journal article·2023-07

A direct correlation between structural and morphological defects of TiO2 thin films on FTO substrates and photovoltaic performance of planar perovskite solar cells

Mario A. Millán-Franco, Carlos A. Rodríguez-Castañeda, Paola M. Moreno-Romero, Jhon Jairo Prias-Barragán, Oscar A. Jaramillo-Quintero, Hailin Hu

Publisher page

Abstract

Titanium oxide (TiO 2 ) precursor is often deposited on conductive fluorine doped tin oxide (FTO) to convert into crystalline anatase phase after a thermal annealing at 400–550 °C. A higher annealing temperature can increase the crystallinity of TiO 2, but it may also induce morphological changes in both TiO 2 and FTO. In this work, structural and morphological changes in thermally annealed FTO and TiO 2 /FTO are identified and semi-quantified by X-ray diffraction, scanning electron and atomic force microscopies. 400 °C annealed TiO 2 shows the lowest crystallinity and the highest dislocation density, giving a poor photovoltaic performance of planar perovskite solar cells ( p-PSCs). 550 °C annealed TiO 2 exhibits the highest crystallinity and lowest dislocation density, but at such temperature the FTO films undergo an increase of surface roughness by more than 25%. As a result, 550 °C annealed TiO 2 coatings on FTO substrates show the highest concentration of surface fracture and a larger exposed area of FTO, permitting a direct contact of upcoming perovskite with the FTO substrate. TiO 2 thin films annealed at 450 or 500 °C show a compromising between the crystalline structure and defect density, giving a better energy conversion efficiency of 16.3% of p-PSCs prepared under ambient conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A Perspective on perovskite solar cells: emergence , progress , and commercialization
2. Perovskite solar cells : materials, configurations and stability10.1016/j.rser.2017.09.011 ↗
3. Advances in modelling and simulation of halide perovskites for solar cell applications
4. Klaus · 2014
5. Solar cell efficiency tables (version 59)10.1002/pip.3506 ↗
6. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
7. Recent progress in organohalide lead perovskites for photovoltaic and optoelectronic applications10.1016/j.ccr.2017.10.021 ↗
8. Time-temperature-transformation (TTT) diagrams for crystallization of metal oxide thin films10.1002/adfm.201000377 ↗
9. Affendi · 2014 · 400
10. Sarah · 2010 · 361
11. High temperature stable anatase phase titanium dioxide films synthesized by mist chemical vapor deposition10.3390/nano10050911 ↗
12. Effect of annealing temperature of titanium dioxide thin films on structural and electrical properties
13. Facile solution spin-coating SnO2 thin film covering cracks of TiO2 hole blocking layer for perovskite solar cells10.3390/coatings8090314 ↗
14. Fabrication of nanocrystalline TiO2 thin films using Sol-Gel spin coating technology and investigation of its structural, morphology and optical characteristics10.1016/j.apsusc.2022.153226 ↗
15. Thermal evaporation−oxidation deposited aluminum oxide as an interfacial modifier to improve the performance and stability of zinc oxide-based planar perovskite solar cells10.1021/acsaem.0c01106 ↗
16. X-ray line broadening in metals10.1088/0370-1298/62/11/110 ↗
17. III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray Debye-Scherrer spectrum10.1080/14786435608238074 ↗
18. Characterization of mechanically alloyed nanocrystalline Fe(Al): crystallite size and dislocation density
19. Estimation of crystallite size, lattice strain and dislocation density of nanocrystalline carbonate substituted hydroxyapatite by X-ray peak variance analysis10.1016/j.mspro.2014.07.260 ↗
20. Warren · 1968
21. X-ray diffraction line profile analysis of KBr thin films10.1007/s00339-016-0293-3 ↗
22. X-Ray diffraction line profile analysis of undoped and Se-doped SnS thin films using Scherrer's, Williamson–Hall and size–strain plot methods10.1007/s11664-018-6791-7 ↗
23. Barabási · 1995
24. Gwyddion: an open-source software for SPM data analysis
25. Statistical study of AFM images on manganite thin films10.1002/pssc.200304912 ↗
26. Synthetic data in quantitative scanning probe microscopy10.3390/nano11071746 ↗
27. Roughness and structural modification of PbI2 thin films by isopropanol treatment to improve methylammonium lead halide formation and solar cell efficiency10.1007/s10854-019-02100-7 ↗
28. Zhao · 2001
29. Cellulose acetate fibers covered by CdS nanoparticles for hybrid solar cell applications10.1016/j.mseb.2012.02.014 ↗
30. Unveiling the electronic structure nature of twisted hybrid perovskites for solar cell applications: a combined experimental and theoretical study10.1016/j.solener.2021.08.072 ↗
31. Voltage scanning speed Determination and current-voltage curves of different types of perovskite solar cells10.1109/JPHOTOV.2022.3143459 ↗
32. Structure and optical properties of TiO 2 thin films prepared by pulsed laser deposition
33. Luis · 1973
34. Weatherability of Cu2ZnSnSe4 thin film solar cells on diverse substrates10.1016/j.solener.2019.11.089 ↗
35. Development of tempered-glass substrates with TCO films for a-Si solar cells10.1016/S0927-0248(97)00183-9 ↗
36. How contact layers control shunting losses from pinholes in thin-film solar cells10.1021/acs.jpcc.8b09400 ↗
37. Askeland · 2016
38. Mechanical properties and corrosion behaviour of nanocrystalline Ti-5Ta-1.8Nb alloy produced by cryo-rolling10.1016/j.msea.2014.08.016 ↗
39. Atomic-scale investigation on the evolution of TiO2-anatase prepared by a sonochemical route and treated with NaOH10.3390/ma13030685 ↗
40. Understanding the rate-dependent J–V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field10.1039/C4EE03664F ↗
41. Characterization of surface states by SPV-transient10.1016/j.apsusc.2008.07.008 ↗
42. Interfacial engineering by non-toxic graphene-based nanoribbons for improved performance of planar Sb2S3 solar cells10.1016/j.apsusc.2020.146705 ↗