journal article·2017-12

Optical properties of thermally evaporated In 2 S 3 thin films measured using photoacoustic spectroscopy

S. Rasool, K. Saritha, K.T. Ramakrishna Reddy, K. Raveendranath Reddy, L. Bychto, A. Patryn, M. Maliński, M.S. Tivanov, V.F. Gremenok

Publisher page

Abstract

Abstract In 2 S 3 is a III-VI group semiconductor with n-type conductivity and a wide band gap energy, which can be suitable as a buffer layer alternative to CdS in thin film solar cell fabrication. In the present study, In 2 S 3 thin films were grown on glass substrates by the thermal evaporation method at a constant substrate temperature of 200 °C. The deposited layers were post annealed in vacuum in the temperature range of 200–300 °C for 1 h. The grazing incident X-ray diffraction and scanning electron microscopy studies revealed polycrystalline nature of the layers with a good surface morphology. The optical properties of these annealed layers were investigated by using photoacoustic spectroscopy and independently by using conventional optical transmission spectroscopy. The photoacoustic spectra of In 2 S 3 films showed a sharp fall in the photoacoustic signal at photon energies that increased from 1.95 to 2.74 eV with increasing annealing temperature, which corresponds to the band gap energy of corresponding films. The band gap energy and the refractive index values calculated by using photoacoustic spectra are in good agreement with that determined from transmission spectra.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Optimization of rear reflectance in ultra-thin CIGS solar cells towards >20% efficiency10.1016/j.solener.2017.03.001 ↗
2. Ultrasonically sprayed indium sulfide buffer layers for Cu(In,Ga)(S,Se)2 thin film solar cells10.1016/j.tsf.2008.10.135 ↗
3. Band alignment at the In2S3/Cu2ZnSnS4 heterojunction interface investigated by X-ray photoemission spectroscopy10.1007/s00339-014-8431-2 ↗
4. Characterization of photovoltaics with In2S3 nano flakes/p-Si heterojunction10.1186/1556-276X-9-32 ↗
5. Chemical bath deposition of indium sulfide thin films: preparation and characterization10.1016/S0040-6090(98)00980-8 ↗
6. Structural and chemical analyses of sputtered InxSy buffer layers in Cu(In,Ga)Se2 thin-film solar cells10.1016/j.tsf.2008.10.138 ↗
7. Reactively evaporated films of indium sulfide10.1002/pssa.2211060116 ↗
8. Atomic layer deposition of zinc oxide and indium sulfide layers for Cu(In,Ga)Se2 thin-film solar cells10.1016/S0040-6090(00)01838-1 ↗
9. Recent studies on In2S3 containing oxygen thin films10.1016/S0038-1098(02)00099-6 ↗
10. Simple chemical method for nanoporous network of In2S3 platelets for buffer layer in CIS solar cells10.1016/j.jmatprotec.2007.11.307 ↗
11. Cd-free Cu(In,Ga)Se2 thin-film solar modules with In2S3 buffer layer by ALCVD10.1016/S0040-6090(03)00151-2 ↗
12. Fabrication and characterization of In2S3 thin films deposited by thermal evaporation technique10.1016/j.tsf.2004.11.036 ↗
13. Optical characterization of In2S3, solar cell buffer layers grown by chemical bathand physical vapor deposition10.1016/j.solmat.2008.04.002 ↗
14. Characterization of ultrasonically sprayed InxSy buffer layers for Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2006.12.168 ↗
15. On the production and reproduction of sound by light10.2475/ajs.s3-20.118.305 ↗
16. Optical and thermal properties of In2S310.1155/2011/734574 ↗
17. Optical properties of In2S3: Co2+ single crystals10.1063/1.340371 ↗
18. A microwave route for the synthesis of nanoflakes and dendrites-type β- In2S3 and their characterization10.1166/jnn.2006.134 ↗
19. Effect of substrate temperatures on evaporated In2S3 thin film buffer layers for Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2013.05.071 ↗
20. Chopra · 1969 · 163
21. Growth of stoichiometric indium sulfide films by thermal evaporation: influence of vacuum annealing on structural and physical properties10.1016/j.tsf.2012.09.070 ↗
22. Warren · 1990 · 253
23. Effect of air annealing on structural, optical, morphological, and electrical properties of thermally evaporated CdSe thin films10.1016/j.physe.2015.01.028 ↗
24. Fabrication of Cu(In,Ga)Se2 solar cell with ZnS/CdS double layer as an alternative buffer10.1016/j.cap.2009.11.019 ↗
25. Thermal and optical properties of polycrystalline CdS thin films deposited by the gradient recrystallization and growth (GREG) technique using photoacoustic methods10.1016/j.tsf.2008.11.006 ↗
26. Optical and structural properties of ZnO + Zn2TiO4 thin films prepared by the sol-gel method
27. Structural and optical studies on thermal-annealed In2S3 films prepared by the chemical bath deposition technique10.1016/j.tsf.2004.05.096 ↗
28. Influence of annealing on the optical parameters of In2S3 thin films produced by thermal evaporation10.1007/s10812-014-9924-7 ↗
29. Annealing effect on the physical properties of evaporated In2S3 films10.1016/j.solmat.2010.02.044 ↗
30. Effect of thermal annealing on physical properties of vacuum evaporated In2S3 buffer layer for eco-friendly photovoltaic applications10.1016/j.mssp.2015.06.049 ↗
31. Influence of post deposition annealing on the structural and optical properties of sputtered zinc oxide films10.1063/1.362842 ↗
32. Crystal structure and optical absorption investigation on β-In2S3 thin films10.1016/j.tsf.2006.06.036 ↗
33. Determination of the thickness and optical constants of amorphous silicon10.1088/0022-3735/16/12/023 ↗