journal article·2019-02

A simulation study of valence band offset engineering at the perovskite/Cu2ZnSn(Se1-xSx)4 interface for enhanced performance

Nian Cheng, Weiwei Li, Shujie Sun, Zhiqiang Zhao, Zhenyu Xiao, Zhuzhu Sun, Wei Zi, Liang Fang

Publisher page

Abstract

Abstract Proper valence band offset at the perovskite/hole transport material interface is critical to obtain high performance perovskite solar cells. The Cu2ZnSn(Se1-xSx)4 compound is a potential candidate of hole transport material for perovskite solar cells and exhibits tunable band gap from 0.95 eV for Cu2ZnSnSe4 to 1.5 eV for Cu2ZnSnS4 with different S/(S+Se) ratio, which offers a feasible approach to engineering the valence band offset at the perovskite/Cu2ZnSn(Se1-xSx)4 interface. Here, the valence band offset engineering at the perovskite/Cu2ZnSn(Se1-xSx)4 interface is studied through numerical simulation with SCAPS package. The valence band offset can be tuned from negative value to positive value with different Cu2ZnSn(Se1-xSx)4 composition. With optimized S concentration, a suitable valence band offset (0.27 eV) is obtained, leading to a power conversion efficiency of 20.25%. Further optimization of thickness, defect density, and acceptor density of the Cu2ZnSn(Se1-xSx)4 transport layer is conducted, and power conversion efficiency of 20.77% is obtained. This study here provides a guidance to further optimize the performance of perovskite solar cells with Cu2ZnSn(Se1-xSx)4 hole transport material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
2. CH3NH3PbI3 from non-iodide lead salts for perovskite solar cells via the formation of PbI210.1039/C5CP00073D ↗
3. Stability issues on perovskite solar cells10.3390/photonics2041139 ↗
4. Low-cost solution-processed copper iodide as an alternative to PEDOT: PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells10.1039/C5TA05286F ↗
5. Light-induced effects on Spiro-OMeTAD films and hybrid lead halide perovskite solar cells10.1016/j.solmat.2016.03.024 ↗
6. Flexible, hole transporting layer-free and stable CH3NH3 PbI3/PC61BM planar heterojunction perovskite solar cells10.1016/j.orgel.2016.01.002 ↗
7. Less is more: dopant‐free hole transporting materials for high‐efficiency perovskite solar cells10.1002/aenm.201702512 ↗
8. Numerical simulation: toward the design of high-efficiency planar perovskite solar cells10.1063/1.4885367 ↗
9. Impact of work function of back contact of perovskite solar cells without hole transport material analyzed by device simulation10.1016/j.cap.2014.08.002 ↗
10. Device modeling of perovskite solar cells based on structural similarity with thin film inorganic semiconductor solar cells10.1063/1.4891982 ↗
11. Effect of interface defect density on performance of perovskite solar cell: correlation of simulation and experiment10.1016/j.matlet.2018.03.095 ↗
12. Comparative study on MAPbI3 based solar cells using different electron transporting materials10.1002/pssc.201510078 ↗
13. S. Bansal, P. Aryal, Evaluation of new materials for electron and hole transport layers in perovskite-based solar cells through SCAPS-1D simulations, in: Proceedings of the Photovoltaic Specialists Conference, 2016. pp. 0747–0750.10.1109/PVSC.2016.7749702 ↗
14. A comprehensive device modelling of perovskite solar cell with inorganic copper iodide as hole transport material
15. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
16. Y. Wang, Z. Xia, Y. Liu, H. Zhou, Simulation of perovskite solar cells with inorganic hole transporting materials, in: Proceedings of the Photovoltaic Specialist Conference, 2015. pp. 1–4.10.1109/PVSC.2015.7355717 ↗
17. CZTSSe solar cell efficiency improvement using a new band-gap grading model in absorber layer10.1007/s00339-017-1371-x ↗
18. Comparison of theoretical and experimental results for band-gap-graded CZTSSe solar cell10.1016/j.cap.2017.06.003 ↗
19. A band-gap-graded CZTSSe solar cell with 12.3% efficiency
20. Band alignment at the Cu2ZnSn(SxSe1-x)4/CdS interface10.1063/1.3600776 ↗
21. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
22. Kesterite Cu2ZnSnS4 as a low-cost inorganic hole-transporting material for high-efficiency perovskite solar cells10.1021/acsami.5b09572 ↗
23. Controlling the band gap to improve open-circuit voltage in metal chalcogenide based perovskite solar cells10.1016/j.electacta.2016.08.130 ↗
24. Effective ligand engineering of the Cu2ZnSnS4 nanocrystal surface for increasing hole transport efficiency in perovskite solar cells10.1002/adfm.201603441 ↗
25. Solution-processed kesterite Cu2ZnSnS4 as efficient hole extraction layer for inverted perovskite solar cells10.1246/cl.180219 ↗
26. Modeling polycrystalline semiconductor solar cells
27. Electron transport layer-free planar perovskite solar cells: further performance enhancement perspective from device simulation10.1016/j.solmat.2016.08.025 ↗
28. Compositional grading of CZTSSe alloy using exponential and uniform grading laws in SCAPS-ID simulation10.1016/j.spmi.2016.02.019 ↗