Research progress of absorber film of inorganic perovskite solar cells: Fabrication techniques and additive engineering in defect passivation
Source abstract
Abstract
Abstract Recently, inorganic perovskite materials have attracted extensive attention due to their advantages such as excellent photoelectric performance, adjustable band gap and simple preparation process. At present, the photoelectric conversion efficiency of inorganic perovskite solar cells have exceeded 19.0%. However, there are many kinds of defects on the surfaces and grain boundaries of the perovskite films, which seriously affect the efficiency and stability of the device. Therefore, how to effectively control the crystallization process and passivate the surface defects of the inorganic perovskite films are challenges in this field. In this paper, by analyzing the types and mechanism of inorganic perovskite film defects, the influence of inorganic perovskite film preparation technique on crystallization in recent years is reviewed, passivation strategies for different kinds of additives are discussed in combination with Lewis acid base theory, and interface engineering on both sides of the perovskite film is summarized. Finally, the future research emphasis of inorganic perovskite solar cell is prospected.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Benefit of grain boundaries in organic-inorganic halide planar perovskite solar cells10.1021/acs.jpclett.5b00182 ↗
2. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
3. Organic-inorganic lead halide perovskite solar cell materials: a possible stability problem10.1016/j.cplett.2014.11.063 ↗
4. Perovskite solar cells: an emerging photovoltaic Technology10.1016/j.mattod.2014.07.007 ↗
5. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
6. Functional additives for high-performance inverted planar perovskite solar cells with exceeding 20% efficiency: selective complexation of organic cations in precursors10.1016/j.nanoen.2020.104639 ↗
7. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
8. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2‐CH3NH3I‐H2O system10.1002/aenm.201600846 ↗
9. Effect of different lead precursors on perovskite solar cell performance and stability10.1039/C4TA06198E ↗
10. Bismuth incorporation stabilized α-CsPbI3 for fully inorganic perovskite solar cells10.1021/acsenergylett.7b00508 ↗
11. Can B-site doping or alloying improve thermal- and phase-stability of all-inorganic CsPbX3 (X = Cl, Br, I) perovskites?10.1021/acsenergylett.7b01197 ↗
12. Schottky solar cells based on CsSnI3 thin-films
13. A critical review on tin halide perovskite solar cells10.1039/C7TA00929A ↗
14. Untapped potentials of inorganic metal halide perovskite solar cells10.1016/j.joule.2019.02.002 ↗
15. Inorganic perovskite solar cells: an emerging member of the photovoltaic community10.1039/C9TA06674H ↗
16. Highly air-stable carbon-based α-CsPbI3 perovskite solar cells with a broadened optical spectrum10.1021/acsenergylett.8b00820 ↗
17. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant?10.1002/anie.201910800 ↗
18. Inorganic CsPbI3 perovskite-based solar cells: a choice for a tandem device10.1002/solr.201700048 ↗
19. Solvent engineering for ambient-air-processed, phase-stable CsPbI3 in perovskite solar cells10.1021/acs.jpclett.6b01576 ↗
20. All-inorganic perovskite solar cells10.1021/jacs.6b10227 ↗
21. Europium-doped CsPbI2Br for stable and highly efficient inorganic perovskite solar cells10.1016/j.joule.2018.10.008 ↗
22. Recent progress of inorganic perovskite solar cells10.1039/C9EE01479A ↗
23. Temperature-assisted crystallization for inorganic CsPbI2Br perovskite solar cells to attain high stabilized efficiency 14.81%10.1016/j.nanoen.2018.08.012 ↗
24. Enhancing optical, electronic, crystalline, and morphological properties of cesium lead halide by Mn substitution for high-stability all-inorganic perovskite solar cells with carbon electrodes10.1002/aenm.201800504 ↗
25. Trap center study in hybrid organic-inorganic perovskite using thermally stimulated current (Tsc) analysis
26. Defect trapping states and charge carrier recombination in organic-inorganic halide perovskites10.1039/C5TC03109E ↗
27. The identification and characterization of defect states in hybrid organic-inorganic perovskite photovoltaics10.1039/C4CP04479G ↗
28. Unveiling the light soaking effects of the CsPbI3 perovskite solar cells10.1016/j.jpowsour.2020.228506 ↗
29. Bandgap-tunable cesium lead halide perovskites with high thermal stability for efficient solar cells10.1002/aenm.201502458 ↗
30. Efficient and stable inorganic perovskite solar cells manufactured by pulsed flash infrared annealing10.1002/aenm.201802060 ↗
31. A semitransparent inorganic perovskite film for overcoming ultraviolet light instability of organic solar cells and achieving 14.03% efficiency10.1002/adma.201800855 ↗
32. Additive engineering for efficient and stable perovskite solar cells10.1002/aenm.201902579 ↗
33. A review on perovskite solar cells: evolution of architecture, fabrication techniques, commercialization issues and status10.1016/j.solener.2020.01.080 ↗
34. Building bridges between halide perovskite nanocrystals and thin-film solar cells10.1039/C8SE00315G ↗
35. Identification of trap states in perovskite solar cells10.1021/acs.jpclett.5b00953 ↗
36. Defect and contact passivation for perovskite solar cells10.1002/adma.201900428 ↗
37. Unlocking the effect of trivalent metal doping in all-inorganic CsPbBr3 perovskite10.1021/acsenergylett.9b00209 ↗
38. Hole trapping by iodine interstitial defects decreases free carrier losses in perovskite solar cells: a time-domain ab initio study10.1021/acsenergylett.7b00183 ↗
39. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
40. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
41. Defect-tolerant sodium-based dopant in charge transport layers for highly efficient and stable perovskite solar cells10.1021/acsenergylett.0c00514 ↗
42. Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering10.1039/C7CS00868F ↗
43. Ion migration and the role of preconditioning cycles in the stabilization of the J-Vcharacteristics of inverted hybrid perovskite solar cells10.1002/aenm.201501453 ↗
44. Carrier trapping and recombination: the role of defect physics in enhancing the open circuit voltage of metal halide perovskite solar cells10.1039/C6EE01729K ↗
45. Imperfections and their passivation in halide perovskite solar cells10.1039/C8CS00853A ↗
46. Synergy between ion migration and charge carrier recombination in metal-halide perovskites10.1021/jacs.9b12391 ↗
47. Synergistic effects of lead thiocyanate additive and solvent annealing on the performance of wide-bandgap perovskite solar cells10.1021/acsenergylett.7b00278 ↗
48. Morphology evolution and degradation of CsPbBr3 nanocrystals under blue light-emitting diode illumination10.1021/acsami.6b14423 ↗
49. Extent of shallow/deep trap states beyond the conduction band minimum in defect-tolerant CsPbBr3 perovskite quantum dot: control over the degree of charge carrier recombination10.1021/acs.jpclett.0c00385 ↗
50. Water‐soluble triazolium ionic‐liquid‐induced surface self‐assembly to enhance the stability and efficiency of perovskite solar cells10.1002/adfm.201900417 ↗
51. Efficient perovskite solar cells by hybrid perovskites incorporated with heterovalent neodymium cations10.1016/j.nanoen.2019.04.073 ↗
52. Divalent hard Lewis acid doped CsPbBr3 films for 9.63%-efficiency and ultra-stable All-inorganic perovskite solar cells10.1039/C9TA00761J ↗
53. Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering10.1038/nenergy.2016.148 ↗
54. Stable high‐performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗
55. Stabilizing cesium lead halide perovskite lattice through Mn (II) substitution for air-stable light-emitting diodes10.1021/jacs.7b04000 ↗
56. Fluorescent alloy CsPbxMn1-xI3 perovskite nanocrystals with high structural and optical stability10.1021/acsenergylett.7b00707 ↗
57. Niobium incorporation into CsPbI2Br for stable and efficient all-inorganic perovskite solar cells10.1021/acsami.9b03622 ↗
58. A universal double-side passivation for high open-circuit voltage in perovskite solar cells: role of carbonyl groups in poly (methyl methacrylate)10.1002/aenm.201801208 ↗
59. Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation
60. Bidentate chelating ligands as effective passivating materials for perovskite light-emitting diodes10.1039/C8CP07000H ↗
61. Inorganic CsPb1-xSnxIBr2 for efficient wide‐bandgap perovskite solar cells10.1002/aenm.201800525 ↗
62. Improved stability and photodetector performance of CsPbI3 perovskite quantum dots by ligand exchange with aminoethanethiol10.1002/adfm.201902446 ↗
63. Fabrication of organic-inorganic perovskite thin films for planar solar cells via pulsed laser deposition10.1063/1.4939621 ↗
64. Inorganic caesium lead iodide perovskite solar cells10.1039/C5TA06398A ↗
65. Efficient perovskite solar cell fabricated in ambient air using one-step spin-coating10.1039/C6RA05893K ↗
66. Hot-air-assisted fully air-processed barium incorporated CsPbI2Br perovskite thin films for highly efficient and stable All-inorganic perovskite solar cells10.1021/acs.nanolett.9b02277 ↗
67. Light processing enables efficient carbon-based, all-inorganic planar CsPbIBr2 solar cells with high photovoltages10.1021/acsami.8b17839 ↗
68. Benign pinholes in CsPbIBr2 absorber film enable efficient carbon-based, all-inorganic perovskite solar cells10.1021/acsaem.9b00944 ↗
69. Optimizing the substrate pre-heating and post-annealing temperatures for fabricating high-performance carbon-based CsPbIBr2 inorganic perovskite solar cells10.1016/j.electacta.2020.136354 ↗
70. Structurally reconstructed CsPbI2Br perovskite for highly stable and square‐centimeter all‐inorganic perovskite solar cells10.1002/aenm.201803572 ↗
71. Aged precursor solution toward low-temperature fabrication of efficient carbon-based all-inorganic planar CsPbIBr2 perovskite solar cells10.1021/acsaem.8b00972 ↗
72. Solvent engineering for efficient inverted perovskite solar cells based on inorganic CsPbI2Br light absorber10.1016/j.mtener.2018.03.006 ↗
73. Synthesis of highly-oriented black CsPbI3 microstructures for high-performance solar cells10.1021/acs.chemmater.0c00427 ↗
74. Efficient all-inorganic CsPbI2Br perovskite solar cell with carbon electrode by revealing crystallization kinetics and improving crystal quality10.1016/j.jpowsour.2019.227389 ↗
75. Flux-mediated growth strategy enables low-temperature fabrication of high-efficiency all-inorganic CsPbIBr2 perovskite solar cells10.1016/j.electacta.2019.135325 ↗
76. Low-temperature preparation of CsPbI2Br for efficient and stable perovskite solar cells10.1021/acsaem.9b02102 ↗
77. Tailoring component interaction for air‐processed efficient and stable All‐inorganic perovskite photovoltaic10.1002/anie.202004256 ↗
78. Morphology control of perovskite in green antisolvent system for MAPbI3-based solar cells with over 20% efficiency10.1016/j.solmat.2019.110197 ↗
79. Regulated perovskite crystallinity via green mixed antisolvent for efficient perovskite solar cells10.1016/j.orgel.2019.03.021 ↗
80. Enhanced crystallization by methanol additive in antisolvent for achieving high‐quality MAPbI3 perovskite films in humid atmosphere10.1002/cssc.201800625 ↗
81. Effective management of nucleation and crystallization processes in perovskite formation via facile control of antisolvent temperature10.1021/acsaem.9b01916 ↗
82. A green anti‐solvent process for high performance carbon‐based CsPbI2Br all‐inorganic perovskite solar cell10.1002/solr.201800139 ↗
83. Improving the performance and reproducibility of inverted planar perovskite solar cells using tetraethyl orthosilicate as the antisolvent10.1021/acsami.8b18402 ↗
84. High-efficiency and stable perovskite solar cells prepared using chlorobenzene/acetonitrile antisolvent10.1021/acsami.9b12323 ↗
85. Mediator–antisolvent strategy to stabilize all-inorganic CsPbI3 for perovskite solar cells with efficiency exceeding 16%10.1021/acsenergylett.0c00497 ↗
86. Perovskite films grown with green mixed anti-solvent for highly efficient solar cells with enhanced stability10.1016/j.solener.2019.02.020 ↗
87. High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells10.1002/adfm.201604733 ↗
88. Reduced-dimensional Α-CsPbX3 perovskites for efficient and stable photovoltaics10.1016/j.joule.2018.05.004 ↗
89. Μ‐graphene crosslinked CsPbI3 quantum dots for high efficiency solar cells with much improved stability10.1002/aenm.201800007 ↗
90. Quantum dot light‐emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3)10.1002/adma.201502567 ↗
91. All-inorganic perovskite quantum dot/mesoporous TiO2 composite-based photodetectors with enhanced performance10.1039/C6DT04758K ↗
92. Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification10.1002/smll.201901173 ↗
93. CsPbBr3/Reduced graphene oxide nanocomposites and their enhanced photoelectric detection application10.1016/j.snb.2017.01.168 ↗
94. Dependence of halide composition on the stability of highly efficient all-inorganic cesium lead halide perovskite quantum dot solar cells10.1016/j.solmat.2018.05.002 ↗
95. GeI2 additive for high optoelectronic quality CsPbI3 quantum dots and their application in photovoltaic devices10.1021/acs.chemmater.8b03871 ↗
96. Enhanced mobility CsPbI3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells10.1126/sciadv.aao4204 ↗
97. Short‐chain ligand‐passivated stable α‐CsPbI3 quantum dot for all‐inorganic perovskite solar cells10.1002/adfm.201900991 ↗
98. Congeneric incorporation of CsPbBr3 nanocrystals in a hybrid perovskite heterojunction for photovoltaic efficiency enhancement10.1021/acsenergylett.7b00925 ↗
99. Surface modification induced by perovskite quantum dots for triple-cation perovskite solar cells10.1016/j.nanoen.2019.104189 ↗
100. Graded bandgap CsPbI2+xBr1-x perovskite solar cells with a stabilized efficiency of 14.4%10.1016/j.joule.2018.04.012 ↗