Hydrothermal temperature effect on the growth of h-MoO3 thin films using seed layers and their photoluminescence properties
Source abstract
Abstract
Abstract In this work, thin films of molybdenum trioxide were successfully deposited via the facile and cost-effective hydrothermal technique. The films were grown at different temperatures of 50, 80, 110, and 130 °C on glass substrates. The growth temperature effects on the optical, morphological, and structural properties of samples were studied. X-ray diffraction (XRD) pattern analysis and Raman spectroscopy revealed that all deposited MoO3 thin films were crystallized in a hexagonal crystal structure. Field emission scanning electron microscope (FESEM) images exhibited that MoO3 thin films were coated by well-shaped hexagonal micro-rods. Also, the diameter of the micro-rods was decreased from 8.95 to 3.60 μm by increasing the hydrothermal growth temperature. At 130 °C, micro-rods were accumulated in the form of micro-flowers. By increasing the growth temperature, the estimated optical bandgap of films was increased from 2.94 to 3.04 eV, respectively. All h-MoO3 fabricated thin films showed photoluminescence (PL) emission at room temperature, and increasing the growth temperature caused the enhancement of the PL intensity. This study provides a simple and low-cost synthesis route at low temperatures to deposit h-MoO3 films for further investigations as in gas sensing and optoelectronic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Substrate temperature induced effect on microstructure, optical and photocatalytic activity of ultrasonic spray pyrolysis deposited MoO3 thin films10.1088/2053-1591/ab0f7a ↗
2. One-dimensional growth of hexagonal rods of metastable h-MoO3 using one-pot, rapid and environmentally benign supercritical fluid processing10.1016/j.physe.2018.02.001 ↗
3. TiO2/GO nanocomposites: synthesis, characterization, and DSSC application10.1140/epjp/s13360-020-00739-4 ↗
4. Aqueous synthesis of interconnected ZnO nanowires using spray pyrolysis deposited seed layers10.1016/j.matlet.2009.10.065 ↗
5. Synthesis of wormlike α-Fe2O3 nanostructure: characterization and antibacterial application10.1007/s11664-020-08351-z ↗
6. Hydrogen sensors based on 2D WO3 nanosheets prepared by anodization10.1016/j.snb.2017.05.029 ↗
7. Rapid augmentation of vertically aligned MoO 3 nanorods via microwave irradiation10.1039/C7CE01531C ↗
8. α-MoO 3-C composite as counter electrode for quantum dot sensitized solar cells10.1016/j.solmat.2016.11.035 ↗
9. Structural and optical properties of sol-gel synthesized h-MoO3 nanorods treated by gamma radiation10.1088/2632-959X/aba4f8 ↗
10. Facile synthesis, characterization, and photoluminescence of lamellar α-MoO3 thin films10.1016/j.solidstatesciences.2019.05.022 ↗
11. Structural optical magnetic properties of Co doped α-MoO3 sprayed thin films10.1016/j.sna.2016.11.032 ↗
12. Molybdenum oxide nanosheets prepared by an anodizing-exfoliation process and observation of photochromic properties10.1016/j.apsusc.2016.11.225 ↗
13. Effects of precipitation temperature on the photochromic properties of h-MoO310.1016/j.ceramint.2014.05.076 ↗
14. Rejuvenation of degraded electrochromic MoO3 thin films made by DC magnetron sputtering: preliminary results
15. Robust wire-based supercapacitors based on hierarchical α-MoO 3 nanosheet arrays with well-aligned laminated structure10.1016/j.cej.2017.03.041 ↗
16. New Li-ion battery full-cells: MoO3 nanobelts as high energy density electrode10.1088/2053-1591/ab122b ↗
17. Orthorhombic MoO3 nanobelts based NO2 gas sensor10.1016/j.apsusc.2017.02.055 ↗
18. Gas sensing properties of thermally evaporated lamellar MoO310.1016/j.snb.2009.11.007 ↗
19. Synthesis and ethanol sensing characteristics of nanostructured MoO3:Zn thin films10.1142/S0218625X18500464 ↗
20. Gas sensing and structural properties of a nano-structure MoO3-based hydrogen sensor
21. Au-loaded hierarchical MoO3 hollow spheres with enhanced gas-sensing performance for the detection of BTX (benzene, toluene, and xylene) and the sensing mechanism10.1021/acsami.6b11754 ↗
22. Studying the effect of MoO3 in hole-conductor-free perovskite solar cells10.1021/acsenergylett.8b01169 ↗
23. h-MoO 3 phase transformation by four thermal analysis techniques10.1007/s10973-019-08842-0 ↗
24. Crystal phase-and morphology-controlled synthesis of MoO 3 materials10.1039/C6CE02437H ↗
25. formation of one-dimensional hierarchical MoO 3 nanostructures under hydrothermal conditions10.1134/S003602362004018X ↗
26. Role of synthesis variables on controlled nucleation and growth of hexagonal molybdenum oxide nanocrystals: investigation on thermal and optical properties10.1039/C4CE00418C ↗
27. Enhanced photocatalytic activity of amorphous MoO3 thin films deposited by rf reactive magnetron sputtering10.1016/j.cattod.2018.04.065 ↗
28. Synthesis of the few layered two-dimensional molybdenum oxide atomic crystal
29. The dielectric studies on sol–gel routed molybdenum oxide thin film10.1142/S2010135X17500114 ↗
30. h-MoO3 microrods grown on wood substrates through a low-temperature hydrothermal route and their optical properties
31. Thin film growth and Zn doping of h-MoO3 hexagonal rods by hydrothermal technique10.1142/S0217984916504248 ↗
32. Hydrothermally synthesized h-MoO3 and α-MoO3 nanocrystals: new findings on crystal-structure-dependent charge transport10.1021/acs.cgd.5b01571 ↗
33. Nano MoO3 phase structural evolution during hydrothermal synthesis and its electrochemical properties10.20964/2017.03.15 ↗
34. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
35. The Scherrer equation versus the 'Debye-Scherrer equation10.1038/nnano.2011.145 ↗
36. The effect of growth temperature on the characteristics of ZnO Nanorods and its optical properties
37. Structural and electrochemical properties of spray deposited molybdenum trioxide (α-MoO3) thin films10.1007/s10008-017-3540-4 ↗
38. The effect of air annealing on the properties of MoO3 films and its application for organic light emitting diodes10.7567/JJAP.57.03DA04 ↗
39. Characterization of hierarchical α-MoO 3 plates toward resistive heating synthesis: electrochemical activity of α-MoO 3/Pt modified electrode toward methanol oxidation in neutral pH10.1088/1361-6528/aa67c9 ↗
40. Alteration of architecture of MoO3 nanostructures on arbitrary substrates: growth kinetics, spectroscopic and gas sensing properties10.1039/C4NR04529G ↗
41. Effect of temperature and concentration of precursors on morphology and photocatalytic activity of zinc oxide thin films prepared by hydrothermal route
42. Influence of growth time and temperature on the morphology of ZnO nanorods via hydrothermal
43. Growth of novel α-MoO3 hierarchical nanostructured thin films for ethanol sensing10.1016/j.mssp.2020.105263 ↗
44. Effect of pH variation on structural and optical properties of Zn 0.95 Co 0.05 O nanoparticles10.1016/j.jlumin.2014.12.024 ↗
45. The evolution of the Mo5+ oxidation state in the thermochromic effect of MoO3 thin films deposited by rf magnetron sputtering10.1016/j.jallcom.2017.06.149 ↗
46. A study of the optical bandgap energy and Urbach tail of spray-deposited CdS: in thin films10.1016/j.jmrt.2013.02.012 ↗
47. Progression of reduction of MoO3 observed in powders and solution-processed films10.1016/j.tsf.2017.02.029 ↗
48. Metastable h-MoO3 and stable α-MoO3 microstructures: controllable synthesis, growth mechanism and their enhanced photocatalytic activity10.1080/17458080.2015.1012654 ↗