journal article·2017-06

Influences of substrate type on the pH sensitivity of CuS thin films EGFET prepared by spray pyrolysis deposition

Fayroz A. Sabah, Naser M. Ahmed, Z. Hassan, Munirah Abdullah Almessiere

Publisher page

Abstract

Abstract Copper sulphide (CuS) thin films were deposited by spray pyrolysis using CuCl2·2H2O and Na2S2O3·5H2O precursors as sources of Cu2+ and S2- respectively, with deionized water as a solvent. Three types of substrates were used for films deposition; glass, tungsten and Si. X-ray measurements of the structural characteristics of the deposited films indicated single phase CuS covellite phase with orientations in the z-axis (001). The presence of oxygen suggested improved pH sensing characteristics. Morphological characterization showed differences in shape and size of CuS crystal structure, which affect the surface-to-volume ratio and surface site density of the substrates. The as-deposited films were used as extended gates of field effect transistor to measure the pH sensitivity for buffer solutions in the set of 2-to-12 step 2; the optimum pH sensitivity was 23.3 mV/pH for CuS/glass membrane. The hysteresis was measured for buffer solutions prepared at pH7-pH4-pH7-pH10-pH7 in order to find its pH response delay; the minimum value was 0.48 mV for glass substrate. Also, the repeatability, stability and reliability of the (CuS) thin films were measured in terms of coefficient of variation (C.V.) with the same setup used for measuring pH sensitivity. Repeatability values of 0.04%, 0.02% and 0.38% were recorded for glass, tungsten and Si, respectively, while stability and reliability values of 0.15%, 0.15% and 0.10% were recorded at pH4, pH7 and pH10, respectively, for glass substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Analytical Chemistry and Sensors · Gas Sensing Nanomaterials and Sensors · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Sensing performance of EGFET pH sensors with CuO nanowires fabricated on glass substrate10.1016/S1452-3981(23)19600-3 ↗
2. Investigation of InN nanorod-based EGFET pH sensors fabricated on quartz substrate
3. Nanostructured EGFET pH sensors with surface-passivated ZnO thin-film and nanorod array10.1109/JSEN.2011.2162317 ↗
4. Coaxial-structured ZnO/silicon nanowires extended-gate field-effect transistor as pH sensor10.1016/j.tsf.2012.05.045 ↗
5. Annealing effects on resistivity properties of vacuum evaporated Cu2S thin films
6. Effects of deposition time on the chemical bath- deposited CuS thin films10.3126/jncs.v25i0.3276 ↗
7. Highly efficient visible light photocatalysis of novel CuS/ZnS heterostructure nanowire arrays
8. Comparative studies of spray pyrolysis deposited copper sulfide nanostructural thin films on glass and FTO coated glass10.1007/s12034-012-0363-x ↗
9. Spray pyrolysis deposition of CuS thin films10.1016/S0167-577X(97)00015-3 ↗
10. CuS thin films obtained by spray pyrolysis
11. The growth of CuS thin films by spray pyrolysis
12. Study effects of thin film thickness on the behavior of CuS EGFET implemented as pH sensor
13. Sensitivity of CuS and CuS/ITO EGFETs implemented as pH sensors10.1007/s00339-016-0362-7 ↗
14. Sensitivity of CuS membrane pH sensor with and without MOSFET
15. Effect of light on the sensitivity of CuS thin film EGFET implemented as pH sensor10.20964/2016.06.51 ↗
16. pH-sensing characteristics of hydrothermal Al-doped ZnO nanostructures, Hindawi publishing corporation
17. On sensitivity of electrolyte-ferroelectric-insulator (EFIS) pH-sensors
18. Synthesis and characterization of vanadium oxide/hexadecylamine membrane and its application as pH-EGFET sensor10.1007/s10971-009-2062-7 ↗
19. Sensing performance of EGFET pH sensors with CZTSe nanoparticles fabricated on glass substrates10.1016/S1452-3981(23)14437-3 ↗
20. Interdigitated extended gate field effect transistor without reference electrode
21. Sensitivity of EGFET pH Sensors with TiO2 Nanowires10.1149/2.0091410ssl ↗
22. A novel pH sensor of extended-gate field-effect transistors with laser-irradiated carbon-nanotube network10.1109/LED.2012.2213794 ↗
23. ZnO extended-gate field-effect transistors as pH sensors10.1063/1.2084319 ↗
24. Comparative sensibility study of WO3 ph sensor using EGFET and ciclic voltammetry10.1590/1516-1439.252513 ↗
25. M. Zulkefle, R. Rahman, M. Mahmood, W. Abdullah, S. Herman, Sensing capability of TiO2 thin films with different thicknesses as sensing membrane of EGFET pH sensor, in: Proceedings of the 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET), August 25−27, Langkawi, Kedah, Malaysia, 2015, pp. 30–33.10.1109/ISTMET.2015.7358995 ↗
26. pH sensing characteristics of extended-gate field-effect transistor based on Al-doped ZnO nanostructures hydrothermally synthesized at low temperatures10.1109/LED.2011.2164230 ↗
27. Study of indium tin oxide thin film for separative extended gate ISFET10.1016/S0254-0584(00)00373-4 ↗
28. Highly sensitive palladium oxide thin film extended gate FETs as pH sensor10.1016/j.snb.2014.08.057 ↗
29. V2O5/WO3 mixed oxide films as pH-EGFET sensor: sequential re-usage and fabrication volume analysis10.1149/2.007203jss ↗
30. Optical and impedance characteristics of EGFET based on SnO2/ITO sensing gate
31. Site-binding model of the electrical double layer at the oxide/water interface10.1039/f19747001807 ↗
32. High sensitivity pH sensor based on porous silicon (PSi) extended gate field-effect transistor10.3390/s16060839 ↗
33. Member, IEEE, an extended-gate field-effect transistor with low-temperature hydrothermally synthesized SnO2 nanorods as pH sensor10.1109/LED.2012.2210274 ↗
34. Fabrication and characterization of a ruthenium nitride membrane for electrochemical pH sensors10.3390/s90402478 ↗