journal article·2021-05

Fabrication of thin resin-bonded diamond wire and its application to ductile-mode wire sawing of mono-crystalline silicon

Mengran Ge, Peizhi Wang, Wenbo Bi, Peiqi Ge

Publisher page

Abstract

Abstract Fixed diamond wire has been the most common tool for slicing semiconductor ingots into wafers in fields of photovoltaics and integrated circuits. The diameter of diamond wire and thickness of wafers are decreasing dramatically to reduce material cost. Compared with electroplated diamond wire, resin-bonded diamond wire has a more uniform distribution of protrusion height, which leads to less crack damage, and therefore ensures further thinning of wafer thickness. However, due to the restriction of materials and resin-bonded diamond wire fabrication technology, the application of resin-bonded diamond wire is still limited. In this paper, thin resin-bonded diamond wire with core wire diameter of 60 μm is developed using a self-developed wire-fabricating device, and its corresponding morphology and sawing performance are evaluated. The examined quality of sawn wafers indicates that the thin resin-bonded diamond wire meets the requirement of wire sawing. Besides, a 3D morphology model for the thin wire is established considering the uniform distribution of protrusion height of abrasives. Wire sawing parameters to realize ductile-mode wire sawing of mono-crystalline silicon are determined using the established 3D morphology model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Diamond wire sawing of solar silicon wafers: a sustainable manufacturing alternative to loose abrasive slurry sawing
2. An experimental research on the force and energy during the sapphire sawing using reciprocating electroplated diamond wire saw10.1115/1.4038109 ↗
3. 2019
4. Mechanical strength problem of thin silicon wafers (120 and 140 μm) cut with thinner diamond wires (Si kerf 120→100 μm) for photovoltaic use10.1016/j.mssp.2020.105209 ↗
5. Ultra-thin wafer technology and applications: a review10.1016/j.mssp.2019.104681 ↗
6. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
7. Wire sawing technology: a state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
8. Ductile-regime grinding: a new technology for machining brittle materials
9. Deformation and removal characteristics in nanoscratching of 6H-SiC with Berkovich indenter10.1016/j.mssp.2014.11.034 ↗
10. Suppressing scratch-induced brittle fracture in silicon by geometric design modification of the abrasive grits10.1016/j.jmrt.2018.05.016 ↗
11. Effect of grit shape and crystal structure on damage in diamond wire scribing of silicon10.1111/jace.14732 ↗
12. Influence of strain rate effect on material removal and deformation mechanism based on ductile nanoscratch tests of Lu2O3 single crystal10.1016/j.ceramint.2018.08.210 ↗
13. Evaluation of fixed abrasive diamond wire sawing induced subsurface damage of solar silicon wafers10.1016/j.jmatprotec.2019.116267 ↗
14. A fracture mechanics approach to enhance product and process sustainability in diamond wire sawing of silicon wafers for solar cells through improved wire design
15. High-precision mechanical polishing method for diamond substrate using micron-sized diamond abrasive grains10.1016/j.diamond.2019.107644 ↗
16. A comparative study on the material removal mechanisms of 6H-SiC polished by semi-fixed and fixed diamond abrasive tools10.1016/j.wear.2016.01.014 ↗
17. A comparison of wafers sawn by resin bonded and electroplated diamond wire—from wafer to cell10.1109/PVSC.2013.6744204 ↗
18. Subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing10.1016/j.mssp.2016.10.021 ↗
19. Effect of wear of diamond wire on surface morphology, roughness and subsurface damage of silicon wafers10.1016/j.wear.2016.07.009 ↗
20. Wear of diamond in scribing of multi-crystalline silicon10.1063/1.5037106 ↗
21. Experimental investigation of tool wear in electroplated diamond wire sawing of silicon10.1016/j.procir.2018.09.038 ↗
22. Development of the manufacture equipment for resin bonded diamond abrasive wire saw10.4028/www.scientific.net/AMR.588-589.1694 ↗
23. Fabrication and performance evaluation for resin-bonded diamond wire saw10.1007/s00170-018-2454-3 ↗
24. Formation mechanism of wire bow and its influence on diamond wire saw process and wire cutting capability10.1016/j.ijmecsci.2020.105851 ↗
25. The chemo-mechanical effect of cutting fluid on material removal in diamond scribing of silicon10.1063/1.4991536 ↗
26. Three-dimensional shape modeling of diamond abrasive grains measured by a scanning laser microscope10.4028/www.scientific.net/KEM.238-239.131 ↗
27. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
28. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments10.1016/j.mssp.2017.10.027 ↗
29. Distribution of diamond grains in fixed abrasive wire sawing process10.1007/s00170-014-5782-y ↗
30. Investigation on residual scratch depth and material removal rate of scratching machining single crystal silicon with Berkovich indenter10.1016/j.mssp.2019.04.037 ↗
31. Elastic/plastic indentation damage in ceramics: the lateral crack system10.1111/j.1151-2916.1982.tb10782.x ↗