journal article·2018-03

Optimization of TiO2/ZnO bilayer electron transport layer to enhance efficiency of perovskite solar cell

Nitu Kumari, Jignasa V. Gohel, Sanjaykumar R. Patel

Publisher page

Abstract

Abstract In the present study, TiO2/ZnO bilayer as electron transport layer is optimized and used to design a perovskite solar cell. This bilayer helps in high electron extraction and low interfacial recombination. TiO2 films are prepared using spray pyrolysis techniques on fluorine doped tin oxide substrate. The deposition parameters are optimized using parametric study as well as using the Taguchi optimization technique. ZnO is used as other part of electron transport bilayer to reduce the charge recombination. The thickness of prepared TiO2 film obtained at Taguchi optimum condition (103 nm) is lower than that of obtained at parametric optimum condition (147 nm). At optimum conditions, the optical band gaps are in the range of 3.20–3.25 eV. The prepared TiO2 films are consequently applied in perovskite solar cell preparation. 4-tert-butylpyridine is used with PbI2 to increase the stability of the perovskite solar cell. In addition, spiro-OMeTAD and Pt- fluorine doped tin oxide are used as hole transport material and counter electrode, respectively. The power conversion efficiency of the device at optimum conditions (parametric (D5) and Taguchi (D9)) has been found as 5.59% and 6.51%, respectively. The power conversion efficiency of the device using 4-tert-butylpyridine as stabilizer has been found as 7.39% (D11), which is highest among all devices. Current density (Jsc), open circuit voltage (Voc) and the fill factor obtained for the device (D11) are 17.87 mA cm−2, 0.65 V, and 64%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. TiO2 anatase thin films deposited by spray pyrolysis of an aerosol of titanium diisopropoxide10.1016/j.tsf.2004.07.010 ↗
2. Flexible highly sensitive hydrogen gas sensor based on a TiO2 thin film on polyimide foil10.1016/j.snb.2016.09.036 ↗
3. Chemically grown TiO2 on glass with superior photocatalytic properties10.1016/j.jece.2014.07.015 ↗
4. Enhancement of photovoltaic performance of perovskite solar cells by modification of the interface between the perovskite and mesoporous TiO2 film10.1016/j.solmat.2016.05.004 ↗
5. Multilayer AR coatings of TiO2/MgF2 for application in optoelectronic devices10.1016/j.ijleo.2017.02.085 ↗
6. Effects of oxide contact layer on the preparation and properties of CH3NH3PbI3 for perovskite solar cell application10.1021/acs.jpcc.5b02984 ↗
7. Electrochromic properties of TiO2 thin films grown by thermionic vacuum arc method
8. Low-temperature preparation of rutile-type TiO2 thin films for optical coatings by aluminum doping10.1016/j.apsusc.2017.03.253 ↗
9. Optical and electrical responses of magnetron-sputtered amorphous Nb-doped TiO2 thin films annealed at low temperature
10. A comparative study on the photocatalytic efficiency of ZnO thin films prepared by spray pyrolysis and sol–gel method10.1016/j.surfcoat.2011.10.020 ↗
11. Optimization of process parameters by Taguchi method in the recovery of lactose from whey using sonocrystallization10.1002/crat.201000139 ↗
12. The effect of solution flow rate and substrate temperature on structural and optical properties of TiO2 films deposited by spray pyrolysis technique10.1016/j.tsf.2016.11.040 ↗
13. Effect of deposition parameters on the properties of TiO2 thin films prepared by spray pyrolysis10.1007/s10971-015-3836-8 ↗
14. The influence of concentration on the morphology of TiO2 thin films prepared by spray pyrolysis for electrochemical study10.1007/s00339-017-1008-0 ↗
15. Effect of sprayed solution flow rate on the physical properties of anatase TiO2 thin films10.1007/s11664-014-3341-9 ↗
16. Morphology and structure improvement of the hybrid CH3NH3PbI3 perovskite film via external doping10.1016/j.tsf.2017.06.028 ↗
17. All solution processed perovskite solar cells with Ag-Au nanowires as top electrode10.1016/j.solmat.2017.06.025 ↗
18. The growth of a CH3NH3PbI3 thin film using simplified close space sublimation for efficient and large dimensional perovskite solar cells10.1039/C5EE03620H ↗
19. Organometal halide perovskites as visible light sensitizers for photovoltaic cells10.1021/ja809598r ↗
20. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
21. Enhancing current density of perovskite solar cells using TiO2-ZrO2 composite scaffold layer10.1016/j.mssp.2016.07.003 ↗
22. Effects of morphology and thickness of Al2O3 scaffold on charge transport in Perovskite-based solar cells10.1016/j.solener.2017.05.090 ↗
23. Enhanced performance in hole transport material free perovskite solar cells via morphology control of PbI2 film by solvent treatment10.1016/j.jpowsour.2016.04.062 ↗
24. An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide10.1021/ja411014k ↗
25. Efficient inorganic organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
26. Compact nanostructured TiO2 deposited by aerosol spray pyrolysis for the hole blocking layer in a CH3NH3PbI3 perovskite solar cell10.1016/j.solener.2016.07.035 ↗
27. General working principles of CH3NH3PbX3 perovskite solar cells10.1021/nl404252e ↗
28. Spray deposited lanthanum doped TiO2 compact layers as electron selective contact for perovskite solar cells10.1016/j.solmat.2017.04.027 ↗
29. CH3NH3PbI3 perovskite sensitized solar cells using a D-A copolymer as hole transport material10.1016/j.electacta.2014.11.003 ↗
30. Performance enhancement of perovskite solar cells by doping TiO2 blocking layer with group VB elements10.1016/j.jallcom.2016.10.106 ↗
31. Ammonium iodide salt additives induced photovoltaic performance enhancement in one-step solution process for perovskite solar cells10.1016/j.jallcom.2016.05.154 ↗
32. TiO2/ZnO/TiO2 sandwich multi-layer films as a hole blocking layer for efficient perovskite solar cells10.1002/er.3485 ↗
33. Highly efficient planar perovskite solar cells with a TiO2/ZnO electron transport bilayer10.1039/C5TA04239A ↗
34. Ternary oxides in the TiO2−ZnO system as efficient electron transport layers for perovskite solar cells with efficiency over 15%10.1021/acsami.6b09326 ↗
35. Multi-response optimization of ZnO thin films using Grey-Taguchi technique and development of a model using ANN10.1016/j.ijleo.2017.06.107 ↗
36. Enhancing efficiency of perovskite solar cell via surface microstructuring: superior grain growth and light harvesting effect10.1016/j.solener.2014.11.016 ↗
37. Cesium containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
38. Characterization of spray-deposited ZnO thin films for dye-sensitized solar cell application10.1007/s00339-016-0191-8 ↗
39. Investigating the charge carrier transport within the hole-transport material free perovskite solar cell processed in ambient air10.1016/j.solmat.2015.04.028 ↗
40. Hybrid perovskite films by a new variant of pulsed excimer laser deposition: a room temperature dry process10.1021/acs.jpcc.5b02561 ↗
41. Highly enhanced photocurrent of novel quantum-dot-co-sensitized PbS–Hg/CdS/Cu:ZnO thin films for photoelectrochemical applications10.1007/s00339-017-1116-x ↗
42. Mechanism of carrier accumulation in perovskite thin-absorber solar cells10.1038/ncomms3242 ↗
43. Efficient and stable perovskite solar cells prepared in ambient air based on surface modified perovskite layer10.1021/acs.jpcc.7b00847 ↗