journal article·2004-02

Schottky diode based on composite organic semiconductors

R.K Gupta, R.A Singh

Publisher page

Abstract

Abstract A Schottky diode with configuration Pt/ PAn–PVC/In is fabricated using composite of polyaniline with polyvinyl chloride (PAn–PVC). Current–voltage ( I – V ) plots were non-linear and capacitance–voltage ( C – V ) plots were almost linear in reverse bias indicating rectification behavior. The observed current–voltage characteristics can be satisfactorily fitted using the modified Schottky equation. Various junction parameters were calculated from the temperature-dependent I – V and C – V data and discussed. The carrier concentration from 1/ C 2 – V plots varies from 2.70×10 16 cm −3 at room temperature to 4.62×10 16 cm −3 at 343 K. Impedance studies shows the R(RC)(RC) equivalent circuit for the fabricated Schottky diode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Gutman · 1967
2. Schottky barrier formation betweem polypyrrole and indium10.1016/0379-6779(87)90962-3 ↗
3. Resistance of polyaniline films as a function of electrochemical potential and the fabrication of polyaniline-based microelectronic devices10.1021/j100254a028 ↗
4. Polymer based devices their function and characterization10.1016/0379-6779(93)90564-D ↗
5. Electronic applications of semiconducting polymers
6. Optimization of the dark and photovoltaic properties of Schottky junction between aluminium and conjugated polymers10.1016/S0379-6779(98)00786-3 ↗
7. Field effect transistor with the water- soluble self–acid-doped polyaniline thin films as semiconductor10.1016/S0379-6779(97)04072-1 ↗
8. Gas-sensitive characteristics of metal/semiconductor polymer Schottky device10.1016/S0924-4247(00)00465-9 ↗
9. Margolis · 1989
10. Polymer composites of charge- transfer materials-I phenothiazine- iodine (2:3) in poly vinylchloride
11. Composite films of nanostructured polyaniline with poly vinyl alcohol10.1016/S0379-6779(01)00669-5 ↗
12. Properties of the heterojunction between poly dithieopyrrole–poly vinylchloride composite and n-doped silicon10.1016/0379-6779(95)03382-T ↗
13. Analysis and simulation of the IV-characteristics of PPV-oligomer based Schottky diodes10.1016/S0379-6779(00)01334-5 ↗
14. Schottky diodes based on some semiconducting polymers10.1016/S0379-6779(00)01439-9 ↗
15. Soluble polyaniline co-doped with dodecylbenzene sulfonic acid and hydrochloric acid10.1016/S0379-6779(99)00179-4 ↗
16. Rubner · 1992
17. Junction properties of Schottky diode with chemically prepared copolymer having hexylthiophene and cyclohexylthiophene units10.1016/S1567-1739(02)00220-1 ↗
18. Metal–polymer Schottky barrier on cast films of soluble poly 3-alkylthiophenes10.1016/0379-6779(87)90571-6 ↗
19. Fabrication and characterization of Schottky barrier diodes with tetracyanoquinodimethane doped with bis β-naphthyl-tetrathiafulvalene10.1016/S0379-6779(97)80041-0 ↗