Detailed characterization of good-quality SnS thin films obtained by chemical solution deposition at different reaction temperatures
Source abstract
Abstract
Abstract A process for the chemical deposition of good-quality SnS thin films is presented. This process consists of a careful substrate sensitization; the placement of the substrate in a particular angle in the reaction solution; and the use of an aqueous reaction solution composed of stannous chloride, ethanol, triethanolamine, thioacetamide, and ammonium hydroxide. This process enables the deposition of good-quality SnS thin films that are homogenous and strongly adhered to the substrate, even at a temperature of 70 °C. The effect of reaction temperature (40, 45, 50, 55, 60, 65, and 70 °C) on the properties of the SnS thin films was studied by means of X-ray diffraction (including a Rietveld analysis), scanning electron microscopy, X-ray photoelectron spectroscopy, optical spectroscopy, and current photo-response. Rietveld analysis shows the presence of two tin sulfide orthorhombic phases (α-SnS and β-SnS) and a platelet-like microstructure with less than 20% of the total volume oriented in the (111) plane. Surface morphology confirms that grains have platey-like habits. It is found that with increasing reaction temperature the thin films increase in thickness, become more crystalline, and the conductivity photo-response improves, making the prepared SnS thin films suitable for optoelectronic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. Lattice parameters and spontaneous strain in AX2 polytypes: CdI2, PbI2, SnS2 and SnSe210.1107/S0021889889006916 ↗
2. Polymorphism in some IV‐VI compounds induced by high pressure and thin‐film epitaxial growth10.1063/1.1754812 ↗
3. Absorption edge measurements in tin disulphide thin films10.1088/0022-3727/15/6/021 ↗
4. Tin disulfide—an emerging layered metal dichalcogenide semiconductor: materials properties and device characteristics10.1021/nn504481r ↗
5. Physisorption-based charge transfer in two-dimensional SnS2 for selective and reversible NO2 gas sensing10.1021/acsnano.5b04343 ↗
6. Freestanding tin disulfide single-layers realizing efficient visible-light water splitting10.1002/anie.201204675 ↗
7. Fundamental optical absorption in SnS2 and SnSe210.1103/PhysRev.143.536 ↗
8. Simplified chemical deposition technique for good quality SnS thin films10.1088/0268-1242/6/2/014 ↗
9. Phase stability of the earth-abundant tin sulfides SnS, SnS2, and Sn2S310.1021/jp309154s ↗
10. Synthesis, characterization, and electronic structure of single-crystal SnS, Sn2 S3, and SnS210.1021/cm403046m ↗
11. Chemical and lattice stability of the tin sulfides10.1021/acs.jpcc.6b12581 ↗
12. Facile preparation of hexagonal tin sulfide nanoplates anchored on graphene nanosheets for highly efficient sodium storage10.1016/j.jcis.2017.11.025 ↗
13. Comparison of buffer layers on SnS thin-film solar cells prepared by co-evaporation
14. Electronic structure and defect physics of tin sulfides10.1103/PhysRevApplied.6.014009 ↗
15. Structural and chemical transformations in SnS thin films used in chemically deposited photovoltaic cells10.1016/j.tsf.2006.12.078 ↗
16. Polymorphic tin sulfide thin films of zinc blende and orthorhombic structures by chemical deposition10.1149/1.2917198 ↗
17. Chemical bath deposition of SnS films with different crystal structures10.1016/j.matlet.2011.02.017 ↗
18. Preparation and properties of zinc blende and orthorhombic SnS films by chemical bath deposition10.1016/j.apsusc.2011.02.116 ↗
19. Evolution of crystalline structure in SnS thin films prepared by chemical deposition10.1016/j.solidstatesciences.2014.02.002 ↗
20. Cubic and orthorhombic SnS thin-film absorbers for tin sulfide solar cells10.1002/pssa.201532426 ↗
21. Review on Tin (II) sulfide (SnS) material: synthesis, properties, and applications10.1080/10408436.2015.1053601 ↗
22. Vacuum annealed tin sulfide (SnS) thin films for solar cell applications10.1016/j.surfin.2017.12.003 ↗
23. Novel chemical route for chemical bath deposition of Cu2ZnSnS4 (CZTS) thin films with stacked precursor thin films10.1016/j.matlet.2015.09.100 ↗
24. Aqueous bath process for deposition of Cu2ZnSnS4 photovoltaic absorbers10.1016/j.tsf.2010.11.040 ↗
25. Control of phase in tin sulfide thin films produced via RF-Sputtering of SnS2 target with post-deposition annealing10.1007/s11664-015-4137-2 ↗
26. Structural and optical properties of SnS nanoparticles and electron-beam-evaporated SnS thin films10.1080/17458080.2013.788226 ↗
27. Improved mobility of sol-gel method processed transparent tin sulfide thin films10.1016/j.matlet.2016.04.203 ↗
28. Fabrication and optical properties of SnS thin films by SILAR method10.1016/j.apsusc.2008.04.008 ↗
29. Growth and characterization of tin sulphide thin films by chemical bath deposition using ethylene diamine tetra-acetic acid as the complexing agent10.1016/j.tsf.2013.03.013 ↗
30. Preparation of SnS films in chemical solution using microwave irradiation10.1016/j.tsf.2017.06.005 ↗
31. Flexible low–cost infrared photodetector based on SnS thin film grown by chemical bath deposition10.1088/2053-1591/aa91e4 ↗
32. Influence of the deposition parameters on the properties of orthorhombic SnS films by chemical bath deposition10.1016/j.tsf.2011.12.077 ↗
33. Effect of precursor concentration and bath temperature on the growth of chemical bath deposited tin sulphide thin films10.1016/j.apsusc.2011.10.124 ↗
34. SnS-SnO2 conversion of chemically deposited SnS thin films10.1002/amo.860010303 ↗
35. XRD, XPS, optical and electrical studies on the conversion of SnS thin films to SnO210.1016/0040-6090(94)90112-0 ↗
36. Semiconductor thin films by chemical bath deposition for solar energy related applications10.1016/S0927-0248(97)00237-7 ↗
37. Copper tin sulfide semiconductor thin films produced by heating SnS–CuS layers deposited from chemical bath10.1088/0268-1242/18/8/306 ↗
38. Photovoltaic structures using chemically deposited tin sulfide thin films10.1016/j.tsf.2008.11.043 ↗
39. Modifications in SnS thin films by plasma treatments10.1016/j.nimb.2011.01.099 ↗
40. Modification of structure, morphology and physical properties of tin sulfide thin films by pulsed laser irradiation10.1007/s00339-012-7148-3 ↗
41. Heat treatments in chemically deposited SnS thin films and their influence in CdS/SnS photovoltaic structures10.1007/s10854-014-2295-2 ↗
42. Thin film solar cell of SnS absorber with cubic crystalline structure10.1002/pssa.201532405 ↗
43. Crystal structure of a large cubic tin monosulfide polymorph: an unraveled puzzle10.1039/C6CE00647G ↗
44. Thermal stability of “metastable” cubic tin sulfide and its relevance to applications10.1088/1361-6641/aac524 ↗
45. R.E. Banai, H. Lee, S. Zlotnikov, J.R.S. Brownson, M.W. Horn, Phase identification of RF-sputtered SnS thin films using rietveld analysis of X-ray diffraction patterns, in: Proceedings of the 2013 IEEE 39th Photovolt. Spec. Conf., IEEE, 2013, pp. 2562–2566. doi:〈http://dx.doi.org/10.1109/PVSC.2013.6744997〉.10.1109/PVSC.2013.6744997 ↗
46. Chemical bath deposition of SnS thin films: AFM, EDAX and UV-visible characterization
47. Effect of temperature on structural and optical properties of chemically deposited tin sulfide thin films suitable for photovoltaic structures10.4028/www.scientific.net/AMR.665.93 ↗
48. G. Sreedevi, K. Tulasi Ramakrishna Reddy, Properties of tin monosulphide films grown by chemical bath deposition, in: Proceedings of the Conf. Pap. Energy, 2013, pp. 1–5. doi:〈http://dx.doi.org/10.1155/2013/528724〉.10.1155/2013/528724 ↗
49. Lundin · Izv. Akad. Nauk SSSR Neorgan. Mater. · 1965 · 1 · 2102
50. Lundin · Izv. Akad. Nauk SSSR Neorgan. Mater. · 1965 · 1 · 2107
51. Lundin · Izobr. Prom. Obraz. Tovar. Znaki. · 1967 · 44 · 18
52. Deposition of electrically conductive, microwave shielding, and IR-detecting inorganic coatings on polymer films10.1246/cl.1994.551 ↗
53. A simple and low-cost technique for electroless deposition of chalcogenide thin films10.1088/0268-1242/9/6/013 ↗
54. James · 1962 · Vol. II
55. Analysis of low mass absorption materials using glancing incidence X-ray diffraction
56. Handbook of X-ray photoelectron spectroscopy: a reference book of standard spectra for Identification and interpretation of XPS data
57. Hodes · 2002
58. Kinetics of the hydrolysis of thioacetamide in alkaline solution10.1039/p29760001062 ↗
59. Simple thiourea hydrolysis or intermediate complex mechanism? Taking up the formation of metal sulfides from metal–thiourea alkaline solutions10.1080/02603594.2016.1230547 ↗
60. Low cost and large area novel chemical synthesis of Cu2ZnSnS4 (CZTS) thin films10.1016/j.jphotochem.2012.02.006 ↗
61. Optical properties of sputtered SnS thin films for photovoltaic absorbers10.1109/JPHOTOV.2013.2251758 ↗
62. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
63. Recent developments of the program FullProf
64. Crystallography Open Database – an open-access collection of crystal structures10.1107/S0021889809016690 ↗
65. A correction for powder diffraction peak asymmetry due to axial divergence10.1107/S0021889894004218 ↗
66. Determination of the degree of preferred orientation within the March–Dollase approach10.1107/S0021889809013727 ↗
67. A. Herrera-Gomez, The peak-fitting procedure was done with the software AAnalyzer®, 2000. 〈http://www.rdataa.com/AAnalyzer〉.
68. Practical methods for background subtraction in photoemission spectra10.1002/sia.5453 ↗
69. The slope-background for the near-peak regimen of photoemission spectra10.1016/j.elspec.2013.07.006 ↗
70. A. Herrera-Gomez, A rigorous approach to the calculation of the uncertainties in XPS analysis, Internal Report. CINVESTAV-Unidad Queretaro. 〈http://www.qro.cinvestav.mx/~aherrera/reportesInternos/uncertaintiesXPS.pdf〉.
71. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV10.1016/0368-2048(76)80015-1 ↗
72. Widths of the atomic K–N7 levels10.1006/adnd.2000.0848 ↗
73. Deposition of SnS thin films from Sn(II) thioamidate precursors10.1021/acs.cgd.7b01100 ↗
74. Tin monosulfide (SnS) thin films grown by liquid-phase deposition10.1016/j.solener.2016.12.013 ↗
75. Relaxation energies in XPS and XAES of solid sulfur compounds10.1016/0368-2048(94)02129-5 ↗
76. Methods for quantitative analysis in XPS and AES10.1002/sia.740140602 ↗
77. A. Herrera-Gomez, Self consistent ARXPS analysis for multilayer conformal films with abrupt interfaces, Internal Report. CINVESTAV-Unidad Queretaro. 〈http://www.qro.cinvestav.mx/~aherrera/reportesInternos/arxpsAnalysisSharpIntefaces.pdf〉.
78. Instrument-related geometrical factors affecting the intensity in XPS and ARXPS experiments10.1016/j.elspec.2011.08.002 ↗
79. Composition assessment of ferric oxide by accurate peak fitting of the Fe 2p photoemission spectrum10.1002/sia.6124 ↗
80. Accurate peak fitting and subsequent quantitative composition analysis of the spectrum of Co 2p obtained with Al Kα radiation: I: cobalt spinel10.1002/sia.5933 ↗
81. Effect of monochromator X-ray Bragg reflection on photoelectric cross section10.1016/j.elspec.2010.07.009 ↗
82. Atomic subshell photoionization cross sections and asymmetry parameters: 1< Z< 10310.1016/0092-640X(85)90016-6 ↗
83. Calculations of electron inelastic mean free paths. V. Data for 14 organic compounds over the 50–2000 eV range10.1002/sia.740210302 ↗
84. Powell · 2011
85. Growth and properties of cubic SnS films prepared by chemical bath deposition using EDTA as the complexing agent10.1016/j.jallcom.2016.08.066 ↗
86. Chemical bath deposition of thin nanocrystalline tin(II) sulfide films with thioacetamide10.1134/S1070427217010141 ↗
87. First principles study of point defects in SnS10.1039/C4CP03010A ↗
88. Route to n -type doping in SnS10.1063/1.4918294 ↗
89. Large cubic tin sulfide–tin selenide thin film stacks for energy conversion10.1016/j.tsf.2016.07.048 ↗
90. Effect of deposition time on structural, electrical, and optical properties of SnS thin films deposited by chemical bath deposition10.1016/j.apsusc.2010.07.104 ↗
91. Pankove · 1975
92. Chemical bath deposition of PbS thin films on float glass substrates using a Pb(CH3COO)2–NaOH–(NH2)2CS–N(CH2CH2OH)3–CH3CH2OH definite aqueous system and their structural, optical, and electrical/photoelectrical characterization10.1016/j.tsf.2013.02.035 ↗
93. Thin films of tin sulphide for use in thin film solar cell devices10.1016/j.tsf.2008.11.023 ↗
94. Preparation of SnS films with zinc blende structure by successive ionic layer adsorption and reaction method10.1016/j.matlet.2010.07.002 ↗
95. Preparation and the growth mechanism of zinc blende structure tin sulfide films by successive ionic layer adsorption and reaction10.1016/j.jcrysgro.2010.07.001 ↗