Eu(III)–BaTiO3 nanoparticles and BaTiO3/TiO2/Ti sheets; photocatalytic and electrocatalytic CO2 reduction
Source abstract
Abstract
Perovskite barium titanate (BaTiO 3 , BTO) has shown a high potential as catalysts. Eu(III) ion has been employed as a unique red-luminescence activator in a host metal oxide. Herein, Eu(III)-doped BTO nanoparticles (NPs) were synthesized, and their photocatalytic CO 2 reduction activities and products were examined. Major CO 2 reduction products were observed to be CH 3OH, CO, and CH 4 . Doped Eu(III) ions were used as a tracer to discuss the roles of dopants by measuring photoluminescence (PL) properties and PL lifetimes. Electrocatalytic CO 2 reduction performances were evaluated using BTO electrodes directly grown on a TiO 2/Ti sheet, and Cu-deposited BTO electrodes. H 2 was a major product and formate was significantly increased upon Cu deposition on the surface. Surface oxidation states of BTO with dopant concentration and overlayer Cu metal were fully discussed by X-ray photoelectron spectroscopy. The surface electronic structure was altered by doping and metal deposition, and thereby the selectivity and productivity for CO 2 reduction were varied. The unique physicochemical properties and CO 2 reduction demonstration tests provide significant information on understanding CO 2 reduction mechanism and the development of BTO-based catalysts for energy and environment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Electronic and Structural Properties of Oxides · Advanced Condensed Matter Physics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Perovskite oxide based materials for energy and environment-oriented photocatalysis10.1021/acscatal.0c02947 ↗
2. A critical review on strategies for improving efficiency of BaTiO3-based photocatalysts for wastewater treatment10.1016/j.jenvman.2021.112679 ↗
3. A review on photocatalytic CO2 reduction using perovskite oxide nanomaterials10.1088/1361-6528/aa9fb1 ↗
4. Perovskite-type oxides as the catalyst precursors for preparing supported metallic nanocatalysts: a review10.1021/acs.iecr.7b03251 ↗
5. Piezotronics enhanced photocatalytic activities of Ag-BaTiO3 plasmonic photocatalysts10.1016/j.jallcom.2019.06.115 ↗
6. In-situ thermal phase transition and structural investigation of ferroelectric tetragonal barium titanate nanopowders with pseudo-cubic phase10.1016/j.chemosphere.2021.131218 ↗
7. Enhanced photocatalytic H2 evolution by plasmonic and piezotronic effects based on periodic Al/BaTiO3 heterostructures10.1016/j.nanoen.2019.05.067 ↗
8. Piezotronic effect enhanced plasmonic photocatalysis by AuNPs/BaTiO3 heterostructures
9. Pivotal role of fluxes in BaTiO3:Eu3+ nano probes for visualization of latent fingerprints on multifaceted substrates and anti-counterfeiting applications10.1016/j.microc.2018.10.020 ↗
10. B-site modified photoferroic Cr3+-doped barium titanate nanoparticles: microwave-assisted hydrothermal synthesis
11. Facile synthesis of nanorods of tetragonal barium titanate using ethylene glycol10.1016/j.ceramint.2014.12.137 ↗
12. Characterization and Rietveld refinement of a-site deficient lanthanum doped barium titanate10.1016/j.jallcom.2013.06.104 ↗
13. Impact of oxygen vacancy occupancy on piezo-catalytic activity of BaTiO3 nanobelt10.1016/j.apcatb.2020.119340 ↗
14. Synthesis of self-modified black BaTiO3−x nanoparticles and effect of oxygen vacancy for the expansion of piezocatalytic application10.1016/j.nanoen.2022.106993 ↗
15. Understanding the electronic properties of BaTiO3 and Er3+ doped BaTiO3 films through confocal scanning microscopy and XPS: the role of oxygen vacancies10.1039/D0CP01010C ↗
16. Comparative studies of nickel doping effects at A and B sites of BaTiO3 ceramics on their crystal structures and dielectric and ferroelectric properties10.1016/j.ceramint.2017.08.169 ↗
17. Crystalline structure, defect chemistry and room temperature colossal permittivity of Nd-doped barium titanate
18. Effect of microwaves on the synthesis, structural and dielectric properties of Ca-modified BaTiO3 ceramics10.1007/s00339-018-1794-z ↗
19. Structure and dielectric characteristics of Ba1-xCaxTi1-xCaxO3-δ ceramics10.1016/j.ceramint.2019.09.072 ↗
20. Correlation between structure, dielectric and multiferroic properties of lead free Ni modified BaTiO3 solid solution10.1016/j.ceramint.2020.07.219 ↗
21. Effect of the occupation of Ba and Ti sites on the structural, optical and dielectric properties of Sm-doped BaTiO3 ceramics10.1007/s10854-018-0454-6 ↗
22. Site-selective symmetries of Eu3+-doped BaTiO3 ceramics: a structural elucidation by optical spectroscopy10.1039/C9TC03987B ↗
23. Electrochemical recovery and behaviors of rare earth (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Yb) ions on Ni sheets10.3390/ma13235314 ↗
24. Photocatalytic and photoelectrocatalytic properties of Eu (III)-doped perovskite SrTiO3 nanoparticles with dopant level approaches10.1016/j.mssp.2021.105919 ↗
25. Difference in the nature of Eu3+ environment in Eu3+-doped BaTiO3 and BaSnO310.1111/jace.12596 ↗
26. Influence of Eu3+-doped BaTiO3 phosphors on structural, optical and photoluminescence properties10.1007/s10854-021-05854-1 ↗
27. Optical characteristics and luminescence of amorphous BaTiO3 thin films doped with Eu3+10.1016/j.jnoncrysol.2020.120515 ↗
28. Improved photoluminescence, thermal stability and temperature sensing performances of K+ incorporated perovskite BaTiO3:Eu3+ red emitting phosphors10.1016/j.ceramint.2017.07.069 ↗
29. Tetragonal BaTiO3 nanoparticles: an efficient photocatalyst for the degradation of organic pollutants10.1016/j.mssp.2016.04.019 ↗
30. Self-doping surface oxygen vacancy-induced lattice strains for enhancing visible light-driven photocatalytic H2 evolution over black TiO210.1021/acsami.1c01101 ↗
31. Three-dimensional porous Cu2O with dendrite for efficient photocatalytic reduction of CO2 under visible light10.1016/j.apsusc.2021.152343 ↗
32. Oxygen vacancy self-doped black TiO2 nanotube arrays by aluminothermic reduction for photocatalytic CO2 reduction under visible light illumination10.1016/j.jcou.2019.09.016 ↗
33. Photocatalytic CO2 reduction over SrTiO3: correlation between surface structure and activity10.1016/j.apsusc.2018.04.049 ↗
34. Improved charge separation and surface activation via boron-doped layered polyhedron SrTiO3 for co-catalyst free photocatalytic CO2 conversion
35. Photoreduction of CO2 on TiO2/SrTiO3 heterojunction network film10.1186/s11671-015-1054-5 ↗
36. Co-embedding oxygen vacancy and copper particles into titanium-based oxides (TiO2, BaTiO3, and SrTiO3) nanoassembly for enhanced CO2 photoreduction through surface/interface synergy10.1016/j.jcis.2022.05.092 ↗
37. Multifunctional photocatalysts of Pt-decorated 3DOM perovskite-type SrTiO3 with enhanced CO2 adsorption and photoelectron enrichment for selective CO2 reduction with H2O to CH410.1016/j.jcat.2019.07.037 ↗
38. Photocatalytic CO2 reduction to methanol over bismuth promoted BaTiO3 perovskite nanoparticle catalysts10.1016/j.renene.2022.06.064 ↗
39. Engineering photocatalytic and photoelectrocatalytic CO2 reduction reactions: mechanisms, intrinsic kinetics, mass transfer resistances, reactors and multi-scale modelling simulations10.1016/j.cej.2020.126799 ↗
40. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
41. Formation of single-crystalline BaTiO3 nanorods from glycolate by tuning the supersaturation conditions10.1016/j.ceramint.2022.01.048 ↗
42. Structural and photoluminescence properties of Eu3+-activated BaTiO3 phosphors10.1016/j.molstruc.2021.131609 ↗
43. Use of Raman spectroscopy to determine the site occupancy of dopants in BaTiO310.1063/1.3592192 ↗
44. Temperature‐dependent Raman spectroscopy of BaTiO3 nanorods synthesized by using a template‐assisted sol–gel procedure10.1002/jrs.4206 ↗
45. Well-designed 2D/2D Ti3C2TA/R MXene coupled g-C3N4 heterojunction with in-situ growth of anatase/rutile TiO2 nucleates to boost photocatalytic dry-reforming of methane (DRM) for syngas production under visible light10.1016/j.apcatb.2020.119777 ↗
46. Ultraviolet and infrared light decontamination and the secondary pollution products of G-series nerve agent simulant model molecules contaminating TiO2/Ti surfaces10.1016/j.jiec.2021.05.039 ↗
47. Raman spectra of titanium dioxide (anatase, rutile) with identified oxygen isotopes (16, 17, 18)10.1039/c2cp42763j ↗
48. Rutile-coated B-phase TiO2 heterojunction nanobelts for photocatalytic H2 evolution10.1021/acsanm.0c02263 ↗
49. CO2 reduction by photocatalytic and photoelectrocatalytic approaches over Eu(III)-ZnGa2O4 nanoparticles and Eu(III)-ZnGa2O4/ZnO nanorods10.1016/j.jcou.2022.101994 ↗
50. Photocatalytic CO2 reduction and hydrogen production over Pt/Zn-embedded β-Ga2O3 nanorods10.1016/j.apsusc.2020.147753 ↗
51. UV light decontamination and secondary pollution products of G-series chemical warfare model molecules contaminated on Mo and MoOx surfaces10.1016/j.apsusc.2021.150502 ↗
52. Recent progress and perspectives in the photocatalytic CO2 reduction of Ti-oxide-based nanomaterials10.1016/j.apsusc.2016.11.240 ↗
53. Photoelectrochemical CO2 reduction products over sandwiched hybrid Ga2O3: ZnO/Indium/ZnO nanorods10.3389/fchem.2022.814766 ↗
54. Full characterization of Eu(OH)3 and Eu2O3 nanorods10.1016/j.apsusc.2014.06.165 ↗
55. X-ray micro computed tomography and efficient electrochemical recovery of lanthanides on porous carbon cylinder electrodes10.1016/j.compositesb.2021.109590 ↗
56. Oxidation processes at the surface of BaTiO3 thin films under environmental conditions10.1016/j.apsusc.2021.150288 ↗
57. Naumkin · 2012
58. Method for estimating ionicities of oxides using O 1s photoelectron spectra10.1063/1.4931996 ↗
59. Interaction of graphene oxide with barium titanate in composite: XPS and DFT studies10.1016/j.jallcom.2020.155747 ↗
60. Modification of BaTiO3 thin films: adjustment of the effective surface work function10.1039/b706949a ↗
61. Band offsets at heterojunctions between SrTiO3 and BaTiO3 and Si(100)10.1063/1.1766417 ↗
62. Enhanced clustering tendency of Cu-impurities with a number of oxygen vacancies in heavy carbon-loaded TiO2-the bulk and surface morphologies10.1016/j.solidstatesciences.2017.07.013 ↗
63. Anomalous oxidation resistance of “core-only” copper nanoparticles electrochemically grown on gold nanoislands prefunctionalized by 1, 4-phenylene diisocyanide10.1149/2.006205esl ↗
64. The electromechanical behavior of europium doped BaTiO310.1016/j.jallcom.2017.07.090 ↗