Analytical modeling of the stress field in scratching anisotropic single-crystal silicon
Source abstract
Abstract
Single-crystal silicon is widely used in semiconductor and photovoltaic industries. However, the hard and brittle single-crystal silicon is highly susceptible to surface or sub-surface damage such as median cracks, radial cracks and lateral cracks during machining, which will affect the quality of the machined surface. This paper proposes an analytical model of the stress field in scratching single-crystal silicon to analyze the crack driving stress. An analysis of the anisotropic properties of single-crystal silicon and the factual location of the inelastic zone center is presented. In order to simplify the scratching process, the scratching-induced embedded center of dilatation (ECD) stress field is deducted based on the ECD stress field and the superposition principle. The stress field in the scratching single-crystal silicon (100) crystal surface was calculated to analyze the effect of the scratching stress field on crack nucleation. The normal load was found to be the main stress driving the nucleation and expansion of the median crack. The nucleation extension angle of the median crack decreases as the equivalent half-angle of the indenter increases. Scratching the single-crystal silicon (100) crystal surface in the [00–1] direction reduces subsurface median crack damage. Indenter depth increases residual stress, which can increase brittle removal of the material, resulting in the nucleation of the median crack. This study can provide a theoretical basis for refining the parameters of the scratching process and controlling the surface damage in scratching hard and brittle crystalline materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. VDMA · 2021 · vol. 12
2. Analytical modeling of grinding-induced subsurface damage in monocrystalline silicon10.1016/j.matdes.2017.05.068 ↗
3. Formation of subsurface cracks in silicon wafers by grinding10.1016/j.npe.2018.09.003 ↗
4. Burghartz · 2011
5. Effects of crystal orientation on the crack propagation of sapphire by sequential indentation testing10.3390/cryst8010003 ↗
6. Plastically deformed region around indentations on Si single crystal10.1063/1.357957 ↗
7. Hill · 1998
8. Elastic stress fields caused by indenting brittle materials10.1080/01418618208236917 ↗
9. Polarized Raman spectroscopy clarifies the effect of crystal anisotropy on elastic stress fields developed on the surface of silicon single-crystal10.1002/pssa.201000006 ↗
10. Direct observation and analysis of indentation cracking in glasses and ceramics10.1111/j.1151-2916.1990.tb05119.x ↗
11. An analytical expression for the stress field around an elastoplastic indentation/contact10.1016/j.actamat.2006.12.030 ↗
12. A quantitative analysis for the stress field around an elastoplastic indentation/contact10.1557/jmr.2009.0097 ↗
13. Sliding microindentation fracture of brittle materials: role of elastic stress fields10.1016/S0167-6636(98)00012-X ↗
14. A new analytical model for estimation of scratch-induced damage in brittle solids10.1111/j.1551-2916.2006.01471.x ↗
15. Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching10.1016/j.ceramint.2017.05.054 ↗
16. Stress analysis in scratching of anisotropic single-crystal silicon carbide10.1016/j.ijmecsci.2018.03.042 ↗
17. Study on nucleation and propagation of median cracks generated by scratching single crystal silicon10.1016/j.mssp.2019.104691 ↗
18. An analytical model for estimation of the stress field and cracks caused by scratching anisotropic single crystal gallium nitride10.1016/j.mssp.2020.105446 ↗
19. Mechanical deformation in silicon by micro-indentation10.1557/JMR.2001.0209 ↗
20. Elastic recovery of conical indentations10.1088/0370-1328/78/2/302 ↗
21. An elastic-plastic-cracking model for finite element analysis of indentation cracking in brittle materials10.1016/S0020-7683(00)00406-6 ↗
22. Analytical models of scratch hardness10.1016/0301-679X(96)00014-X ↗
23. Investigation on residual scratch depth and material removal rate of scratching machining single crystal silicon with Berkovich indenter10.1016/j.mssp.2019.04.037 ↗
24. Modelling of ceramic grinding processes Part I. Number of cutting points and grinding forces per grit10.1016/0924-0136(95)02232-5 ↗
25. Residual stress effects in sharp contact cracking10.1007/BF00551043 ↗
26. Mechanical modelling of indentation-induced densification in amorphous silica10.1016/j.actamat.2008.03.010 ↗
27. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
28. Elastostatic Green's function for advanced materials subject to surface loading10.1023/B:ENGI.0000031191.64358.a8 ↗
29. Displacement field of a point force acting on the surface of an elastically anisotropic half-space10.1088/0305-4470/27/23/033 ↗
30. Influence of single diamond wire sawing of photovoltaic monocrystalline silicon on the feed force, surface roughness and micro-crack depth10.1016/j.mssp.2022.106525 ↗
31. Towards understanding the brittle–ductile transition in the extreme manufacturing10.1088/2631-7990/abdfd7 ↗
32. Understanding the effect of surface flaws on the strength distribution of brittle single crystals10.1111/jace.15800 ↗
33. Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals10.1016/j.matdes.2018.04.082 ↗
34. Ideal strength of silicon: an ab initio study10.1103/PhysRevB.74.235203 ↗
35. Fracture toughness of silicon in nanometer-scale singular stress field10.1016/j.engfracmech.2015.05.054 ↗
36. Investigations on brittle-ductile cutting transition and crack formation in diamond cutting of mono-crystalline silicon10.1007/s00170-017-1108-1 ↗
37. Crystallographic effect on subsurface damage formation in silicon microcutting10.1016/j.cirp.2012.03.070 ↗
38. Surface damage and mechanical strength of silicon wafers10.1002/pssc.201400227 ↗
39. Analytical model to determine the critical feed per edge for ductile–brittle transition in milling process of brittle materials10.1016/j.ijmachtools.2010.12.003 ↗
40. Computationally efficient representation for elastostatic and elastodynamic Green's functions for anisotropic solids10.1103/PhysRevB.51.15695 ↗
41. Chaves · 2013
42. What is the young's modulus of silicon?10.1109/JMEMS.2009.2039697 ↗
43. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
44. Electronic effects in the elastic constants of n-type silicon10.1103/PhysRev.161.756 ↗