Morphological and electrical properties of ATSP/p-Si photodiode
Source abstract
Abstract
Abstract Aromatic thermosetting copolyester (ATSP) has been recently introduced, which exhibits promising thermal, mechanical, and adhesive properties to address broad range of industrial applications. However, the ATSP resin has not been well described in terms of electronic properties. Hence, we used a thin film of ATSP as an interfacial layer between a metal and a semiconductor to control the properties of the metal-semiconductor contacts. In this study, ATSP oligomers were dissolved in tetrahydrofuran (THF) and multiple layers were deposited on a p-type Si wafer in thin film form by spin-coating technique. To obtain the metal and semiconductor device (Al/ATSP/p-type Si), Al was sputtered on the back surface of Si wafer as an Ohmic contact and the front surface as a rectifying contact. Morphological properties of the ATSP thin film were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Transmittance and band gap values of the ATSP thin film were determined by ultraviolet-visible (UV–Vis) spectrometry. Al/ATSP/p-type Si devices were characterized with I-V measurements under dark condition and with light illumination. These devices can potentially be developed for use as rectifiers and photodiodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Sze · 2007
2. Thickness-dependent Schottky barrier height of MoS2 field-effect transistors10.1039/C7NR01501A ↗
3. The performances photodiode and diode of ZnO thin film by atomic layer deposition technique10.1016/j.ssc.2016.08.004 ↗
4. Novel WSi/Au T-shaped gate GaAs metal–semiconductor field-effect-transistor fabrication process for super low-noise microwave monolithic integrated circuit amplifiers10.1116/1.587895 ↗
5. Frequency dependent series resistance and interface states in Au/bio-organic/n-GaN Schottky structures based on DNA biopolymer10.1016/j.synthmet.2013.10.012 ↗
6. Electrical characterizations of Au/ZnO/n-GaAs Schottky diodes under distinct illumination intensities10.1007/s10854-016-4843-4 ↗
7. Frequency and voltage dependence of negative capacitance in Au/SiO2/n-GaAs structures10.1016/j.mssp.2011.08.001 ↗
8. Electrical degradation of double-Schottky barrier in ZnO varistors10.1063/1.4944485 ↗
9. On the frequency and voltage dependence of admittance characteristics of Al/PTCDA/P-Si (MPS) type Schottky barrier diodes (SBDs)10.1016/j.compositesb.2013.09.040 ↗
10. An organic Schottky diode (OSD) based on a-silicon/polycarbazole contact10.1016/j.synthmet.2015.05.024 ↗
11. The surface morphology properties and respond illumination impact of ZnO/n-Si photodiode by prepared atomic layer deposition technique10.1016/j.jallcom.2016.08.295 ↗
12. The structural analysis of MWCNT-SiO2 and electrical properties on device application10.1016/j.cap.2017.05.006 ↗
13. Theoretical studies for forecasting the power conversion efficiencies of polymer-based organic photovoltaic cells10.1002/polb.24338 ↗
14. Fabrication of non-fullerene P3HT/Agx-TiO2 based polymer solar cells with high open circuit voltage10.1016/j.jallcom.2017.03.111 ↗
15. Graphene derivatives/Fe3O4/polymer nanocomposite films: optical and electrical properties10.1016/j.matchemphys.2017.02.013 ↗
16. Air-stable vapor phase sensing of ammonia in sub-threshold regime of poly(2,5-bis(3-tetradecylthiophen-2yl)thieno(3,2-b)thiophene) based polymer thin-film transistor10.1016/j.snb.2017.02.063 ↗
17. High performance silicon–organic hybrid solar cells via improving conductivity of PEDOT:PSS with reduced graphene oxide10.1016/j.apsusc.2017.02.193 ↗
18. Deep-blue efficient OLED based on NPB with little efficiency roll-off under high current density10.1007/s00339-017-0840-6 ↗
19. Studying saturation mobility, threshold voltage, and stability of PMMA-SiO2-TMSPM nano-hybrid as OFET gate dielectric10.1016/j.synthmet.2016.09.007 ↗
20. K.L. Mittal, Polyimides and other high temperature polymers : synthesis, characterization and applications, volume 1, VSP, 2001. 〈https://www.crcpress.com/Polyimides-and-Other-High-Temperature-Polymers-Synthesis-Characterization/Mittal/p/book/9789067643399〉. (Accessed 20 May 2017).
21. Adhesion characteristics of aromatic thermosetting copolyester and glass fiber laminates with copper foils for improved circuit boards10.1002/pat.3833 ↗
22. Electrical characterization of Au/poly (linoleic acid)-g-poly(methyl methacrylate) (PLiMMA)/n-Si diode in dark and under illumination10.1016/j.cap.2014.10.017 ↗
23. Schottky diode based on composite organic semiconductors10.1016/j.mssp.2004.05.002 ↗
24. Electrical and photocurrent characteristics of Au/PVA (Co-doped)/n-Si photoconductive diodes10.1016/j.mseb.2012.01.004 ↗
25. Novel high temperature aromatic copolyester thermosets: synthesis, characterization, and physical properties10.1021/ma960862d ↗
26. Aromatic copolyester thermosets: high temperature adhesive properties10.1002/pen.11697 ↗
27. New high strength low-k spin-on thin films for IC application10.1021/ma0518398 ↗
28. New photoimageable dielectric insulating copolyester thin films: synthesis and characterization10.1002/(SICI)1097-4628(19970228)63:9<1199::AID-APP12>3.0.CO;2-V ↗
29. Heat-Induced polycondensation reaction with self-generated blowing agent forming aromatic thermosetting copolyester foams10.1021/acs.macromol.6b00971 ↗
30. Processing of aromatic thermosetting copolyesters into foams and bulk parts: characterization and mechanical properties10.1002/pat.3762 ↗
31. The effects of growth parameters on electrical characteristics of In2S3/n-InP junctions with In2S3 interfacial layer obtained by chemical spray pyrolysis method10.1016/j.matpr.2016.03.069 ↗
32. In situ chemical modification of schottky barrier in solution-processed zinc tin oxide diode10.1021/acsami.6b05953 ↗
33. Ultra-thin epitaxial tungsten carbide schottky contacts in 4H-SiC10.1109/LED.2016.2604488 ↗
34. Electrical characteristics of DNA-based metal-insulator-semiconductor structures10.1063/1.3447985 ↗
35. Electronic and optical properties of electrochemically polymerized polycarbazole/aluminum Schottky diodes10.1063/1.3139277 ↗
36. High barrier Schottky diode with organic interlayer10.1016/j.ssc.2011.12.007 ↗
37. The comparison of electrical characterizations and photovoltaic performance of Al/p-Si and Al/Azure C/p-Si junctions devices10.1016/j.synthmet.2014.12.023 ↗
38. Photodiode and photocapacitor properties of Au/CdTe/p-Si/Al device10.1016/j.jallcom.2015.06.068 ↗
39. The electrical characterizations and illumination response of Co/N-type GaP junction device10.1016/j.cap.2015.05.014 ↗
40. Image force effect on tunneling current for ultra thin high-K dielectric material Al2O3 based metal oxide semiconductor devices10.1166/jno.2015.1812 ↗
41. TEM study on diffusion process of NiFe Schottky and MgO/NiFe tunneling diodes for spin injection in silicon10.1109/TMAG.2010.2040594 ↗
42. Post-annealing processes to improve inhomogeneity of Schottky barrier height in Ti/Al 4H-SiC Schottky barrier diode10.1016/j.mee.2016.01.013 ↗
43. Analysis of temperature-dependant current–voltage characteristics and extraction of series resistance in Pd/ZnO Schottky barrier diodes10.1016/j.physb.2015.07.034 ↗
44. Coupling of carriers injection and charges distribution in Schottky barrier charge-trapping memories using source-side electrons programming10.1088/0268-1242/29/11/115006 ↗
45. A facile growth of spray based ZnO films and device performance investigation for Schottky diodes: determination of interface state density distribution10.1016/j.jallcom.2017.02.198 ↗
46. Controlling of electrical characteristics of Al/p-Si Schottky diode by tris(8-hydroxyquinolinato) aluminum organic film10.1016/j.synthmet.2010.10.005 ↗
47. Analysis of electrical properties of Al/p-Si Schottky contacts with and without rubrene layer10.1016/j.synthmet.2013.01.012 ↗
48. The effect of PVA (Bi2O3-doped) interfacial layer and series resistance on electrical characteristics of Au/n-Si (110) Schottky barrier diodes (SBDs)10.1016/j.cap.2011.08.012 ↗
49. Extraction of Schottky diode parameters from forward current-voltage characteristics10.1063/1.97359 ↗
50. The surface morphology properties and respond illumination impact of ZnO/n-Si photodiode by prepared atomic layer deposition technique10.1016/j.jallcom.2016.08.295 ↗
51. Effect of series resistance on the electrical characteristics and interface state energy distributions of Sn/p-Si (MS) Schottky diodes10.1016/j.mee.2009.11.168 ↗
52. Electrical properties and interface state energy distributions of Cr/n-Si Schottky barrier diode10.1016/j.spmi.2013.10.015 ↗
53. A modified forward I-V plot for Schottky diodes with high series resistance10.1063/1.325607 ↗
54. Au/p-Si Schottky junction solar cell: effect of barrier height modification by InP quantum dots10.1016/j.solmat.2014.08.035 ↗
55. Electrical and photovoltaic properties of Cr/Si Schottky diodes10.1016/j.ijhydene.2008.10.040 ↗