Transient photo-response properties of CdTe thin films synthesized by screen printing technique
Source abstract
Abstract
Abstract Group II-VI compound semiconductors are an important class of opto-electronic materials. They find important applications in detector and photovoltaic cell using both in bulk as well as thin film form. In this reference Cadmium Telluride thin films were prepared by screening printing technique and sintered at different temperatures in open environment. In this paper the comparative detailed analysis of transient photo response of CdTe (Cadmium Telluride) thin films sintered at three different temperatures are presented. For this pulsed photo-response was measured as function of three different intensity of illumination within range of 40–120 mW/cm2, along with three different applied bias voltages i.e. 10 V, 13 V and 15 V. From these photo-response analysis, different photo-response parameters e.g. photo-current at termination of illumination (Io), probability of escape of an electron from trap per second (p) and trap depth (Et) have been calculated and compared for all three films along with all three applied bias voltage and intensity of illumination. Estimation of rise and decay time is made from pulsed photo response curves and a comparative study is presented. It shows that photo-current is a strong function of intensity of illumination, sintering temperature and bias voltage. However, different photo-response parameters e.g. probability of escape of an electron from trap per second, trap depth, rise time and decay time are less dependent on sintering temperature. Observed value of long decay time is due to the process induced trap inclusion in the prepared samples which make these films suitable candidate for low processing cost solar cell material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Advanced Semiconductor Detectors and Materials · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Annealing effects on physical properties of doped CdTe thin films for photovoltaic applications
2. Optimization of physical properties of vacuum evaporated CdTe thin films with the application of thermal treatment for solar cells
3. Ligang Ma, Wenchao Liu, Hongling Cai, Fengming Zhang, Xiaoshan Wu, Catalyst- and template-free low temperature in situ growth of n-type CdS nano wire on p-type CdTe film and p-n heterojunction properties, Sci. Rep., 6, p. 38858.10.1038/srep38858 ↗
4. Correlation between the Solution Chemistry to Observed Properties of CdTe thin films prepared by cbd method10.4236/jmp.2012.312235 ↗
5. Preparation and study of CdTe thin-films grown by the solution method10.1016/0025-5408(89)90107-4 ↗
6. Preparation and properties of cadmium telluride prepared by a 3-step process10.1021/cm00034a031 ↗
7. High efficiency ultra-thin sputtered CdTe solar cells10.1016/j.solmat.2006.02.029 ↗
8. Cadmium Telluride (CdTe) thin film for photovoltaic applications
9. Characterization of vacuum evaporated CdTe thin films prepared at ambient temperature
10. Optical and structural characterization of cdte thin films by chemical bath deposition technique
11. Electrodeposition behavior of CdTe from choline chloride-urea ionic liquids
12. Characterization of spray deposited CdTe films grown under different ambient conditions10.1016/j.solidstatesciences.2009.06.030 ↗
13. N.Suyama, T.Arita, Y.Nishiyama, N.Wueno, S.Kitamura, M. Murozona, Proc. 5th Int. Photovoltaic Sci. Eng. Conf, New York, 1990, pp. 757–760.
14. Screen printed and sintered CdTe-CdS solar cells10.1080/01425919208909751 ↗
15. Synthesis and characterization of screen-printed CdS films10.2298/SOS1103335K ↗
16. Electrical properties of cadmium telluride screen-printed films for photovoltaic applications
17. Clemminck, M. Burgelman, M. Casteleyn, J. De Poorter, A. Vervaet, Interdiffusion of CdS and CdTe in screenprinted and sintered CdS-CdTe solar cells, 2, 1991, pp. 1114–1119.10.1007/978-94-011-3622-8_147 ↗
18. Temperature dependence of dc photoconductivity in CdTe thin films10.1007/BF02704290 ↗
19. Characterization of vacuum evaporated ZnSe thin films10.1016/j.physb.2006.12.047 ↗
20. Enhancement of the performance of dye sensitized solar cell by formation of shallow transport levels under visible light illumination10.1021/jp800426y ↗
21. Influence of oxygen and water related surface defects on the dye sensitized TiO210.1016/S0927-0248(98)00153-6 ↗
22. Shallow and deep trap emission and luminescence quenching of TiO2 nanoparticles on Cu doping10.1007/s13204-013-0226-9 ↗
23. Rise and decay of pohotocurrent: a study in (Tio2-CdO) mixed composite
24. photoconductivity and photo-detecting properties of vacuum deposited ZnSe thin films10.1016/j.solidstatesciences.2011.08.017 ↗
25. Photoconductivity properties of vacuum deposited CdSe films10.1016/0040-6090(83)90069-X ↗
26. Space charge limited currents in organic films: some open problems10.1016/j.tsf.2007.11.070 ↗
27. Study of density of localized states in Cd4Se96-XSX(X = 0, 4 8, 12) chalcogenide semiconductor10.1016/j.jpcs.2015.04.013 ↗
28. Effects of sintering temperature on open-volume defects and thermoluminescence of yttria and lutetia ceramics10.1111/jace.14119 ↗
29. Ryvkin · 1969 · 88
30. S. Chaliha, Studies of ZnSe and Indium Tin Oxide Based Thin Film Schottky Barriers and Heterojunction for Their Electrical and Optical Properties (Ph.D. Thesis), Gauhati University, India, 2008.
31. Photophorescence and electron traps. I. The study of trap distribution10.1098/rspa.1945.0024 ↗
32. Kalita, photoresponsecharecteristic of vacuume evaporated ZnTe thin films
33. Densification during sintering in the presence of a liquid phase I. Theory10.1063/1.1735155 ↗
34. German · 1985