Annealing temperature induced physical characteristics of CuO films grown by magnetron sputtering
Source abstract
Abstract
Abstract CuO films are expected to be an attractive photovoltaic material in the field of optoelectronic device. However, the applications of these films have been limited due to the difficulty in controlling the crystalline quality and conductivity as a result of the undesirable sensitivity to growth conditions. Herein, we report the preparation of CuO films by the radio frequency (RF) magnetron sputtering and then the as-grown films were annealed by the thermal annealing furnace under the annealing temperatures of 300, 500, 700 and 900 °C, respectively. The crystal structures, surface morphology, optical and electrical properties of CuO films were systematically investigated. The X-ray diffraction results revealed that the intensity of CuO (002) diffraction was significantly enhanced while the crystalline orientation was unchanged after annealing. Moreover, the crystal size, interplanar spacing and inhomogeneous strain were also determined. From the image of scanning electron microscope, the surface morphology of CuO films exhibited a transition from pyramid to oval shape with the increase of annealing temperature. The absorption measurement showed the band gap of prepared CuO films varied from 1.485 to 1.631 eV. Moreover, Hall effect indicated the mobility and carrier concentration of the CuO films could be adjusted from 0.026 to 0.316 cm2/v·s and 4.15 × 1018 to 9.23 × 1019 cm-3, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Sec-eliminating the SARS-CoV-2 by AlGaN based high power deep ultraviolet light source
2. External electric field manipulations on structural phase transition of vanadium dioxide nanoparticles and its application in field effect transistor10.1021/jp207196g ↗
3. Adv. Funct. Mater. Low-power consuming, and high sensitive tactile switch based on 2D layered InSe tribotronics
4. Cu2ZnSn(S,Se)4 thin film prepared from a single-step electrodeposited Cu-Zn-Sn-Se precursor10.1016/j.electacta.2011.02.075 ↗
5. Multilayer graphene-GeSn quantum well heterostructure SWIR light source10.1002/smll.201704414 ↗
6. Electrically-driven violet light-emitting devices based on highly stable lead-free perovskite Cs3Sb2Br9 quantum dots10.1021/acsenergylett.9b02096 ↗
7. Near infrared electroluminescence from p-NiO/n-InN/n-GaN light-emitting diode fabricated by PAMBE10.1016/j.jlumin.2017.02.053 ↗
8. Ultraviolet electroluminescence properties from devices based on n-ZnO/i-NiO/p-Si light-emitting diode10.1016/j.optcom.2016.01.071 ↗
9. Study on n-type GaN based organic-inorganic hybrid light emitting heterojunction10.1016/j.jlumin.2018.10.042 ↗
10. Record combination f(max). V-br of 25 THz.V in AlGaN/GaN HEMT with plasma treatment10.1063/1.5090528 ↗
11. Ag nanoparticle surface-plasmon-resonance-enhanced electroluminescence from semipolar n-ZnO/p-GaN heterojunction light-emitting diodes
12. First-principles study of band alignments in the p-type hosts BaM2X2 (M = Cu, Ag; X = S, Se)10.1088/0953-8984/26/15/155802 ↗
13. Mater. Interfaces. Investigation of photovoltaic properties of single core-shell GaN/InGaN wires
14. Effect of interface voids on electroluminescence colors for ZnO microdisk/p-GaN heterojunction light-emitting diodes10.1063/1.4997272 ↗
15. Introducing CuO films as hole transport materials to GaN-based heterojunction LED10.1088/2053-1591/ab6646 ↗
16. Introducing Ga2O3 thin films as novel electron blocking layer to ZnO/p-GaN heterojunction LED10.1007/s00340-012-5219-y ↗
17. Intrinsic defects in ZnO films deposited by RF sputtering10.1080/00150193.2018.1448638 ↗
18. Nickel flux induced effects on structural and optical properties of NiO films fabricated by PA-MOCVD10.1016/j.vacuum.2015.04.034 ↗
19. Structural Optical and electrical properties of polycrystalline CuO thin films prepared by magnetron sputtering10.1007/s11664-018-6525-x ↗
20. Cuprous oxide thin films obtained by dip-coating method using rapid thermal annealing treatments10.1016/j.mssp.2017.06.017 ↗
21. Current status and future prospects of copper oxide heterojunction solar cells10.3390/ma9040271 ↗
22. Electro-optical analysis and numerical modeling of Cu2O as the absorber layer in advanced solar cells
23. Characterization of copper oxide thin films deposited by the thermal evaporation of cuprous oxide (Cu2O)10.1016/j.vacuum.2007.10.004 ↗
24. Evolution of size, morphology, and magnetic properties of CuO nanoparticles by thermal annealing
25. CuO films deposited by superimposed high power impulse and DC magnetron sputtering
26. Structural and magnetic properties of copper oxide films deposited by DC magnetron reactive sputtering10.1007/s00339-018-2141-0 ↗
27. Thickness dependent optical, structural, morphological, photocatalytic and catalytic properties of radio frequency magnetron sputtered nanostructured Cu2O-CuO thin films10.1016/j.ceramint.2020.03.017 ↗
28. Effects of oxygen flow rates on the physical characteristics of magnetron sputtered CuO films10.1016/j.vacuum.2019.108811 ↗
29. Thermal conversion of Cu4O3 into CuO and Cu2O and the electrical properties of magnetron sputtered Cu4O3 thin films10.1007/s00339-018-1666-6 ↗
30. Rapid thermal annealing assisted stability and efficiency enhancement in a sputter deposited CuO photocathode10.1039/C6RA03383K ↗
31. Annealing of an AlN buffer layer in N2-CO for growth of a high-quality AlN film on sapphire
32. Defect evolution in Mg ions implanted GaN upon high temperature and ultrahigh N2 partial pressure annealing: transmission electron microscopy analysis10.1063/1.5140410 ↗
33. Effect of annealing temperature on physical characteristics of CuO films deposited by sol-gel spin coating10.1088/2053-1591/ab44f3 ↗
34. Effect of annealing temperature on morphological, structural and optical properties of nanostructured CuO thin film10.1140/epjp/i2016-16089-3 ↗
35. Growth of Cu2O on Ga-doped ZnO and their interface energy alignment for thin film solar cells10.1063/1.3465445 ↗
36. Characterization of hydrothermal deposition of copper oxide nanoleaves on never-dried bacterial cellulose10.3390/polym11111762 ↗
37. In-situ synthesis of Cu(OH)2 and CuO nanowire electrocatalysts for methanol electro-oxidation
38. Thermal conversion of Cu4O3 into CuO and Cu2O and the electrical properties of magnetron sputtered Cu4O3 thin films10.1007/s00339-018-1666-6 ↗
39. Strain-related phenomena in TiO2 nanostructures spin-coated on porous silicon substrate, Superlattice10.1016/j.spmi.2015.05.048 ↗
40. Photofacilitated controllable growth of ZnO films using photoassisted metal organic chemical vapor deposition10.1021/cg300609f ↗
41. Binary copper oxide semiconductors: from materials towards devices10.1002/pssb.201248128 ↗
42. Effect of vacuum annealing on the structural and optical properties of sputtered Cu4O3 thin films
43. Heteroepitaxy, polymorphism, and faulting in GaN thin films on silicon and sapphire substrates10.1063/1.354414 ↗
44. High-efficiency GaN-based LED with patterned SiO2 current blocking layer deposited on patterned ITO10.1016/j.optlastec.2018.08.049 ↗
45. Effect of annealing temperature on the properties and photocatalytic efficiencies of ZnO nanoparticles10.1016/j.jallcom.2015.04.236 ↗
46. Structural features of the magnetron sputtered CuO/GDC anodes for solid oxide fuel cells10.1088/1742-6596/1393/1/012140 ↗
47. Structural, surface morphological, and optical properties of nanocrystalline Cu2O and CuO films formed by RF magnetron sputtering: oxygen partial pressure effect10.1002/pssa.201127627 ↗
48. Substrate temperature induced physical property variation of InxAl1-xN alloys prepared on Al2O3 by magnetron sputtering10.1016/j.vacuum.2020.109512 ↗
49. Role of threading dislocation structure on the x‐ray diffraction peak widths in epitaxial GaN films10.1063/1.116495 ↗
50. Annealing time modulated the film microstructures and electrical properties of P-type CuO field effect transistors10.1016/j.apsusc.2019.03.130 ↗