Impact of grain boundary defect on performance of perovskite solar cell
Source abstract
Abstract
Abstract Methyl ammonium lead halide (MAPbI3) perovskite is a crystalline material. It shows interesting properties that are suitable for absorber layer of solar cell. An optimized solar cell requires 200–400 nm thick absorber layer. However, the thin absorber layer inevitably contains grain of crystallites and hence grain boundary (GB) defects. The GB defects affect device performance. Therefore, we theoretically investigated the effects of GB defects on performance of solar cells. In this simulation studies, we kept total mid-gap defect density (Nd) as constant at 4×1017 cm−3 but varied the GB defect density (GBdd) from 3×1012 cm−3 to 3×1022 cm−3, because of which, the observed short circuit current density (Jsc) of the cells remain nearly unchanged, but the open circuit voltage (Voc) and power conversion efficiency (PCE) decreased steadily, while the fill factor (FF) shows a different trend of variation in a region (Region-X, say) where the GBdd and the Nd were nearly equal. A further investigation reveals that in the Region-X, a transition happens from defect mediated recombination to GB mediated recombination, where the reverse saturation current density (J0) and diode ideality factor (n) of the solar cells, reduce sharply from 3.46×10–13 A cm−2 to 2.65×10–19 A cm−2 and 1.9 to 1.1, respectively for a cell with 200 nm thick absorber layer. For 400 nm thick absorber layer, reduction of these parameters was 1.96×10–13 A cm−2 to 1.20×10–17 A cm−2 and 1.8 to 1.2 respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
2. Facile face-down annealing triggered remarkable texture development in CH3NH3PbI3 films for high-performance perovskite solar cells10.1021/acsami.6b15563 ↗
3. Improving efficiency of planar hybrid CH3NH3PbI3-xClx perovskite solar cells by isopropanol solvent treatment10.1016/j.orgel.2015.05.043 ↗
4. Triple cathode buffer layers composed of PCBM, C60, and LiF for high-performance planar perovskite solar cells10.1021/acsami.5b00468 ↗
5. Highly efficient electron transport obtained by doping PCBM with graphdiyne in planar-heterojunction perovskite solar cells10.1021/acs.nanolett.5b00787 ↗
6. Planar perovskite solar cells with 15.75% power conversion efficiency by cathode and anode interfacial modification10.1039/C5TA02265G ↗
7. Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
8. High performance perovskite solar cells10.1002/advs.201500201 ↗
9. Two-dimensional metal halide perovskites: theory, synthesis, and optoelectronics10.1002/smtd.201600018 ↗
10. Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells10.1016/j.nanoen.2014.08.015 ↗
11. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
12. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
13. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
14. Cost-performance analysis of perovskite solar modules10.1002/advs.201600269 ↗
15. Unique properties of halide perovskites as possible origins of the superior solar cell performance10.1002/adma.201306281 ↗
16. Defect density and dielectric constant in perovskite solar cells10.1063/1.4897329 ↗
17. Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation10.1039/C5EE01265A ↗
18. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
19. Current progress and future perspectives for organic/inorganic perovskite solar cells10.1016/j.mattod.2013.12.002 ↗
20. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
21. Improved understanding of the electronic and energetic landscapes of perovskite solar cells: high local charge carrier mobility, reduced recombination, and extremely shallow traps10.1021/ja506936f ↗
22. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
23. Microscopic investigation of grain boundaries in organolead halide perovskite solar cells10.1021/acsami.5b09801 ↗
24. A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions10.1039/C5RA09110A ↗
25. Photovoltaic performance of perovskite solar cells with different grain sizes10.1002/adma.201504144 ↗
26. Modulating crystal grain size and optoelectronic properties of perovskite films for solar cells by reaction temperature10.1039/C5NR08935B ↗
27. Fast preparation of uniform large grain size perovskite thin film in air condition via spray deposition method for high efficient planar solar cells10.1016/j.solmat.2016.12.032 ↗
28. Enhanced grain size, photoluminescence, and photoconversion efficiency with cadmium addition during the two-step growth of CH3NH3PbI310.1021/acsami.6b12627 ↗
29. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
30. Surface and interface aspects of organometal halide perovskite materials and solar cells10.1021/acs.jpclett.6b01951 ↗
31. Growing large columnar grains of CH3NH3PbI3 using the solid-state reaction method enhanced by less-crystallized nanoporous PbI2 films10.1016/j.jpowsour.2017.01.108 ↗
32. A deconvoluted PL approach to probe the charge carrier dynamics of the grain interior and grain boundary of a perovskite film for perovskite solar cell applications10.1039/C7CP01140G ↗
33. Unravelling the effects of grain boundary and chemical doping on electron-hole recombination in CH3NH3PbI3 perovskite by time-domain atomistic simulation10.1021/jacs.6b00645 ↗
34. Numerical simulation and light trapping in perovskite solar cell10.1117/1.JPE.6.025507 ↗
35. Improved efficiency of perovskite-silicon tandem solar cell near the matched optical absorption between the subcells10.1088/1361-6463/aa8655 ↗
36. Numerical simulation: toward the design of high-efficiency planar perovskite solar cells10.1063/1.4885367 ↗
37. Numerical simulation of solar cells and solar cell characterization methods: the open-source on demand program AFORS-HET, version 2.4
38. Low reverse saturation current density of amorphous silicon solar cell due to reduced thickness of active layer10.5370/JEET.2016.11.4.939 ↗
39. Diode equivalent parameters of solar cell
40. Investigation of highly efficient methyl ammonium lead halide perovskite solar cell with non-textured front surface10.1016/j.ijleo.2017.08.141 ↗
41. Effect of p/i interface layer on dark J-V characteristics and Voc in p-i-n solar cells10.1063/1.345340 ↗
42. Single-walled carbon nanotubes enhance the efficiency and stability of mesoscopic perovskite solar cells10.1021/acsami.7b04894 ↗