Electrochemical properties of BiFeO 3 nanoparticles: Anode material for sodium-ion battery application
Source abstract
Abstract
Abstract We report on synthesis and possibilities of utilizing BiFeO 3 (BFO) nanoparticles and bulk materials as an anode component for sodium (Na) ion batteries. XRD and Raman spectroscopy measurements shows that as synthesized BFO exhibits rhombohedrally distorted perovskite structure. Cyclic voltammetry (CV) reveals that conversion redox mechanism takes place at first discharge and subsequently two alloying process. The specific capacity of BFO bulk material is seen to be 650 mAh/g at first cycle and gradually decreases to 250 mAh/g after 30 cycles (0.1 C rate). After 30 cycles, capacity fading takes place very slowly and is observed to be 180 mAh/g at 100th cycle. The discharge capacity of BFO material at different current rates is carried out and the better performance is seen at the current rates of 25 mA/g. The conversion reaction mechanism during the electrochemical reaction in BiFeO 3 is probed by combining ex-situ XRD and XPS measurements after electrochemical cycling. CV of BFO nanoparticles exhibit very stable performance. Whereas, the charge discharge curve shows similar capacity fading as the bulk BFO. High initial capacity of BiFeO 3 gives an indication that it can be utilized as an anode component for Na ion batteries after stabilizing the capacity fading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Multiferroics and related materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The effect of LiBF4 concentration on the discharge and stability of LiMn2O4 half cell Li ion batteries10.1016/j.mssp.2015.04.018 ↗
2. Epitaxial LiCoO2 films as a model system for fundamental electrochemical studies of positive electrodes10.1021/am508512q ↗
3. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
4. Challenges facing lithium batteries and electrical double-layer capacitors10.1002/anie.201201429 ↗
5. Metal hydrides for lithium-ion batteries10.1038/nmat2288 ↗
6. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
7. Enabling sodium batteries using lithium-substituted sodium layered transition metal oxide cathodes10.1002/aenm.201000061 ↗
8. Hollow cobalt selenide microspheres: synthesis and application as anode materials for Na-ion batteries10.1021/acsami.5b11963 ↗
9. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
10. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
11. Use of graphite as a highly reversible electrode with superior cycle life for sodium-ion batteries by making use of Co-intercalation phenomena10.1002/anie.201403734 ↗
12. Ultrathin nickel oxide nanosheets for enhanced sodium and lithium storage10.1016/j.jpowsour.2014.10.105 ↗
13. α-MoO3: a novel high performance anode material for sodium-ion batteries10.1016/j.elecom.2013.02.020 ↗
14. Transition metal oxides for high performance sodium ion battery anodes10.1016/j.nanoen.2014.02.002 ↗
15. Electrochemical insertion of Li and Na ions into nanocrystalline Fe3O4 and γ-Fe2O3 for rechargeable batteries10.1149/1.3254160 ↗
16. Uniformly dispersed self-assembled growth of Sb2O3/Sb@Graphene nanocomposites on a 3D carbon sheet network for high Na-storage capacity and excellent stability10.1039/C4TA06825D ↗
17. An SbOx/reduced graphene oxide composite as a high-rate anode material for sodium-ion batteries10.1021/jp507116t ↗
18. High capacity Sb2O4 thin film electrodes for rechargeable sodium battery10.1016/j.elecom.2011.09.020 ↗
19. Electrochemical Na-insertion/extraction properties of SnO thick-film electrodes prepared by gas-deposition10.1016/j.jpowsour.2013.09.046 ↗
20. MoS2 nanoflowers with expanded interlayers as high-performance anodes for sodium-ion batteries10.1002/anie.201407898 ↗
21. Direct atomic-scale confirmation of three-phase storage mechanism in Li4Ti5O12 anodes for room-temperature sodium-ion batteries10.1038/ncomms2878 ↗
22. Effect of molecular weight and degree of substitution of a sodium-carboxymethyl cellulose binder on Li4Ti5O12 anodic performance10.1021/jp311678p ↗
23. Anatase TiO2 nanoparticles for high power sodium-ion anodes10.1016/j.jpowsour.2013.11.083 ↗
24. Atomic structure of highly strained BiFeO3 thin films10.1103/PhysRevLett.108.047601 ↗
25. Switchable ferroelectric diode and photovoltaic effect in BiFeO310.1126/science.1168636 ↗
26. Above-bandgap voltages from ferroelectric photovoltaic devices10.1038/nnano.2009.451 ↗
27. Multiferroic bismuth ferrite-based materials for multifunctional applications: ceramic bulks, thin films and nanostructures10.1016/j.pmatsci.2016.09.001 ↗
28. Enhancement of ferromagnetic and ferroelectric properties in calcium doped BiFeO3 by chemical synthesis10.1016/j.ceramint.2015.03.086 ↗
29. Electrochemical properties of BiFeO3 thin films prepared by pulsed laser deposition10.1142/S1793604709000740 ↗
30. Effect of oxygen annealing on magnetic, electric and magnetodielectric properties of Ba-doped BiFeO310.1016/j.physb.2009.11.007 ↗
31. Microwave-hydrothermal synthesis of perovskite bismuth ferrite nanoparticles10.1016/j.materresbull.2011.08.010 ↗
32. Polarized Raman scattering of multiferroic BiFeO3 epitaxial films with rhombohedral R3c symmetry10.1063/1.2168038 ↗
33. Structural, magnetic, and optical properties of Pr and Zr Codoped BiFeO3 multiferroic ceramics10.1063/1.4761968 ↗
34. Experimental and theoretical evidence of enhanced ferromagnetism in sonochemical synthesized BiFeO3 nanoparticles10.1063/1.3525573 ↗
35. Photovoltaic property of anatase TiO2 3-D mesoflowers10.1021/sc500642c ↗
36. Preparation of La-doped BiFeO3 thin films with Fe2+ ions on Si substrates10.1063/1.2195368 ↗