journal article·2020-03

All-inorganic, hole-transporting-layer-free, carbon-based CsPbIBr2 planar perovskite solar cells by a two-step temperature-control annealing process

Cheng Wang, Junsen Zhang, Jipeng Duan, Li Gong, Jie Wu, Liangxiang Jiang, Conghua Zhou, Haipeng Xie, Yongli Gao, Haiping He, Jianguo Lu, Zhishan Fang, Bojing Lu

Publisher page

Abstract

Abstract In this paper, all-inorganic CsPbIBr2 thin films were annealed by a two-step temperature-control process. All-inorganic, hole-transporting-layer-free, carbon-based planar perovskite solar cells (PSCs) with these CsPbIBr2 thin films (FTO/c-TiO2/CsPbIBr2/C) were fabricated. The effect of different first-step annealing temperatures during the two-step temperature-control process (50 °C/280 °C, 80 °C/280 °C, 100 °C/280 °C, 150 °C/280 °C, 180 °C/280 °C) on the photovoltaic conversion efficiency (PCE) of PSCs was investigated for the first time. When the first-step annealing temperature was 150 °C and the second-step annealing temperature was 280 °C, the highest efficiency of 8.31% was obtained. Without encapsulation, the solar cell could retain 97% of the initial PCE, when it was stored at 80 °C and zero humidity for 8 days. For comparison, solar cells with CsPbIBr2 films annealed by a one-step temperature-control process were fabricated. The highest PCE was 4.98%. From this, we could see that there is an increase of 66.9% in PCE, through using a two-step temperature-control annealing process. And also, in order to investigate why the PSCs by a two-step temperature-control annealing process has a higher PCE, all kinds of measurements were done for the first time. According to the results of the measurements, the perovskite film annealed by a two-step temperature-control process has a bigger crystal size, fewer grain boundaries, stronger PL and UV–vis absorption intensities, longer lifetime of minority carriers, less energy loss for hole transporting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Progress, challenges and perspectives in flexible perovskite solar cells10.1039/C6EE01137C ↗
2. Characterization and electrochemical performance of lithium-active titanium dioxide inlaid LiNi0.5Co0.2Mn0.3O2 material prepared by lithium residue-assisted method10.1016/j.jallcom.2015.03.071 ↗
3. Highly crystalline alumina surface coating from hydrolysis of aluminum isopropoxide on lithium-rich layered oxide10.1016/j.jpowsour.2015.02.019 ↗
4. A metal-organic framework-derived bifunctional catalyst for hybrid sodium-air batteries10.1016/j.apcatb.2018.09.063 ↗
5. A liquid anode for rechargeable sodium-air batteries with low voltage gap and high safety10.1016/j.nanoen.2018.04.074 ↗
6. Dual-phase spinel MnCo2O4 nanocrystals with nitrogen-doped reduced graphene oxide as potential catalyst for hybrid Na-air batteries10.1016/j.electacta.2017.05.100 ↗
7. Preparation and photocatalytic performance of graphene Oxide/WO3 quantum Dots/TiO2@SiO2 microspheres10.1016/j.vacuum.2019.03.002 ↗
8. Low-temperature synthesis and sunlight-catalytic performance of flower-like hierarchical graphene oxide/ZnO macrosphere10.1007/s11051-018-4392-2 ↗
9. Highly efficient photocatalytic performance of graphene oxide/TiO2-Bi2O3 hybrid coating for organic dyes and NO gas10.1007/s10854-015-2844-3 ↗
10. Prediction of thermal and electrical behavior of silicon rod for a 48-rod Siemens reactor by direct current power10.1016/j.icheatmasstransfer.2017.09.004 ↗
11. Recent advances of flexible hybrid perovskite solar cells10.3938/jkps.71.593 ↗
12. High efficiency silicon solar cells
13. Amorphous silicon solar cell10.1063/1.88617 ↗
14. Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact10.1038/am.2017.103 ↗
15. Nanoscale microstructure and chemistry of Cu2ZnSnS4/CdS interface in kesterite Cu2ZnSnS4 solar cells10.1002/aenm.201600706 ↗
16. Back contact-absorber interface modification by inserting carbon intermediate layer and conversion efficiency improvement in Cu2ZnSn(S,Se)4 solar cell10.1002/pssr.201510280 ↗
17. Thin-film CdS/CdTe solar cell with 15.8% efficiency10.1063/1.109629 ↗
18. Study on the thermal stability of Ga-doped ZnO thin film: a transparent conductive layer for dye-sensitized TiO2 nanoparticles based solar cells10.1016/j.mssp.2014.05.016 ↗
19. Intermolecular exchange boosts efficiency of air-stable, carbon-based all-inorganic planar CsPbIBr2 perovskite solar cells to over 9%10.1002/aenm.201802080 ↗
20. Dependence of power conversion properties of perovskite solar cells on operating10.1063/1.5041028 ↗
21. Progress in air-processed perovskite solar cells: from crystallization to photovoltaic performance10.1039/C9MH00325H ↗
22. Light-induced lattice expansion leads to high-efficiency perovskite solar cells10.1126/science.aap8671 ↗
23. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
24. Bismuth based hybrid perovskites A3Bi2I9 (A: methylammonium or cesium) for solar cell application10.1002/adma.201501978 ↗
25. A-site cation in inorganic A3Sb2I9 perovskite influences structural dimensionality, exciton binding energy, and solar cell performance10.1021/acs.chemmater.8b00676 ↗
26. Cesium titanium(IV) bromide thin films based stable lead-free perovskite solar cells10.1016/j.joule.2018.01.009 ↗
27. Stabilization of α-CsPbI3 in ambient room temperature conditions by incorporating Eu into CsPbI310.1021/acs.chemmater.8b01808 ↗
28. Lanthanide ions doped CsPbBr3 halides for HTM-free 10.14%-efficiency inorganic perovskite solar cell with an ultrahigh open-circuit voltage of 1.594 V10.1002/aenm.201802346 ↗
29. All-inorganic perovskite solar cells10.1021/jacs.6b10227 ↗
30. All-inorganic CsPbI2Br perovskite solar cells with high efficiency exceeding 13%10.1021/jacs.7b13229 ↗
31. Ultra-thin MoOx as cathode buffer layer for the improvement of all-inorganic CsPbIBr2 perovskite solar cells10.1016/j.nanoen.2017.08.048 ↗
32. Aged precursor solution toward low-temperature fabrication of efficient carbon-based all-inorganic planar CsPbIBr2 perovskite solar cells10.1021/acsaem.8b00972 ↗
33. Influence of charge transport layers on open-circuit voltage and hysteresis in perovskite solar cells10.1016/j.joule.2018.02.013 ↗
34. Long-range balanced electron and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
35. Dependence of power conversion properties of hole-conductor-free mesoscopic perovskite solar cells on the loading of perovskite crystallites10.1016/j.orgel.2018.06.054 ↗
36. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability10.1126/science.1254763 ↗
37. Critical parameters in TiO2/ZrO2/Carbon-based mesoscopic perovskite solar cell10.1016/j.jpowsour.2015.05.106 ↗
38. A contact study in hole conductor free perovskite solar cells with low temperature processed carbon electrodes10.1039/C7RA00066A ↗
39. Accelerated hole-extraction in carbon-electrode based planar perovskite solar cells by moisture-assisted post-annealing10.1063/1.5087098 ↗
40. Challenges for commercializing perovskite solar cells10.1126/science.aat8235 ↗
41. Room-temperature deposition of flexible transparent conductive Ga-doped ZnO thin films by magnetron sputtering on polymer Substrates10.1007/s10854-016-6286-3 ↗
42. Study on the structural, electrical, optical, adhesive properties and stability of Ga-doped ZnO transparent conductive films deposited on polymer substrates at room temperature10.1007/s10854-012-0969-1 ↗
43. Study on the adhesion force between Ga-doped ZnO thin films and polymer substrates10.1166/jnn.2019.16451 ↗
44. Enhancing optical, electronic, crystalline, and morphological properties of cesium lead halide by Mn substitution for high-stability all-inorganic perovskite solar cells with carbon electrodes10.1002/aenm.201800504 ↗
45. CsPb0.9Sn0.1IBr2 based all-inorganic perovskite solar cells with exceptional efficiency and stability10.1021/jacs.7b07949 ↗
46. Simplified perovskite solar cell with 4.1% efficiency employing inorganic CsPbBr3 as light absorber10.1002/smll.201704443 ↗
47. Light processing enables efficient carbon-based, all-inorganic planar CsPbIBr2 solar cells with high photovoltages10.1021/acsami.8b17839 ↗