journal article·2020-02

Experimental study on slicing photovoltaic polycrystalline silicon with diamond wire saw

Youkang Yin, Yufei Gao, Xinying Li, Tianzhao Pu, Liyuan Wang

Publisher page

Abstract

Abstract At present, polycrystalline silicon photovoltaic cells play a dominant role in silicon-based solar cells because of its advantages such as relatively simple preparation process and relatively low cost. Slicing is the first mechanical processing procedure for battery cells, the quality of sawn surface affects the cost of subsequent processes such as texture making, also affects the breaking strength of battery cells and the photoelectric conversion efficiency and other performances. In this paper, polycrystalline silicon sawing experiments are carried out, and the effects of main process parameters, such as the workpiece feed speed, the wire moving speed, the ratio of the workpiece feed speed to the wire moving speed, and the sawn workpiece size, on the surface morphology and roughness Ra of the photovoltaic polycrystalline silicon slice are analyzed. Orthogonal experimental method was used to analyze the primary and secondary order and positive and negative effects of various factors on surface morphology and surface roughness, the optimum process parameters were obtained, and the wear morphology and mechanism of wire were analyzed. The research results show that: within the range of process parameters studied in this paper, the surface morphology of polycrystalline silicon slices shows a comprehensive effect of material ductility and brittleness removal. Reducing the workpiece feed speed and size, increasing the wire moving speed will increase the proportion of the ductile smooth area on the slice surface and decrease the surface roughness Ra value, the slice surface roughness Ra value is basically unchanged when workpiece feed speed and wire speed change at the same time but the ratio of them remains constant. Compared with the wire moving speed and the workpiece size, the workpiece feed speed has the greatest influence on the surface morphology and roughness. Abrasive falling off and coating wear are the main wear forms of the wire.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Performance evaluation of large solar photovoltaic power plants in Spain10.1016/j.enconman.2018.12.116 ↗
2. Silicon solar cells: toward the efficiency limits
3. A review of the environmental factors degrading the performance of silicon wafer-based photovoltaic modules: failure detection methods and essential mitigation techniques10.1016/j.rser.2019.04.024 ↗
4. A techno-economic review of silicon photovoltaic module recycling10.1016/j.rser.2019.04.020 ↗
5. Generation and combination of the solar cells: A current model review10.1002/ese3.292 ↗
6. Large-Scale fabrication of silicon nanowires for solar energy applications10.1021/acsami.7b06620 ↗
7. Texture for diamond wire sawn multicrystalline silicon wafers by a vapor etching method
8. A review on surface texturing technology for multicrystalline silicon
9. Evolution and present status of silicon carbide slurry recovery in silicon wire sawing10.1016/j.resconrec.2015.08.009 ↗
10. Diamond wire sawing of solar silicon wafers: A sustainable manufacturing alternative to loose abrasive slurry sawing10.1016/j.promfg.2018.02.156 ↗
11. Loss of wire tension in the wire web during the slurry based multi wire sawing process10.1016/j.solmat.2013.05.047 ↗
12. Optoelectronic properties of Black-Silicon generated through inductively coupled plasma (ICP) processing for crystalline silicon solar cells10.1016/j.apsusc.2015.11.241 ↗
13. A simple and low-cost chemical etching method for controllable fabrication of large-scale kinked silicon nanowires10.1016/j.matlet.2017.03.131 ↗
14. A comprehensive study on slicing processes optimization of silicon ingot for photovoltaic applications10.1016/j.solener.2017.12.040 ↗
15. Investigation on removal features of fixed abrasive diamond pellets based on elasticity tool10.1007/s00170-016-9726-6 ↗
16. Wire sawing technology: A state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
17. Distribution of diamond grains in fixed abrasive wire sawing process10.1007/s00170-014-5782-y ↗
18. Depth of cut per abrasive in fixed diamond wire sawing10.1007/s00170-015-7089-z ↗
19. The effect of cut depth and distribution for abrasives on wafer surface morphology in diamond wire sawing of PV polycrystalline silicon10.1016/j.mssp.2018.12.004 ↗
20. Roughness damage evolution due to wire saw process10.1007/s12541-011-0126-4 ↗
21. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
22. Surface characteristics and damage distributions of diamond wire sawn wafers for silicon solar cells10.3934/matersci.2016.2.669 ↗
23. Analytical force modeling of fixed abrasive diamond wire saw machining with application to SiC monocrystal wafer processing10.1115/1.4034792 ↗
24. Study on diamond wire wear, surface quality, and subsurface damage during multi-wire slicing of c-plane sapphire wafer10.1007/s00170-018-2656-8 ↗
25. Research on the machinability of A-plane sapphire under diamond wire sawing in different sawing directions10.1016/j.ceramint.2019.02.086 ↗
26. Study of ductile-to-brittle transition in single grit diamond scribing of silicon: application to wire sawing of silicon wafers10.1115/1.4006177 ↗
27. Subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing10.1016/j.mssp.2016.10.021 ↗