mechanical strength of multicrystalline silicon solar cells, in: Proceedings of the 2010 35th IEEE Presented at the Photovoltaic Specialists Conference (PVSC), Honolulu, HI, 2010.10.1109/PVSC.2010.5616046 ↗
8. Comparative analysis of fracture strength of slurry and diamond wire sawn multicrystalline silicon solar wafers10.1002/adem.201200262 ↗
9. V.A. Popovich, J.M. Westra, Van Swaaij, M. Janssen, I.J. Bennett, I.M. Richardson, Raman spectroscopy characterization of residual stress in multicrystalline silicon solar wafers and solar cells; relation to microstructure, defects, and processing conditions, in: Proceedings of the 37th IEEE Presented at Photovoltaic Specialists Conference, PVSC, Seattle, WA, 2011.10.1109/PVSC.2011.6186276 ↗
10. S. Würzner, R. Buchwald, S. Retsch, H. Moller, Investigation of the development of the microcrack structure in scratch tests with single diamond particles on monocrystalline silicon wafers, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition (EUPVSEC), Amsterdam, Netherlands, 2014, pp. 742–746.
11. On the residual stress and fracture strength of crystalline silicon wafers10.1063/1.4776706 ↗
12. Analysis of the sub-surface damage of mc- and cz-Si wafers sawn with diamond-plated wire10.1016/j.egypro.2013.07.363 ↗
13. Mechanical strength of silicon wafers cut by loose abrasive slurry and fixed abrasive diamond wire sawing10.1002/adem.201100263 ↗
14. Correlating internal stresses, electrical activity and defect structure on the micrometer scale in EFG silicon ribbons10.1016/j.solmat.2011.03.039 ↗
15. He · 2005
16. Grain orientation, texture, and internal stress optically evaluated by micro-Raman spectroscopy10.1063/1.2434961 ↗
17. G. Sarau, S. Christiansen, M. Holla, W. Seifert, The effect of internal stresses on the recombination activity of structural defects in multi-crystalline solar silicon, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, Seattle, WA, 2011, pp. 002933–002936.10.1109/PVSC.2011.6186560 ↗
18. G. Sarau, M. Becker, S. Christiansen, M. Holla, W. Seifert, Micro-Raman mapping of residual stresses at grain boundaries in multicrystalline block cast silicon solar cell material: their relation to the grain boundary microstructure and recombination activity, in: Proceedings of the Presented at 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009.
19. The effect of residual stress on photoluminescence in multi-crystalline silicon wafers10.1063/1.4976328 ↗
20. Applied photoelasticity for residual stress measurement inside crystal silicon wafers for solar applications10.1111/str.12185 ↗
21. Anisotropic etching of silicon10.1109/T-ED.1978.19250 ↗
22. Pogue · 2016
23. CRC Materials Science and Engineering Handbook, 3rd ed., CRC Press, Boca Raton, FL, 2000.
24. Optical properties of intrinsic silicon at 300K10.1002/pip.4670030303 ↗
25. Comparison of phase shifting techniques for measuring in-plane residual stress in thin, flat silicon wafers10.1007/s11664-013-2630-z ↗
26. Study of stresses in thin silicon wafers with near-infrared phase stepping photoelasticity10.1557/JMR.2002.0008 ↗
27. T. Zheng, S. Danyluk, Determination of stresses in thin silicon plates with near-infrared phase stepping photoelasticity, in: Proceedings of the 7th ASME NDE Tropical Conference, San Antonio, TX, 2001, pp. 195–199.
28. Danyluk · 2008
29. Analysis and determination of the stress-optic coefficients of thin single crystal silicon samples10.1063/1.1774259 ↗
30. Li · 2010
31. Skenes · 2014
32. K. Skenes, F. Li, S. Danyluk, Analysis of residual stress in thin silicon wafers with an NIR polariscope, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2011.
33. K. Skenes, R.G.R. Prasath, S. Danyluk, Polariscopy measurement of residual stress in thin silicon wafers, in: Conference Proceedings of the Society for Experimental Mechanics Series, Lombard, IL, 2014, pp. 79–85.10.1007/978-3-319-00876-9_10 ↗
34. 3D modelling of stresses and deformations during crystallisation of silicon accounting for ingot-crucible interactions10.1016/j.jcrysgro.2011.10.058 ↗
35. Thermo-mechanical analysis of the ingot–crucible contact during multi-crystalline silicon ingot casting10.1016/j.jcrysgro.2010.10.212 ↗