journal article·2019-11

Material removal and surface generation mechanisms in diamond wire sawing of silicon crystal

Yufei Gao, Peiqi Ge, Lei Zhang, Wenbo Bi

Publisher page

Abstract

Abstract Silicon crystal is usually first cut into wafers in the applications of electronic devices and photovoltaic solar cells. At present, fixed abrasive wire sawing technology has been widely used in slicing. The mechanism of material removal and surface generation during wire sawing is the key basic problem to study the surface quality of sliced wafers, which is important to realize high-precision slicing. This paper presents theoretical analysis on the relationship between the average cutting depth of abrasives distributing in different positions along the wire circumferential surface and the process parameters. The wire sawing experiments of single crystal silicon were carried out, then the morphologies of sawn surface and swarf were observed, the surface roughness was measured and analyzed, the material removal and surface generation mechanism of single crystal silicon cut by electroplated diamond sawing wire were addressed. Research results show that there is an approximate non-linear increasing relationship between the average cutting depth of the abrasives and the ratio of the workpiece feed speed to the wire speed, and the abrasives cutting depth and surface roughness of sliced wafers increases with the increasing of ratio value. It is difficult to obtain the sliced surface in a fully ductile mode of material removal in the actual wire sawing process because there are always a small amount of abrasives with high protrusion on the wire surface whose cutting depths are greater than the critical ductile regime cutting depth, but adopting a low ratio can make the generation of the sliced wafer surface in near-ductile or local-ductile material removal mode which can produce high quality wafer surface. This research is expected to be useful in optimizing the combination of process parameters in fixed abrasive diamond wire saw precision slicing of silicon wafers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A comprehensive study on slicing processes optimization of silicon ingot for photovoltaic applications10.1016/j.solener.2017.12.040 ↗
2. Diamond wire sawing of solar silicon wafers: a sustainable manufacturing alternative to loose abrasive slurry sawing
3. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
4. Mechanical strength of silicon wafers cut by loose abrasive slurry and fixed abrasive diamond wire sawing10.1002/adem.201100263 ↗
5. Thin Czochralski silicon solar cells based on diamond wire sawing technology10.1016/j.solmat.2011.11.028 ↗
6. Experiment study on electroplated diamond wire saw slicing single-crystal silicon10.1016/j.mssp.2016.08.003 ↗
7. Determination of the impact of the wire velocity on the surface damage of diamond wire sawn silicon wafers10.1016/j.egypro.2015.07.124 ↗
8. Analytical force modeling of fixed abrasive diamond wire saw machining with application to SiC monocrystal wafer processing10.1115/1.4034792 ↗
9. Ductile-regime grinding: a new technology for machining brittle materials10.1115/1.2899676 ↗
10. Brittle-ductile transition in diamond cutting of silicon single crystals10.1081/AMP-100108519 ↗
11. Study of ductile-to-brittle transition in single grit diamond scribing of silicon: application to wire sawing of silicon wafers10.1115/1.4006177 ↗
12. Effect of grit shape and crystal structure on damage in diamond wire scribing of silicon10.1111/jace.14732 ↗
13. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments10.1016/j.mssp.2017.10.027 ↗
14. Generation of diamond wire sliced wafer surface based on the distribution of diamond grits10.1007/s12541-014-0401-2 ↗
15. Depth of cut per abrasive in fixed diamond wire sawing10.1007/s00170-015-7089-z ↗
16. The effect of cut depth and distribution for abrasives on wafer surface morphology in diamond wire sawing of PV polycrystalline silicon10.1016/j.mssp.2018.12.004 ↗
17. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
18. Effect of crystal defects on mechanical properties relevant to cutting of multicrystalline solar silicon10.1016/j.mssp.2013.05.016 ↗
19. Fracture strength of silicon wafers sawn by fixed diamond wire saw10.1016/j.solener.2017.08.063 ↗
20. Elastic/plastic indentation damage in ceramics: the lateral crack system
21. Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processes10.1016/j.jmatprotec.2007.11.118 ↗
22. Theoretical analysis on the effects of crystal anisotropy on wiresawing process and application to wafer slicing10.1016/j.ijmachtools.2005.07.003 ↗
23. Coupling stress caused by thermal and slicing force in KDP crystal slicing with fixed abrasive wire saw10.1007/s00170-018-1893-1 ↗
24. Erosion and damage by sharp particles10.1016/S0043-1648(98)00187-2 ↗
25. Computer simulation in Backlapping of wiresaw sliced semiconductor wafers
26. Investigation of long waviness induced by the wire saw process. Proceedings of the institution of mechanical engineers
27. Finite element analysis for grinding and lapping of wire-sawn silicon wafers10.1016/S0924-0136(02)00565-4 ↗