journal article·2019-02

Annealing temperature of nanostructured SnS on the role of the absorber layer

Mohsen Cheraghizade, Farid Jamali-Sheini, Pejman Shabani

Publisher page

Abstract

Abstract This study reports an experimental and theoretical research on the optimal annealing temperature, absorber layer thickness, and operational temperature of nanostructured SnS-based solar cells fabricated using the ethyl cellulose binder. The SnS powder was synthesized by a co-precipitation method. Characterization of the prepared powder by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) revealed polycrystalline orthorhombic nanostructures with a mean size lower than 50 nm while UV–Vis-NIR and photoluminescence (PL) spectroscopies showed the suitability of the nanostructures for photovoltaic applications. According to the initial assessments, the SnS nanostructures were used to fabricate solar cell devices by depositing a blocking layer (BL) and an electron transport layer (ETL), as the buffer layers, and annealing the absorber SnS layer at 200–500 ℃. To determine the optimal annealing temperature, different measurements were performed. Based on the obtained results, the sample annealed at the lowest temperature (200 ℃) can present the highest efficiency (0.58%) by producing the highest carrier concentration and minimizing the scatter of carrier transportation in its crystalline lattice. Also, this sample shows best external quantum efficiency (EQE) about 44% and the lowest charge-transfer resistance by improving carrier collection. Finally, SCAPS simulation program was conducted evaluate the effect of the absorber's thickness and the operational temperature on the performance of the fabricated solar cells. The simulation results were further validated by conducting additional experiments. Obtained results show an increase in thickness and operational temperature resulted in a corresponding increase and decrease in the efficiency of our solar cells, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Annealing temperature dependence of photovoltaic properties of solar cells containing Cu2SnS3 thin films produced by co‐evaporation10.1002/pssb.201400297 ↗
2. Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells10.1002/pip.2504 ↗
3. Photocurrent properties of undoped and Pb-doped SnS nanostructures grown using electrodeposition method10.1007/s11664-015-4079-8 ↗
4. Examining the effect of Zn dopant on physical properties of nanostructured SnS thin film by using electrodeposition10.1007/s10800-015-0913-1 ↗
5. Effect of thickness on the optoelectronic properties of electrodeposited nanostructured SnS films10.1007/s11082-018-1598-6 ↗
6. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
7. Overcoming Efficiency limitations of SnS‐based solar cells10.1002/aenm.201400496 ↗
8. SnS-based thin film solar cells: perspectives over the last 25 years
9. Enhanced photovoltaic performance of tin sulfide nanoparticles by indium doping10.1557/mrc.2016.48 ↗
10. The effect of tin sulfide quantum dots size on photocatalytic and photovoltaic performance10.1016/j.matchemphys.2017.04.008 ↗
11. Influence of sintering temperature on screen printed Cu2ZnSnS4 (CZTS) films10.1016/j.jallcom.2012.06.069 ↗
12. High-performance dye-sensitized solar cells based on Ag-doped SnS2 counter electrodes10.1039/C5TA10234K ↗
13. Cu2ZnSnS4 films by paste coating and their optoelectronic properties
14. Cu2ZnSnSe4 absorbers processed from solution deposited metal salt precursors under different selenization conditions10.1002/pssa.201228003 ↗
15. Effect of annealing temperature on the performances and electrochemical properties of TiO2 dye-sensitized solar cells10.1166/sam.2012.1339 ↗
16. P.D.F. ICDD. International Centre for Diffraction Data. Powder Diffraction File, Newtown Square, Pennsylvania, USA, 1997.
17. Electrochemical deposition of nanostructured SnS1−xTex thin films and their surface characterization10.1016/j.jallcom.2016.10.100 ↗
18. Microwave-assisted solvothermal synthesis and optoelectronic properties of γ-MnS nanoparticles
19. SnS nanosheet films deposited via thermal evaporation: the effects of buffer layers on photovoltaic performance10.1016/j.solmat.2016.04.006 ↗
20. The physical properties of SnS films grown on lattice-matched and amorphous substrates10.1002/pssa.200925379 ↗
21. Influence of growth conditions on the electrochemical synthesis of SnS thin films and their optical properties10.1007/s12613-016-1244-x ↗
22. Ultrasonic synthesis of In-doped SnS nanoparticles and their physical properties10.1016/j.solidstatesciences.2018.03.005 ↗
23. First principles study of point defects in SnS10.1039/C4CP03010A ↗
24. Highly efficient photo-degradation of methyl blue and band gap shift of SnS nanoparticles under different sonication frequencies10.1016/j.mssp.2014.12.059 ↗
25. Optical, electrical, and photovoltaic properties of PbS thin films by anionic and cationic dopants10.1007/s00339-017-0932-3 ↗
26. Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS10.1063/1.3675880 ↗
27. Pb-doped Cu3Se2 nanosheets: electrochemical synthesis, structural features and optoelectronic properties10.1016/j.solener.2018.06.082 ↗
28. Investigation of the optoelectronic behavior of Pb-doped CdO nanostructures10.1007/s13204-018-0705-0 ↗
29. A review of tin (II) monosulfide and its potential as a photovoltaic absorber10.1016/j.solmat.2015.12.001 ↗
30. Investigations on solution derived aluminium doped zinc oxide thin films10.1016/S0921-5107(03)00128-4 ↗
31. Sputtered deposited nanocrystalline ZnO films: a correlation between electrical, optical and microstructural properties10.1007/s00339-004-3197-6 ↗
32. Surface passivation of lead sulfide nanocrystals with low electron affinity metals: photoluminescence and photovoltaic performance10.1039/C5CP07987J ↗
33. M. Burgelman. SCAPS-a Solar Cell Capacitance Simulator.
34. A modeling study on utilizing SnS2 as the buffer layer of CZT(S, Se) solar cells10.1016/j.solener.2018.04.010 ↗
35. Development of thin film solar cell based on Cu2ZnSnS4 thin films10.1016/S0927-0248(00)00088-X ↗
36. Numerical modeling of thermal behavior and structural optimization of a-Si:H solar cells at high temperatures10.1007/s10825-016-0913-3 ↗
37. Temperature dependent photovoltaic (PV) efficiency and its effect on PV production in the world – a review10.1016/j.egypro.2013.05.072 ↗
38. A comprehensive device modelling of perovskite solar cell with inorganic copper iodide as hole transport material10.1088/1361-6641/aaa596 ↗
39. Identifying the cause of voltage and fill factor losses in perovskite solar cells by using luminescence measurements10.1002/ente.201700374 ↗
40. The role of back surface field SnS layer in improvement of efficiency of CdTe thin film solar cells10.1016/j.ijleo.2016.04.050 ↗
41. Improve the performance of CZTSSe solar cells by applying a SnS BSF layer10.1016/j.sse.2017.12.004 ↗
42. Numerical analysis of TiO2/Cu2ZnSnS4 nanostructured PV using SCAPS-1D
43. M. Dey, M. Dey, N. Rahman, I. Tasnim, R. Chakma, U. Aimon, et al. Numerical modeling of SnS ultra-thin solar cells, in: Proceedings of the 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE), 2017. pp. 911–915.10.1109/ECACE.2017.7913033 ↗
44. Enhanced visible light photocatalytic activity of interlayer-isolated triplex Ag@SiO2@TiO2 core-shell nanoparticles10.1039/c3nr00044c ↗